Professional Documents
Culture Documents
PC228US PC228USLC: 48,280 - 49,670 LB 50,330 - 51,540 LB
PC228US PC228USLC: 48,280 - 49,670 LB 50,330 - 51,540 LB
PC228US-8
PC228USLC-8
PC
228US
HYDRAULIC EXCAVATOR
www.Komatsu.com Printed in Japan 201309 IP.As
Productivity Features
● Fuel-saving Technology
PC228US-8 introduces new engine and hydraulic pump
control technology.
Photo may include optional equipment.
High Stability
Hydraulic control valve
Komatsu develops and produces all major Flow divide/merge control The PC228US-8 offers exceptional lifting capacity and high
with EPC Idling Caution
components in house such as engines, stability with a large cast-iron counterweight.
To prevent unnecessary
electronics and hydraulic components.
fuel consumption, an idling
Combining “Komatsu Technology”, and Electronic control Working Modes Selectable
unit for engine Main pump caution is displayed on the
customer feedback, Komatsu is achieving Two pump independent The PC228US-8 excavator is equipped with five working
control monitor, if the engine idles
great advancements in technology. modes (P, E, L, B and ATT mode). Each mode is designed to
Engine for 5 minutes or more.
To achieve both high levels of productivity Heavy duty HPCR (High Pressure match engine speed and pump output to the application. This
and economical performance, Komatsu Common Rail) system
provides the flexibility to match equipment performance to
has developed the main components with the job at hand.
a total control system. The result is a new
generation of high performance and Working Mode Application Advantage
environment-friendly excavators. ● Maximum production/power
Low Emission Engine Low Operation Noise P Power mode
● Fast cycle times
Low Fuel Consumption Komatsu SAA6D107E-1 engine is EPA Enables low noise operation Economy ● Good cycle times
E
mode ● Better fuel economy
The newly-developed Komatsu Tier 3 and EU Stage 3A emissions using the low-noise engine and
certified, without sacrificing power or methods to cut noise at source. L Lifting mode ● Suitable attachment speed
SAA6D107E-1 [ecot3] engine enables
NOx emissions to be significantly machine productivity. Electronically controlled Breaker ● Optimum engine rpm,
B mode hydraulic flow
reduced with the accurate multi-staged common rail type engine
Attachment ● Optimum engine rpm,
fuel injection by the engine controller. It • Multi-staged injection ATT mode hydraulic flow, 2way
improves total engine durability using • Highly-rigid cylinder block
Low noise design Work priority
the high-pressure fuel injection system P P mode
developed specifically for construction • Optimal arrangement of sound Fuel priority
machinery. This excavator significantly absorbing materials E E mode
reduces hourly fuel consumption using • Partition between the cab L L mode
the highly-efficient matching techniques and engine room
of the engine and hydraulic unit and • Airtight valve room
B B mode
4 5
PC228US-8 H Y D R A U L I C E X C AVAT O R HYDRAULIC EXCAVATOR
PC228US-8 0
OPERATION FEATURES
Safe Operation with Small Tail Swing Even in Confined Areas Wide Working Ranges
Wide angle of PC228US-8 boom operation enhances
Round Profile of both Front and Rear Portion of the
Upper Structure
overall working performance. Komatsu hydraulic excavators with short tail swing radius design
3990 mm 13'1"
Short Implement Swing Short Tail Swing Radius: Job sites that require a long upper reach, such as adopt the round profile for both left and right corners of the front
Radius: 1680 mm 5'6"—Because the tail demolition and slope cutting, also benefit from the portion of the upper structure as well as its rear portion that features
2310 mm 7'7"—Boom raising of the PC228US-8 is more wide digging and dumping ranges of the PC228US-8. less protrusion from the track at swing. The round profile design
angle of the PC228US-8 is larger compact than conventional contributes to the prevention of contact accident at swing and allows
than the PC200-8, while front models, the PC228US-8 reduces the machine to work in tight quarters or job sites where there are
implement protrusion is reduced. the operator’s need to check PC228US-8 some obstacles.
behind him for swing operation. Max. digging reach
9875 mm 32’5"
Minimum implement
swing radius
2310 mm 7'7"
Demolition
Lane width
4.5 m "' The machine needs less working space and can perform
efficient demolition work since it has large and ample
digging height.
6 7
Photo may include optional equipment.
