Professional Documents
Culture Documents
ESSOM Catalog
ESSOM Catalog
ABOUT ESSOM
Introduction
ESSOM was founded in 1986 by a group of engineers. Our main objective was to market DeVilbiss paint spray equipment. A few
years later the company began to manufacture engineering education equipment. Over the years, paint spray equipment from Binks,
Ransburg and Nihon Parkerizer were added. At the same time, engineering education equipment has grown from import substitute to
worldwide export.
Location
Our head office is located on Taksin road in Bangkok metropolis while our factory is in Nakornpathom which is 30 km to the west. The
factory comprises machine shop, fabrication areas, electrical shop, paint shop, design office, test area, finished product warehouse,
show rooms, training room and factory administration office, covering a total area of ove r 2000 square meters.
Products
Development of new products is based on market requirements as
well as trend in educational innovation and technological
development. Most of our equipments are available for inspection
and/or test run in our factory show room. Popular items are normally
deliverable from stock. In addition, we also build special equipment
for research and other purposes to meet client special requirement as
well as providing assistance in planning new laboratory.
All products are supplied with completed operating manuals.
Software with software manual are also available as optional items.
Services
2
MOVING FORWARD
Dear Customers,
Welcome to ESSOM 2017 brief catalog. Here products are arranged in sub-groups for quick reference. A relatively
new product group – Mechanical Engineering Test Sets (MM500) are expanded and overlap with other Theory of
Machine (MM) and Structures (ST) products. Also Structures (ST) products are now modified to include computer
assist sets. New products are added in Thermodynamics (TH), particularly in heat exchangers and refrigeration.
With the ISO 9001:2015 Quality Management System, we are committed to th e Continuous Improvement policy
particularly on product design and appearance as well as instruction manual improvement to be among the world
leaders in this field of engineering education. We appreciate your continued suggestions and supports to help us serve
you better.
Thank you
(Naris Srinilta)
Managing Director
HF530 FLOW CHANNEL TRAINING TH136 COMPACT STEAM TURBINE POWER PLANT
for Capital University of Science and TRAINING for Mapua University,
Technology and COSMOS, Pakistan. Philippines.
HB012 HYDROSTATIC MP315D SUBSONIC WIND TUNNEL HT210 PELTON TURBINE TEST SET
PRESSURE TRAINING TRAINING for Akademi Teknik Dan TRAINING for The Nelson Mandela
for University of Sargodha, Keselamatan Penerbangan, African Institution of Science and
Pakistan Indonesia Technology, Tanzania.
3
TESTIMONIALS
The advice I am giving always to all my engineering The steam power plant trainer acquired by the Mapua
students and colleagues is above all to study the lab University is instrumental in conveying engineering
apparatuses overwhelmingly the state-of-the-art ESSOM knowledge and skills to our engineering students.
lab apparatuses for instructional purposes and students Modern instrumentation and controls as well as data
utilisation are quantum leaps upward. I am confident that processing were also integrated to its system.
ESSOM will not only be soon at par with the world-wide experiments prescribed by our ME program are covered
giant manufacturers in this arena but will have leapfrog by the equipment specifications and would require less
products for science and engineering research as well.” effort to modify the system to adopt to other requirement.
therefore, the equipment enhances our capability to do
research and provide a real life experience to our
students.
UNISA has purchased all its Thermodynamics equipment I have been using the essom laboratory equipment since
from ESSOM, and herewith we would like to express our 2011 and found these up to my full satisfaction. The
satisfaction with the products. significant parameter is the value of money. The
equipment is cost effective and don’t compromise the
The equipment is effective; experiments are repeatable
with a high degree of accuracy and a great deal more quality at any level. Quality sensors are used for precise
value for money. measurements in all of equipment while rugged and
durable parts increase the effective life of equipment.
We have commissioned some of the equipment and are Another advantage is the possibilities of equipment to be
now in the process on commissioning the Steam Power tailored as per specific requirements/ situations. Their
Plant. The Boiler is working well. aftersales service and response to queries is
exceptionally surpassing, at least, in our region of the
I am pleased with the progress made so far. I hope we will
have a good working relationship, throughout the world. I am satisfied with the products I have used so far.
considerable long life-span of this equipment.
