Professional Documents
Culture Documents
Pibros
Pibros
Parts List
Number
Quantity Description
(on drawing above)
1 1 Outer skin bottom
2, 3 2 Outer skin top (left and right)
4, 5 2 Outer shape formers (sandwich)
6,7 2 Inner shape formers (sandwich)
8 1 or 2 Fin - make 1 or 2 as you like
9 4 Elevons make 4 and glue together in pairs
Note: The fin and elevon sizes are guides only - make the fin/s as small as you dare and the elevons as big as you dare!
Construction
Note: Read all steps below before starting construction as radio and motor installation is not covered as each installation differs. I try to mount the RX inside the foam,
covered by a hatch.
Dimension -25% Normal +25% +33% +35% +40% +50% +60% +75% +100%
A 233 310 388 412 419 434 465 496 542.5 620
B 17 23 29 31 31 32 35 37 40.25 46
C 300 400 500 532 540 560 600 640 700 800
E 300 400 500 532 540 560 600 640 700 800
F 600 800 1000 1064 1080 1120 1200 1280 1400 1600
G 113 150 188 200 203 210 225 240 262.5 300
H 225 300 375 399 405 420 450 480 525 600
I 150 200 250 266 270 280 300 320 350 400
J 188 250 313 333 338 350 375 400 437.5 500
K 375 500 625 665 675 700 750 800 875 1000
Span 600 800 1000 1064 1080 1120 1200 1280 1400 1600
Length 300 400 500 532 540 560 600 640 700 800
Length (including elevons) 345 460 575 612 621 644 690 736 805 920
Thickness 14 18 23 24 24 25 27 29 31.5 36
Sheets (3mm) 5 6 8 8 8 8 9 10 10.5 12
COG (from nose) 158 210 263 279 284 294 315 336 367 420