Professional Documents
Culture Documents
LiftMedia Reconfiguration.V110.en
LiftMedia Reconfiguration.V110.en
LiftMedia Reconfiguration.V110.en
10
LIFTMEDIA
TFD LCD DISPLAY, MUSIC AND ANNOUNCEMENT SYSTEM
FOR LIFTS
RECONFIGURATION
Liftmedia Reconfiguration V1.10
This document has been created to be a guide for Arkel customers. Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form without the prior written permission of Arkel is prohibited. Arkel reserves the right
to make changes and improvements to any of the products described in this document without prior notice.
Arkel is not responsible for those mistakes that may be found in this manual and for the damages that they may cause.
Liftmedia Reconfiguration V1.10
CONTENTS
1. OVERVIEW ........................................................................................................................................................................ 4
2. RECONFIGURING LIFT MEDIA DESIGN ................................................................................................................... 4
2.1. LANGUAGE SETTİNGS .................................................................................................................................................... 4
2.2. CHOSİNG CONTROLLER ................................................................................................................................................. 4
2.3. V-H ORİENTATİON SELECTİON ....................................................................................................................................... 5
2.4. FLOOR TEXT SETTİNGS .................................................................................................................................................. 6
Liftmedia Reconfiguration V1.10
1. Overview
This document contains instructions for reconfiguring the LiftMedia with default images and announcement files. To reconfigure
the Lift Media SD card, the SD card must be programmed once and contain all the necessary folders.
Image-1
2.1. Language Settings
When you run the config file, you will find the language setting menu (Image-2). You can choose a language to use for Lift
Media-S.
Image-2
You can press “1” for Turkish, “2” for English, then press enter.
Image-3
You can press to “1” for ARCODE, “2” for ARL500, “3” for OTHER. If you choose “OTHER”, you will able to find GRAY or
BINARY options.
NOTE: The “OTHER” option can not be used with Lift Media-S. It can be only used with Lift Media-P.
Image-4
Note: If "Leave existing design intact" is selected, the design on the SD card is used. No changes are made.
After choosing horizontal or vertical default design, the menu will appear which you can arrange the indicator settings which is
already installed (image-5).
Liftmedia Reconfiguration V1.10
Image-5
Image-6
Press “Y” for “Do you want to change floor texts”, then press enter; you will now decide how many floors there are under-
ground (Image-7).
Image-7
Liftmedia Reconfiguration V1.10
You can set up to 3 stops for "How many floors are there under-ground". After entering stops, press enter.
Image-8
You can now decide that “first letter of under-ground level” (Image-8). Press “1” for B, “2” for P, “3” for “-“, then press enter.
Image-9
You can press “0” or “1” for ground floor number (Image-9), then press enter. After this step, all files installed automatically.
You can take off SD card from computer and plug it to Lift Media-S.