4
CONTENTS
Page
HB : HYDRAULICS BENCH 6
AND ACCESSORIES
HF : FLOW MEASUREMENT 9
AND FLOW STUDY
RE : RENEWABLE ENERGY 16
MT & TH : THERMODYNAMICS 17
TM : STRENGTH AND 23
PROPERTY OF MATERIALS
MM : MACHINE ELEMENTS 24
AND THEORY OF MACHINES
ST : STRUCTURES 27
AND ACCESSORIES
5
HYDRAULICS BENCH AND ACCESSORIES
The Hydraulics Bench is a primary unit to provide water supply and flow measurement for various experiments on fluid properties. Each
experiment requires specific accessory. Learning software is available for most experiments .
BASIC UNITS
HB 100 HYDRAULICS BENCH HB 100G HYDRAULIC BENCH, Gravimetric HB 101 BASIC HYDRAULIC BENCH
For water supply and measurement of For water supply and measurement of weight A simple bench for supply and measurement
volume flow rate. A 0.37 kW pump with 10 rate of flow. A 0. 37 kW Pump with 45 kg of volume flow rate. A 0. 37 kW pump with
and 45 lt measuring tank and storage tank measuring tank, weights and storage tank. water meter and storage tank.
6
HYDRAULICS BENCH AND ACCESSORIES
HB 026 LAMINAR FLOW APPARATUS HB 027 MINI FLOW CHANNEL HB 041 CAVITATION PANEL
Channel size 260 mm wide x 360 mm long, Channel and dye reservoir with stream line Transparent Venturi tube with pressure
source/sink holes, dye reservoir with stream needles. Models: small and large cylinder, gauges. For use with Hydraulics Bench or
lines, various rubber models. narrow crested, broad crested weir, crump outside water supply.
weir, symmetrical and asymmetrical aerofoil.
7
HYDRAULICS BENCH AND ACCESSORIES
MISCELLANEOUS
SP 111 ARCHIMEDES PRINCIPLE SP 112 PASCAL’S APPARATUS SP 113 BOYLE’S LAW APPARATUS
APPARATUS Four different glass vessels, vessel holder An acrylic tube on stand with scale, a
A solid metal and a hollow clear acrylic with pressure balancing beam, a load pressure gauge, a pressure relief valve and
cylinder, a spring balance, a beaker and a hanger, weights and a stand. control valves.
stand.
PH 100 MANOMETERS
Water, inclined water, and mercury manometers
for both water and air pressure measurements.
Various ranges are available.
8
FLOW MEASUREMENT AND FLOW STUDY EQUIPMENT
HF 135 PIPING LOSS TEST SET, Large HF 135A PIPING LOSS APPARATUS, Large
A self-contained set for measuring losses with primary flow A panel type for measuring losses with primary flow measuring
measuring devices, differential pressure measuring devices, pump devices and differential pressure measuring devices for use with a
and storage tank. Hydraulics Bench or outside water supply.
HF 125 PIPING LOSS TEST SET, Small HF 125A PIPING LOSS APPARATUS, Small
Similar to HF135 with only measuring losses. Similar to HF135A with only measuring losses.
HF 171 CAVITATION TEST SET HF 235 FLOW MEASUREMENT TEST SET HF 150 PIPE NETWORK APPARATUS
A self-contained unit. Transparent A self-contained set with Venturi meter, orifice A set of pipes and manifolds for studying
Venturi tube, pressure gauges, pump meter, Pitot tube, variable area flow meter, flow in pipes under various network
and variable area flow meter. water meter, measuring tank and manometers. configuration with differential pressure
Storage tank and pump. measuring devices and Hydraulics
. Bench
measuring
9
FLOW MEASUREMENT AND FLOW STUDY EQUIPMENT
HF 311 GROUND WATER FLOW APPARATUS HF 315 PERMEABILITY APPARATUS HF 401 BASIC HYDROLOGY APPARATUS
A tank with two inlet pipes and two outlet wells. Stainless steel tank with glass front, A stainless steel tank with tilting mechanism.
Manometers, sand and models. pressure tapping points and manometers, Side compartments, wells and sprinkler
over flow pipes, complete with pump, tank, nozzles. Complete with storage tank, pump,
dye injection, end baffles, sand and flow meter and calibrated weir and sand.
models.
TILTING FLOW CHANNEL
Several sizes of flow channels are available as per standard below other test section and length are available on requested. Accessories are
installed on the channel for study on various flow phenomena. The flow channel is supplied with necessary system e.g. water circulating, tilting,
flow measurement. Computer control is available as an option.
