Professional Documents
Culture Documents
PM-MEC-WI-26 Reverse Bend Test
PM-MEC-WI-26 Reverse Bend Test
PM-MEC-WI-26 Reverse Bend Test
No : PM/MEC/WI/026
Rev : 01
WORK INSTRUCTION: REVERSE BEND
TEST
PETROMASTER
QA / QC Dept.
CONTROLLED
COPY No:_______________
Page 1 of 4
This document is the property of PETROMASTER and must not be copied, loaned or information it contains be disclosed to a third
party without the written consent of PETROMASTER.
PETROMASTER
No : PM/MEC/WI/026
Rev : 01
WORK INSTRUCTION: REVERSE BEND
TEST
Approval History
0 Sep 01, 2016 First Issue Lab Engineer Team Lead Division Manager
01 Jan 01. 2018 Second Issue Lab Engineer Team Lead Division Manager
PETROMASTER
QA / QC Dept.
Page 2 of 4
This document is the property of PETROMASTER and must not be copied, loaned or information it contains be disclosed to a third
party without the written consent of PETROMASTER.
PETROMASTER
No : PM/MEC/WI/026
Rev : 01
WORK INSTRUCTION: REVERSE BEND
TEST
CONTROLLED
COPY No:_______________
Contents
Page 3 of 4
This document is the property of PETROMASTER and must not be copied, loaned or information it contains be disclosed to a third
party without the written consent of PETROMASTER.
PETROMASTER
No : PM/MEC/WI/026
Rev : 01
WORK INSTRUCTION: REVERSE BEND
TEST
ASTM A 370-17a.
2.0 SCOPE:
This test is conducted to determine the ability of metallic wire of 0.30mm to
10.00mm diameter/thickness to undergo plastic deformation during reverse
bending.
3.0 Procedure:
------------------------------------End---------------------------------------
Page 4 of 4
This document is the property of PETROMASTER and must not be copied, loaned or information it contains be disclosed to a third
party without the written consent of PETROMASTER.