PC228US-8 H Y D R A U L I C E X C AVAT O R HYDRAULIC EXCAVATOR
PC228US-8 0
WORKING ENVIRONMENT
PC228US-8 cab interior is spacious and provides a comfortable working Features
environment…
ROPS Cab Emergency Escape Hammer Rear View Monitoring System
8 9
PC228US-8 H Y D R A U L I C E X C AVAT O R HYDRAULIC EXCAVATOR
PC228US-8 0
MAINTENANCE FEATURES
Easy Maintenance Washable Floor
The PC228US-8’s floor is easy to keep
Side-by-side Cooling
The oil cooler, aftercooler and radiator
High Efficiency Fuel Filter
Fuel system
Komatsu designed the PC228US-8 to Optimum Maintenance Layout clean. The gently inclined surface has are installed side by side. As a result, reliability is even
have easy service access. By doing so, a flanged floor mat and drainage holes it is very easy to clean the radiator, etc. better with high
Through the left and right side service
routine maintenance and servicing are
to facilitate run off. In addition, the operator can remove efficiency fuel filter.
doors, it is possible to access the major
and install the
less likely to be skipped, which can maintenance points from ground level.
Aftercooler Oil cooler
aftercooler, Radiator
reduce costly downtime later on. Here Furthermore, the fuel drain valve, Dust-proof net
are some of the many service features
radiator and
engine oil filter, swing machinery oil
oil cooler in a
found on the PC228US-8.
filler, and PTO oil filler are remote
short time
mounted, facilitating easy maintenance.
period.
Equipped with the Fuel Pre-filter
!
!
(with Water Separator) !
"
!
0$
! #
" ! 1") -")
Removes water and ! $ %&
! '
" ( )
! ) **
2)
!
2)
! /( ) **
Maintenance Costs Reduced
contaminants in the ! *
+
,-) -
"*
. ! /(
fuel to prevent fuel ! /(
!
Eco-white Filter Element
problems. High performance filters are used in the hydraulic circuit and Engine oil &
engine. Longer hydraulic oil, hydraulic oil filter, engine oil and
Engine oil filter every500 hours
engine oil filter element replacement intervals significantly reduce Hydraulic oil every 5000 hours
maintenance costs. Hydraulic oil filter every 1000 hours
controller finds
2
1 2 3
3
any abnormality,
4
it is displayed
7 5
on the LCD.
6
7
6 8
4 5
Maintenance function
Basic operation
switches Monitor informs replacement time of oil
1
8 2
and filters on
3
4
LCD when the
5
6
replacement
interval is
1 2 3
Function reached.
Basic switches
4 5 6
operation
switches Trouble data memory function
Monitor stores abnormalities for
Air conditioner
operation effective troubleshooting.
switches
SPECIFICATIONS
ENGINE SWING SYSTEM DIMENSIONS
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D107E-1 Driven by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motor
PC228US-8 PC228USLC-8
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Boom Length 5700 mm 18'8" 5700 mm 18'8"
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Arm Length 2925 mm 9'7" 2925 mm 9'7"
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Swing lock . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical-disc brake
and pressure-compensated valve COOLANT AND LUBRICANT A Maximum digging height 10700 mm 35'1"
Hydraulic motors: Final drive, each side . . . . . . . . . . . . . . . . . . . . 5.2 ltr 1.4 U.S. gal F Maximum digging reach 9875 mm 32'5" 8720 mm 28'7" 7930 mm 26'0"
12 13
LIFTING CAPACITY WITH LIFTING MODE STANDARD EQUIPMENT
) A: Reach from swing center Conditions: ● Air cleaner, double element ● Dustproof net for radiator and oil cooler ● Track guiding guard, center section
B: Bucket hook height ● 5700 mm 18'8" one-piece boom with auto dust evacuator ● EMMS monitoring system ● Track roller
C: Lifting capacity ● 0.8 m3 1.05 yd3 SAE heaped bucket ● Auto air conditioner ● Engine, Komatsu SAA6D107E-1 —PC228US-8, 7 each side