● SMALL SIZE
HF 505 TILTING FLOW CHANNEL
Bench top channel. Size: 5 cm wide x 15 cm high x 200 cm long
and -2 to +5% tilting. Adjustable bed is an optional.
● MEDIUM SIZE
10
FLOW MEASUREMENT AND FLOW STUDY EQUIPMENT
• LARGE SIZE
Hook and Point Gauge Current Meter Pitot Tube Bridge Pier
Dam Spillway Syphon Spillway Ogee Weir with Manometer Board Weirs
Culvert Fittings
Vibration Pile Sluice Gate Radial Gate Trapezoidal Flume Venturi Flume Parshall Flume
Submerged Orifice Lift and Drag Balance Roughened Beds Absorbing Beaches Wave Generator
and Models
11
PUMP TEST SETS
Several Pump Test Sets are available for fixed speed, multi speed and variable speed control. Measuring instruments may be analog or digital
and a computer interface is provided for either data display, analysis or computer control operation.
HP 111 CENTRIFUGAL PUMP HP 141 RECIPROCATING PUMP HP 301 SERIES AND PARALLEL
DEMONSTRATION UNIT, DEMONSTRATION UNIT, PUMPS DEMONSTRATION
Computer Interface Computer Interface UNIT, Computer Interface
12
PUMP TEST SETS
HP 305M COMPACT SERIES AND HP 305V COMPACT SERIES AND HP 405B COMPACT MULTI PUMP TEST SET,
PARALLEL PUMP TEST SET, PARALLEL PUMP TEST SET, Inverter Speed Control
Multi Speed Variable speed A bench top unit for centrifugal, turbine, reciprocating
and axial flow pumps, each with 0. 55 kW motor.
PUMP TEST SET WITH TRUE PUMP INPUT, Common control unit for inverter and selector switch,
storage tank and measuring instruments.
Motor Dynamometer (0.55 kW)
HP 113 COMPACT CENTRIFUGAL HP 303 COMPACT SERIES AND HP 405 MULTI PUMP TEST SET,
PUMP TEST SET, Motor PARALLEL PUMP TEST SET, Motor Dynamometer
Dynamometer Motor Dynamometer Similar to HP405B with motor dynamometer.
13
TURBINE TEST SETS
HT 203 COMPACT PELTON HT 403 COMPACT CROSS FLOW HT 603 COMPACT KAPLAN
TURBINE TEST SET TURBINE TEST SET TURBINE TEST SET
Maximum output: 450 W. Maximum output: 400 W. Maximum output: 400 W.
HT 701 MINI PELTON / FRANCIS HT 702 COMPACT PELTON / FRANCIS HT 703 MULTI TURBINE TEST SET
TURBINE TEST SET TURBINE TEST SET Stainless steel runner Pelton turbine, bronze runner
.
Pelton turbine with stainless steel runner, Pelton turbine with stainless steel runner, Francis turbine, stainless steel runner cross-flow
nozzle and metal housing with nozzle and casing with transparent turbine and stainless steel runner Kaplan turbine.
transparent window. Francis turbine with window. Francis turbine with bronze
Maximum output: 400-450 W.
Metal runner, adjustable guide vanes and runner, adjustable guide vanes and
casing with transparent window. casing with transparent window.
Maximum output: 25-40 W. Maximum output: 400 - 450 W.
HT 310 FRANCIS TURBINE TEST SET HT 210 PELTON TURBINE TEST SET
14
AIR FLOW AND AIR COMPRESSION
This equipment is designed to the study of air flow measurement performance of fan, blower and compressor as well as related flow
behavior.
DEMONSTRATION UNIT, Computer Interface
MP 110 CENTRIFUGAL FAN MP 111 MULTI STAGE CENTRIFUGAL AIR MP 121 AXIAL FLOW FAN DEMONSTRATION
DEMONSTRATION UNIT, COMPRESSOR DEMONSTRATION UNIT, Computer Interface
Computer Interface UNIT, Computer Interface A bench top unit with 24 W axial flow fan and
A bench top unit with centrifugal fan, A bench top unit with 1 kW two stage motor, inlet orifice, outlet damper, flow
0.75 kW motor, inlet orifice, outlet damper; compressor, inlet orifice, outlet damper, straighteners, sensors and software. To be used
sensors and software. To be used with sensors and software. To be used with with computer.
computer. computer.
