Professional Documents
Culture Documents
Value Types - Tekla User Assistance
Value Types - Tekla User Assistance
1 TABLE OF CONTENTS
This page was written for a different software version than you have currently
selected.
Use the search to find similar content in your selected version.
Last updated October 20, 2017 by Tekla User Assistance | Software version: 19.1
Value types
The value type determines what kind of value you can enter for the variable. Tekla
Structures has the following value types for variables:
Option Description
Length A decimal (floating point) number. Use for lengths and distances.
Length numbers have unit (mm, inch, etc.) and are rounded to
two decimal places.
Factor A decimal value without a unit. You can set the number of
decimals for the value type in Tools > Options > Options... >
Units and decimals.
Angle A decimal number type for storing angles, stored to one decimal
place, in radians.
Material A data type associated with the material catalog. Use to select
material from the standard material dialog.
Profile A data type associated with the profile catalog. Use to select
profile from the standard profile dialog.
Option Description
Bolt size Data types linked to the bolt catalog. Bolt size works with Bolt
Bolt standard standard. They have fixed naming: Px_diameter and
Px_screwdin. Do not change the fixed name.
To show values for these in the component’s dialog box, x must
be the same for both, for example, P1_diameter and
P1_screwdin.
Bolt type For determining the bolt type (site/workshop) in the custom
component dialog box. Linked to the Bolt type property of bolts
in Custom component browser.
Stud size Data types linked to the bolt catalog. Stud size works with Stud
Stud standard standard. They have fixed naming: Px_size and Px_standard.
Do not change the fixed name.
To show values for these in the component’s dialog box, x must
be the same for both, for example, P9_size and P9_standard.
Distance list Use with options with several length values, such as bolt
spacings.
Use space as a separator between the distances.
Option Description
Welding site A data type for determining the welding place: workshop or
building site.
Rebar grade Data types linked to reinforcement catalog. Rebar grade, Rebar
Rebar size size, and Rebar bending radius work together. They have fixed
Rebar bending naming format: Px_grade, Px_size, and Px_radius where the
radius x is a number. Do not change the fixed name.
To show values for these in the component's dialog box, x must
be the same for all, for example, P1_grade, P1_size, and
P1_radius.
See also
Variables properties
Variables in custom components
THIS SECTION
VARIABLES PROPERTIES
▼
Value types
RELATED HELP TOPICS
Variables properties