Professional Documents
Culture Documents
PVC Pipe Project
PVC Pipe Project
SUBMITTED BY:
DECLARATION
Place: Bhubaneswar
INTRODUCTION......................... 1
Research methodology………… 21
Conclusion………………………. 32
Findings…………………………. 33
Suggestion………………………. 34
Questionnaire…………………… 35-36
Bibliography……………………. 37
ABSTRACT
Page no.-1
INTRODUCTION
The Plastics Industry in India has made significant achievements ever
since it made a modest but promising beginning by commencing
production of Polystyrene in 1957. The Indian plastics industry faced
intense competition from companies that were globally consolidated.
Indian plastic industry needed technological advancements to
compete the existing players in terms of product quality, cost and
quantity. The economic reforms launched in India since 1991, have
added further fillip to the Indian plastic industry. Joint ventures,
foreign investments, easier access to technology from developed
countries etc have opened up new vistas to further facilitate the
growth of this industry.SHREE PLASTICS PRIVATE
LTD.,BERHAMPUR has set up Industrial Estate at Orissa in 2000
which occupies 7861 sq.ft of land having approximately. SHREE
PLASTICS PRIVATE LTD. is mainly known as pipes Industry.
The overall employment generated by SHREE PLASTICS
PRIVATE LTD. is more than 300 in numbers. Further Total
investment in SHREE PLASTICS PRIVATE LTD. is app.Rs. 8.90
Crores. SHREE PLASTICS PRIVATE LTD.mainly includes
Polypropylene mats & Polyvinyl Chloride Pipe production units.
SHREE PLASTICS PRIVATE LTD. captured a huge market share
in Orissa. Pipes from SHREE PLASTICS PRIVATE LTD. are also
distributed and used all over Orissa.
The term “plastics” usually refers to a large and varied
group of synthetic material which is solid in finished but at same
stage in their processing are fluid enough to be shaped by application
of heat and pressure.
An attempt is made here to list down most widely used
plastics, covering in general the chemistry, molecular, structure,
structure property relationship ,forms available, nature of material,
plasticization, material behavior during molding and in detail property
and application of individual plastics material.
Page no.-2
HISTORY OF COMPANY
Total area of our plant is 45000 Sq.ft and out of this area 12000sq.ft
has been utilized/dedicated for the respective commission of plant &
Machinery and Research & Development. The principal advantage of
the production process is that the entire production and R&D work is
going on under single roof. In brief, it may be highlighted that starting
from staking raw materials to dispatches of finished products to the
various destination of the state of Orissa and neighboring state are
going on under one roof which makes the product 0% free from error
and due to concrete and strong process in R&D, the company is able
to provide mirror finished product to its Customer as the product
differentiates its identification amongst the availability of competitors
brand.
Page no.-3
Clientele
Various government departments of Orissa state are also our valued
customers, viz., Rural Water Supply & Sanitation (RWSS)
Organization; Public Health Department (PHD); Orissa Lift Irrigation
Corporation Limited (OLIC); Orissa Agro Industries Corporation
Limited (OAIC); and Municipalities/NACs, Defence Projects, etc.
PROPERTIES OF PLASTICS
In general the plastics process the following properties:
1. Physical properties
Dimension
Density
Water absorption
2. Mechanical properties
Tensile strength
Elongation
Flexural strength
Shear strength
Hardness
Creep strength
Abrasion
Page no.-4
CLASSIFICATION OF PLASTICS
Plastics are commonly classified into two categories, they are
1. Thermo plastics
2. Thermosetting plastics
Thermo plastics :
These polymers during muddling gehardened once they are solid field
they cannot be softened. They cannot be resoftened once they are set.
These polymers have 3 dimensional structures & have molecular
weight. These are hard, tough, and brittle. Those plastics which are
shaped by the application of heat pressure and donot have versatile of
repeat process ability and termed as THERMOSET.
Page no.-5
Example:
Phenol formaldehyde polymer
Melamine formaldehyde polymer
CONCEPT
The company shree plastics pvt ltd. in Sriplast has its bright past &
future to expand its territory as well as to increase its selling through
out the whole india. Its marketing strategy is very vital and important
as compare to it’s brand value. The company always takes some
advanced and smooth descision to increase its selling capacity
through “marketing strategy of PVC pipes”. That why they choose
some famous people to endorse their product named as the brand
ambassador of the company.They also invest a huge amount of capital
in different areas to improve the selling. They also conduct some
social activities in order to make popular their product among the
common people. I also think this marketing strategy helps them a lot
till now. This strategy of this company is very popular & worth
taking. so ,I consider as my topic.