MP 100 AIR FLOW BENCH MP 115 COMPACT CENTRIFUGAL FAN MP 119 CENTRIFUGAL BLOWER TEST SET
A centrifugal fan with 0.55 kW motor, inlet TEST SET A centrifugal blower and 2.2 kW motor with an
pipe, outlet pipe with damper, flow Bench top unit with centrifugal fan, 0.75 kW advanced inverter, outlet amper, flow straighteners,
straighteners, orifice plate, nozzle, inlet motor, advanced inverter, inlet orifice, outlet orifice plate, Venturi nozzle, inclined manometers
cone, travelling pitot, inclined and multi damper, inclined manometer, hand tachometer, and measuring instruments.
tube manometers and optional items. thermometer and barometer.
MP 124 AXIAL FLOW FAN TEST SET MP 125 COMPACT AXIAL FLOW FAN TEST SET
Axial flow fan with 2.2 kW motor and an advanced inverter, flow straightener, Bench top unit with 24 W axial flow fan and motor, inlet
guide vane, outlet damper, measuring instruments and other optional items. orifice, outlet damper, speed indicator, inclined manometer,
ammeter, voltmeter, thermometer and barometer.
WIND TUNNELS
MP 142 FLOW VISUALIZATION WIND TUNNEL MP 315D SUBSONIC WIND TUNNEL, Downstream Fan
This is a unit for visualization of air flow stream An axial flow with 0.75 kW variable speed motor, 150 mm x 150 mm test section,
lines around models. It consists of a stilling maximum air speed over 30 m/sec, two component balance, various accessories
entrance, a viewing window, models, a smoke and models. Optional: Computer interface and computer control.
generator and distributor and a small blower.
15
AIR FLOW AND AIR COMPRESSION
MP 330D SUBSONIC WIND TUNNEL, Downstream Fan MP 330U SUBSONIC WIND TUNNEL, Upstream Fan
An axial flow fan with 2.2 kW variable speed motor, Similar to MP 330D but with upstream fan.
300 mm x 300 mm test section, maximum air speed over Optional: Computer interface and computer control.
30 m/sec, two components balance, various accessories and
models. Optional: Computer interface and computer control. MP 330UH SUBSONIC WIND TUNNEL, Upstream Fan
Similar to MP 330U but with 7.5 kW fan and maximum air speed
over 60 m/sec. Optional: Computer interface and computer control.
AIR COMPRESSION
A single stage and two stage air compressor with and advanced inverter, air box with inlet orifice and inclined manometer, air receiver and
measuring instruments.
MP 201 SINGLE STAGE AIR MP 202 TWO STAGE AIR MP 203 TWO STAGE AIR COMPRESSOR
COMPRESSOR TEST SET, COMPRESSOR TEST SET, TEST SET,
Air Cooled Air Cooled Air-Water Cooled
1.5 kW motor 2.2 kW motor 2.2 kW motor, different speeds for the two
stages, water cooled intercooler.
RENEWABLE ENERGY
16
THERMODYNAMICS
The equipment in this group includes internal combustion engines, heat exchangers, refrigeration and air conditioning, boilers and steam power
plants and others.
Type of Dynamometer
MT 503G SINGLE CYLINDER ENGINE MT 511 MOTOR CYCLE DYNAMOMETER MT 520 EXHAUST GAS COLORIMETER
TEST BED, Electric Generator This is a chassis type dynamometer for Stainless steel finned tubes and casing
Absorber measurement of dynamometer speed, torque, with gas to water heat exchanger for use
Optional: Computer interface. output power and vehicle speed of a motor on multi cylinder engine.
cycle. Capacity: upto 150 kW.
Optional: - Eddy current absorber
- Computer interface.
17
THERMODYNAMICS
GAS TURBINES
MT 551 TURBO JET ENGINE, 70N Thrust MT 560 TWO SHAFT GAS TURBINE
A radial flow compressor and an axial flow turbine as in modern air A radial flow compressor and axial flow turbine and the other
planes with motor start. Complete with sensors, signal converter and is axial flow power turbine as in modern power plants.
software for data display, analysis and control by computer. Indirect coupling dynamometer. Sensors, signal converter
MT 553 TURBO JET ENGINE, 200N Thrust. with software for data display, analysis and control by
computer.
