Professional Documents
Culture Documents
1.product Introduction: Special Function
1.product Introduction: Special Function
1.Product Introduction
1
IMS-C91
2.Security Information
Diagnosis
Warning: When switch ignition on, do not touch or pull out sensors
or wire harness.
2
IMS-C91
Warning:
1. To ensure the safety during the operation, please operate according
to instructions.
2. Do not open the VCI cover or its after-sales service will be invalid. If
there is any failure or damage, please contact the manufacturer for
maintenance.
3. Please use the original parts.
4. After testing the vehicle, do not forget to remove the VCI from
diagnostic interface. If it remains in the interface, it will cause battery
power loss
3
IMS-C91
3.Components
3.2 Interface
4
IMS-C91
4.Diagnostic Program
Installation :
5
IMS-C91
6
IMS-C91
Note:
First registration must be conducted in the condition that the
phone is connected to the Internet.
Fill in the correct mailbox.
Input the verification code recieved ,click “ next”.
7
IMS-C91
8
IMS-C91
Note:
SN number is a VCI serial number. It can be found on VCI or on
the first page of instructions.
Check code is at bar code on the first page of instructions or on
the packing box.
If check code is lost due to disconnection with Internet, please
send a message “jym” to 75585537300.There will be no message
sent back if user sends the wrong message or his phone number
has not been registered yet.
9
IMS-C91
10
IMS-C91
11
IMS-C91
12
IMS-C91
13
IMS-C91
If the program updates, there will be a tip on home page. Enter the
upgrading management menu
14
IMS-C91
Note:If user forgets personal account and password, please contact our
company to retrieve them.
Get verification code through the registerd phone , and click “next”
15
IMS-C91
6.About toolbar:
16
IMS-C91
17
IMS-C91
6.2 Settings:
18
IMS-C91
19
IMS-C91
20
IMS-C91
1. Only when users who have registered post or fax the After-sales
Service Receipt to our company can they have access to our warranty service.
Those who do not register are regarded as giving up warranty service.
3. Warranty period starts from the date when user buys our product. That
is the date on invoice, receipt or on maintenance certificate.
5. When warranty terms offered by the dealer differ from ours, our
warranty terms shall prevail.
21
IMS-C91
→ No warranty certificate
22
IMS-C91
23