Page no.-7
Characteristics:
Properties:
Grades:
Unmodified grade
Molding grade
Extrusion grade
Impact modified grade
Plasticized grade
Flame retardant grade
SOCKETED PIPES
THREADED PIPES
SLOTTED PIPES
RIBBED PIPES
PVC FLEXIBLE HOSES
Page no.-10
Processing methods:
Injection molding
Extrusion molding
Calendaring process
Stretch blow molding
Rotational molding
EXTRUSION PROCESS:
It is a continuous process.
In principle, the plastic raw material is plasticated by means of a
screw plastication unit and the molten material is continuously
pumped out through a standard orifice (die) in order to take the
shape and then the shape is set by cooling/sizing system.
Example: film, pipe, tube, profile, monofilament, box strapping
etc.
Page no.-11
BRIEF STUDY
As per the market requirement they are not the single brand in the
market who produce such kind of product. So, they adopt some secret
and advanced strategy which makes them so innovative. They invest
very huge amount in advertising in order to endorse their product it
may be through static, electronic media,plamplet. They open some
exclusive outlet of their respective product in order to make them
popular among all.they has huge tie ups with some large brands which
works for them so effectively.
PVC pipes
Plastics pipes.
Page no.-19
MILESTONE
As it is one of the most popular company it receives many prestigious
awards in national level .
Awards
RESEARCH METHODOLOGY
HYPOTHESIS:-
Hypotheses of the proposed research work are as under:-
DATA COLLECTION:-
In this project I have collected both primary and secondary
data. I took a sample size of 100 and I collected the opinion
of the samples by giving them questionnaire forms and came
to conclusion.
Secondary data was collected from company manuals &
records.
Page no.-22
50
45
40
35
30
25
20
15
10
5
0
a b c
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 30% says yes(a),45% says No(b) & rest of 25% can’t
give their view.
Page no.-23
2. Are you satisfied with the supply facility of Plastics with regard to
final delivery ?
Yes(a) = 40%
No(b)=20%
Can’t Say(c)=40%
c a
40% 40%
b
20%
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 40% says yes(a),20% says No(b) & rest of 40% can’t
give their view.
Page no.-24
45
40
35
30
25
20
15
10
5
0
a b c
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 20% says yes(a),40% says No(b) & rest of 40% can’t
give their view(c).
Page no.-25
60
50
40
30
20
10
0
a b c d
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 50% says strongly satisfied (a),20% satisfied (b), 10%
not satisfied(c) 10% can’t give their view(d).
Page no.-26
45
40
35
30
25
20
15
10
0
a b c
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 32% says yes(a), 28% says No(b) & rest of 40% can’t
give their view(c).
Page no.-27
c
30%
a
40%
b
30%
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 40% says yes(a),30% says No(b) & rest of 30% can’t
give their view(c).
Page no.-28
60
50
40
30
20
10
0
a b c
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 50% says yes(a),30% says No(b) & rest of 20% don’t
give their view(c).
Page no.-29
80
70
60
50
40
30
20
10
0
a b c d
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 10% says Packaging (a),10% Price (b), 70% Quality (c)
10% Advertising (d).
Page no.-30
60
50
40
30
20
10
0
a b c d
Interference:-
In the Above figure shows that researcher having surveyed that out of
100 member 60% says Direct sale at factory Gate (a),20% Indirect
sale through channels (b), 10% Direct sale through sales executives
(c) 10% Online and Telemarketing (d).
Page no.-31
50
45
40
35
30
25
20
15
10
5
0
a b c d e
Interference:-
In the Above figure shows that researcher having surveyed that
out of 100 member 50% says Through word of mouth (a),10%
Through print media (b), 20% Through internet (email) (c), 10%
Through electronic media (d),10% Bill boards(e).
Page no.-32
CONCLUSION
The Small scale Plastic Processing Units in shree plastics pvt. Ltd.
has been moving through critical state. Instead of “survival to the
fittest” maximum entrepreneurs believes in “Cheapest is the best”
which badly affects on their business operation and promotion
activities. The successful and efficient implementation of marketing
management strategies is the optimum solution for overcoming the
problem of survival and existence. However, even though the small
scale plastics processing units are affected and effected by
globalization, still they proves their flexibility to operate the business
in adverse scenario and work together and identifies themselves as a
market leader in pipes in Sriplast.
Page no.-33
FINDINGS:-
Its positive aspect
No variety in product
Selected customer
Page no.-34
SUGGESTIONS
Though it is a huge manufacturing company and capture a huge
market shares,still it has some drawback..,
Drawback
No variety in product
Selected customer
Suggestion
Questionnaire
1. Do you have separate marketing department?
Yes(a)= 30%
No(b) = 45%
Can’t Say(c)=25%
BIBLIOGRAPHY
Magazine
Business today
India today
Websites
www.sriplast.com
www.google.com