HEAT EXCHANGERS
TH 241 MULTI HEAT EXCHANGER, Transparent Casing TH 240 MULTI HEAT EXCHANGER
The unit has three heat exchangers-concentric tube, shell and Similar to TH241 with larger heat transfer area and opaque
tube and plate. The concentric tube and shell and tube are casing of concentric /shell and tube.
transparent casing. Accessories include pump water tank, heater Optional: Jacketed vessel with coil and stirrer.
and measuring instruments. Selection of the heat exchanger is Computer interface or computer control.
by selection valves. Changing the flow direction is by switching
the hoses. TH 201 CONCENTRIC TUBE HEAT EXCHANGER
Optional: Jacketed vessel with coil and stirrer.
Computer interface or computer control. TH 203 CONCENTRIC TUBE HEAT EXCHANGER,
Different Tube Metals
TH 202 CONCENTRIC TUBE HEAT EXCHANGER,
TH 211 SHELL AND TUBE HEAT EXCHANGER
Transparent Casing
. TH 221 PLATE HEAT EXCHANGER
TH 212 SHELL AND TUBE HEAT EXCHANGER,
Transparent Casing TH 231 JACKETED VESSEL WITH COIL AND STIRRER
18
THERMODYNAMICS
HEAT TRANSFER
TH 251 DEMONSTRATION COOLING TOWER TH 260 BOILING HEAT TRANSFER UNIT TH 312 THERMAL CONDUCTIVITY OF
Transparent packed column completes with A low boiling point liquid is boiled by a NON METALLIC MATERIALS,
blower, circulating pump, stainless steel tanks, heater in a glass cylinder. The vapor is Guarded hot plate method
heater and measuring instruments condensed by a water-cooled condenser Specimen is clamped between a hot plate with
Optional: - Other packed columns and measuring instruments. heater and a cold plate with cooling water and
- Computer interface measuring instruments.
19
THERMODYNAMICS
TH 510 SPLIT TYPE AIR CONDITIONER TH 512 CAR AIR CONDITIONING SYSTEM TH 525 AIR-TO-WATER HEAT PUMP
SYSTEM 3.7 kW motor with compressor, radiator, A bench top unit with compressor, a water
2.5 kW unit, with wall type fan coil, R22 automotive air condition fan, R 134a cooled condenser, the evaporator absorbs
refrigerant and measuring instruments. refrigerant and measuring instruments. heat from environmental air and measuring
instruments.
TH 511 SPLIT TYPE AIR CONDITIONER SYSTEM, Inverter Control
TH 516 LABORATORY AIR CONDITIONING SYSTEM TH 518 RECIRCULATION AIR CONDITIONING UNIT,
The system has a transparent window. A humidifier, a preheater, With Climatic Chamber
and a reheater are provided in addition to the normal fan, The system has a transparent window. A humidifier and a preheater are
compressor and cooling unit. provided in addition to the normal fan, compressor and cooling unit. A
humidifier and a reheater are provided in the climatic chamber.
TH 527 REFRIGERATION TRAINER TH 522 ICE MAKER TEST RIG TH 520 BASIC REFRIGERATION SYSTEM
A bench top unit with compressor, a water cooled A bench top unit with compressor, an ice 70 W compressor, with transparent window
condenser, water cooled evaporator and maker evaporator, air cooled condenser freezer, air cooled condenser, sight glasses
measuring instruments. and measuring instruments. and measuring instruments.
20
THERMODYNAMICS
TH 120 MINI STEAM POWER PLANT TH 130 MINI STEAM TURBINE POWER PLANT
An educational miniature power plant consisting of feed water tank A miniature modern power plant for education consisting of feed
with hand feed pump, gas fired boiler, steam engine, condenser, water tank with hand feed pump, gas fired boiler, steam turbine,
generator and loads, prony brake and measuring instruments. condenser, generator and loads, prony brake and measuring
Maximum power: over 5 W instruments. Maximum power: over 9 W.
Optional: Super heater, Computer interface, Automatic feed pump
TH 136 COMPACT STEAM TURBINE POWER PLANT, 1.0 kW Optional: - Electric boiler instead of diesel boiler.
Similar to TH 137 with 200 kg/h boiler. - Super heater, Electric
- Water brake absorber dynamometer
TH 135 COMPACT STEAM TURBINEPOWER PLANT, 0.5 kW - Computer interface or Computer control
Similar to TH 137 with 100 kg/h boiler.
