Professional Documents
Culture Documents
Customer Friendly Release Notes JBL Bar 9.1 Surround and Upgrade Process Global Version 21-23-11 80
Customer Friendly Release Notes JBL Bar 9.1 Surround and Upgrade Process Global Version 21-23-11 80
Customer Friendly Release Notes JBL Bar 9.1 Surround and Upgrade Process Global Version 21-23-11 80
What’s New:
source/mode
Note: This software upgrade is not applicable for JBL Bar 9.1 China version.
---THE END---
Page 1 of 2
How to manually upgrade my soundbar
You can download the latest software version by clicking here and bin file exist after
unzipped:
• JBL_BAR_9_1.bin
1. Prepare one empty USB thumb drive and create new folder (named “UPG”) in
root directory, then copy the bin file to the new UPG folder.
2. Please mount the two detachable speakers onto the main soundbar.
3. Please insert the USB thumb drive to the Soundbar USB port on its rear panel and
long press Soundbar buttons: [POWER] and [VOL- ] for 10 seconds to start
software upgrade.
5. Wait for the software upgrading to complete. The unit will reboot and go back to
standby.
6. After successful upgrading, you can now check the software version (refer to
steps in “Q1”), the soundbar should be upgraded to version “ver. 21.23.11.80”.
Note:
• If your soundbar is connected to the internet, its software will be automatically
upgraded overnight when it is not in used.
• This software upgrade is not applicable for JBL Bar 9.1 China version.
注意:此软件升级不适用于 JBL Bar 9.1 中国版。
Page 2 of 2