21
CHEMICAL ENGINEERING AND FOOD TECHNOLOGY
HF 112 LIQUID SEDIMENTATION HM 130 GAS ABSORPTION COLUMN HM 210 BATCH DISTILLATION UNIT
APPARATUS Packed column with raschig rings 1.4 m Plate column with view port and packed column
For study, the settling characteristics and high, feed tank, pump, air blower, with reboiler, condenser, condensate vessel,
particle sizes of suspended solid. manometers, rotameters, carbon dioxide reflux valve and sampling points, manometer,
bottle and a gas analyser. rotameter and temperature digital display.
BP 213 KINETIC REACTORS IN SERIES BP 120 FIXED & FLUIDIZED BED HM 120 FLUIDIZATION AND HEAT TRANSFER
The unit is designed for a study of multistage APPARATUS The equipment is for a study of fluidized bed
mixing process. The equipment comprises Two beds, one for air and the other for behavior and heat transfer coefficient.
two reagent tanks with pumps and water, for a study of fluid bubbling The equipment includes a glass cylinder, a
rotameters, three reactor tanks with variable phenomena. Air compressor, water pump,
heater with temperature probes and digital
speed agitators and conductivity probes. rotameters, manometers and bed material
are provided. display, air rotameters, manometers, volt
meter, ammeter and bed material.
22
STRENGTH AND PROPERTIES OF MATERIALS
Equipments in this group measure behavior of materials under various types of load i.e. tension, compression, bending, torsion, cyclic load, impact etc.
23
MACHINE ELEMENTS AND THEORY OF MACHINES
This group of equipment includes simple equipments for force study, mechanism for a study of machine motion and equipment for more
advanced force and motion study.
24
MACHINE ELEMENTS AND THEORY OF MACHINES
MM 340 STATIC AND DYNAMIC MM 343 STATIC AND DYNAMIC
BALANCING MACHINE BALANCING APPARATUS
A motor with speed controller for two-plane Four balance masses. Static balancing by
balancing. The machine is equipped with applying known weight steel balls. Dynamic
standard rotors, balancing weights, vibration balancing when shaft assembly is driven by
pickups, signal amplifier and converter and a motor.
software for data analysis on computer. Optional: Inverter for speed control.
25
MACHINE ELEMENTS AND THEORY OF MACHINES
MM 500-132 TENSILE TEST SET MM 500-133 TORSION SET
The set consists of a tensile test frame, The set consists of rods and tubes of
specimens of different material, a dial indicator, different materials, fixed and rotating chucks
and vernier caliper. with pulley, dial indicator, vernier caliper,
The experiments include tensile test to steel rule, weight hanger and weights.
destruction of different material for observation The experiments include relation of angle of
of elastic and plastic regions, modulus of twist, specimen length moment of inertia
elasticity and ultimate strength. and material.
26
STRUCTURES AND ACCESSORIES
This group of equipments requires a main frame where test accessories are attached for experiments. Supporting accessories are used for
installation and/or measurement. Learning software is available for most experiments.
MAIN FRAME
ST 311 BENDING MOMENT ST 312 SHEAR FORCE ST 3112 SHEAR FORCE AND BENDING
For measurement of bending moment at a For measurement of shear force at a MOMENT
section in a beam section in a beam For measurement of both shear force and
bending moment in the same beam.
ST 311C BENDING MOMENT, ST 312C SHEAR FORCE, ST 3112C SHEAR FORCE AND BENDING
Computer Assist Computer Assist MOMENT, Computer Assist
ST 316 UNSYMMETRICAL CANTILEVER ST 321 CONTINUOUS BEAM ST 322 AREA MOMENT METHOD
For studying a cantilever deflection and For measurement of reactions for a two- span For verification of the deflections and slopes
determining shear center continuous beam with and without settlement of a beam by area-moment method.
of a support
ST 316C UNSYMMETRICAL CANTILEVER, ST 321C CONTINUOUS BEAM, ST 322C AREA MOMENT METHOD,
Computer Assist Computer Assist Computer Assist
27
STRUCTURES AND ACCESSORIES
ST 323 DEFLECTION OF BEAMS AND ST 326 VIRTUAL WORK ST 331 TWO HINGED PARABOLIC ARCH
CANTILEVERS For studying the principle of virtual work For direct measurement of the horizontal
For measurement of deflections and slopes to the derivation of redundant reactions. component of the abutment thrust of a two-
of a beam under bending. hinged parabolic arch by using a simple model.
ST 323C DEFLECTION OF BEAM AND ST 326C VIRTUAL WORK, ST 331C TWO HINGED PARABOLIC ARCH,
CANTILEVERS, Computer Assist Computer Assist Computer Assist
ST 332 TWO HINGED PARABOLIC ARCH, ST 333 THREE HINGED ARCH ST 340 STRAIN AND STRESS OF MATERIAL
Fixed Ends For measurement of horizontal abutment thrust For demonstration of strain and stress of
For measurement of horizontal thrust and for symmetrical and unsymmetrical three hinged material using strain gauges.
end fixing moments of the abutment. arch using a combination of concentrated and
distributed loading.
ST 332C TWO HINGED PARABOLIC ST 333C THREE HINGED ARCH, ST 340C STRAIN AND STRESS OF MATERIAL,
ARCH, Fixed Ends, Computer Assist Computer Assist
Computer Assist
ST 341 REDUNDANT TRUSS ST 342 FORCES IN TRUSS ST 351 SIMPLE SUSPENSION BRIDGE
For measurement of deflection and axial For measurement of deflection and axial forces For measurement of cable tension resulting from
forces in pin-joint trust members when a in pin joint trust members. uniformly distributed and point loads on the rigid
redundant member is added.
deck.
ST 341C REDUNDANT TRUSS, ST 342C FORCES IN TRUSS, ST 351C SIMPLE SUSPENSION BRIDGE,
Computer Assist Computer Assist Computer Assist
28
STRUCTURES AND ACCESSORIES
ST 352 SUSPENSION BRIDGE ST 360 DEFLECTION AND REACTIONS ST 361 BENDING MOMENT IN A FRAME
For studying the inter-action between suspension OF FRAMES For measurement of strain hence bending
cables and load measuring supports with uniformly For comparison of experimental and member along the vertical and horizontal
distributed and point load on the rigid deck. theoretical deflections of a rectangular members of the frame.
portal, an open square and “S” frame.
ST 352C SUSPENSION BRIDGE, ST 360C DEFLECTION AND REACTIONS ST 361C BENDING MOMENT IN A FRAME,
Computer Assist OF FRAMES, Computer Assist Computer Assist
ST 365 DEFLECTION OF CURVED BARS ST 375 TORSION OF RODS AND TUBES ST 376 TORSION AND BENDING
For measurement of horizontal and vertical For the investigation of torsion and torsional The apparatus is used for torsion and
components of curved bar deflections. rigidity in rods, tube and split tube. bending tests on different materials.
ST 365C DEFLECTION OF CURVED BARS, ST 375C TORSION OF RODS AND TUBES, ST 376C TORSION AND BENDING,
Computer Assist Computer Assist Computer Assist
29
STRUCTURES AND ACCESSORIES
ST 313 INFLUENCE LINE APPARATUS ST 315 SHEAR CENTER ST 317 EQUILIBRIUM OF FORCES
For investigation of reactions under For determination of the plane of For studying the equilibrium of
various conditions of load at all supports traverse loading without twisting for concurrent and non-concurrent forces
along a three span bridge. selected standard sections in a single plane
30
SOFTWARE AND MANUAL
ESSOM software is LabviewTM based and is available for most equipments. It is classified as Learning Software for equipment without live
signals and operating software for equipment and live signals
LEARNING SOFTWARE
The software provides information on equipment description, relevant theory, experiment procedures, typical data, to give required
calculations upon entering input data manually and to give hard copy printout.
OPERATING SOFTWARE
There are two levels of the software i.e. Computer Interface and Computer Control.
For Computer Interface, sensors analog outputs are converted to digital by an interface module. The software is programmed for the
relevant digital signals to be displayed and analyzed by computer.
For Computer Control, an interface module, software program and motor are used in place of relevant manual adjustment. The software
data are displayed, analyzed and controlled by computer.
There are cases where only some relevant live signals are available and some data are entered manually. This is sometimes called
Computer Assist.
MANUAL All ESSOM equipment are supplied with Operating Manual. Typical manual contents are:
Part 1: Receipt of goods, Installation and commissioning Part 3: Operation and Experiment Procedure
o Care and safety guidelines o Typical Data: Data sheet and Sample data
optional equipment both required and accessory o Appendix: Relevant technical data, key
We Supply Worldwide
31
32