Cf: Rating over front ● Shoe width: ● Auto deceleration ● Engine overheat prevention system —PC228USLC-8, 9 each side
Cs: Rating over side —PC228US-8 600 mm 24" triple ● Automatic de-airation system for fuel line ● Hydrauric track adjusters (each side) ● Track shoe
: Rating at maximum reach grouser ● Automatic engine warm-up system ● Multi-function color monitor —PC228US-8, 600 mm 24" triple grouser
* ● Alternator, 35 Ampere, 24 V ● Lights, 3 (boom and cab) —PC228USLC-8, 700 mm 28" triple
● Batteries, 110 Ah/2 x 12 V ● Power maximizing system grouser
+ ● Boom holding valve ● PPC hydraulic control system ● Travel alarm
● Cab which includes: antenna, AM/FM ● Pump/engine partition cover ● Working mode selection system
PC228US-8 Arm: 2925 mm 9'7" Bucket: 0.8 m3 1.05 yd3 SAE heaped Shoe: 600 mm 24” triple grouser radio, floor mat, intermittent front wind- ● Rear reflector
A MAX 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9' shield wiper and washer, large ceiling ● Rearview mirrors, RH, LH, rear, sidewise
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs hatch, pull-up front window, removable ● ROPS cab (ISO 12117-2)
6.0 m *2820 kg 2670 kg *3140 kg 2670 kg *4290 kg 4090 kg lower windshield, sliding door ● Slip-resistant Plates
19' *6,200 lb 5,900 lb *6,900 lb 5,800 lb *9,400 lb 9,000 lb window, sliding seat ● Starting motor 4.5 kW
4.5 m *2840 kg 2220 kg 4090 kg 2620 kg *4950 kg 3920 kg *5530 kg *5530 kg ● Cooling fan, mixed flow with fan guard ● Suction fan
14' *6,200 lb 4,900 lb 9,000 lb 5,700 lb *10,900 lb 8,600 lb *12,200 lb *12,200 lb ● Counterweight, 6050 kg 13,300 lb ● Swing holding brake
3.0 m *3000 kg 1980 kg 3970 kg 2510 kg 5780 kg 3690 kg *7820 kg 5900 kg *11680 kg 11430 kg
9' *6,600 lb 4,300 lb 8,700 lb 5,500 lb 12,700 lb 8,100 lb *17,200 lb 13,000 lb *25,700 lb 25,200 lb
1.5 m 3080 kg 1880 kg 3830 kg 2380 kg 5530 kg 3460 kg 8860 kg 5400 kg *6880 kg *6880 kg
4' 6,800 lb 4,100 lb 8,400 lb 5,200 lb 12,100 lb 7,600 lb 19,500 lb 11,900 lb *15,100 lb *15,100 lb
0m 3150 kg 1910 kg 3740 kg 2290 kg 5330 kg 3280 kg 8490 kg 5080 kg *5230 kg *5230 kg
0' 6,900 lb 4,200 lb 8,200 lb 5,000 lb 11,700 lb 7,200 lb 18,700 lb 11,200 lb *11,500 lb *11,500 lb
–1.5 m 3430 kg 2080 kg 3690 kg 2240 kg 5220 kg 3190 kg 8340 kg 4960 kg *9330 kg *9330 kg
-4' 7,500 lb 4,600 lb 8,100 lb 4,900 lb 11,500 lb 7,000 lb 18,400 lb 10,900 lb *20,500 lb *20,500 lb
OPTIONAL EQUIPMENT
–3.0 m 4100 kg 2510 kg 5220 kg 3180 kg 8370 kg 4990 kg *14890 kg 9950 kg
–9' 9,000 lb 5,500 lb 11,500 lb 7,000 lb 18,400 lb 11,000 lb *32,800 lb 21,900 lb
● 12V power supply ● Cab front guard ● Seat, suspension
–4.5 m 5810 kg 3570 kg 8570 kg 5160 kg *13590 kg 10260 kg ● Alternator, 60A —Full height guard ● Service valve
–14' 12,800 lb 7,800 lb 18,900 lb 11,300 lb *29,900 lb 22,600 lb
● Arm, 2925 mm 9'7" —Half height guard ● Shoes, triple grouser
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097. ● Arm holding valve ● Dust proof net for machine cab —PC228US-8:
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
● Batteries, large capacity ● Hydraulic control unit 700 mm 28", 800 mm 31.5"
● Boom, 5700 mm 18'8" —1 additional actuator —PC228USLC-8:
● Cab accessories ● KOMTRAX 600 mm 24", 800 mm 31.5"
) A: Reach from swing center Conditions: —Rain visor ● Rear view monitoring system ● Track roller guard (full length) for STD track
B: Bucket hook height ● 5700 mm 18'8" one-piece boom —Sun visor ● Seat belt, retractable ● Track frame undercover
C: Lifting capacity ● 0.8 m3 1.05 yd3 SAE heaped bucket
Cf: Rating over front ● Shoe width:
Cs: Rating over side —PC228USLC-8 700 mm 28" triple
: Rating at maximum reach grouser
*
+
PC228USLC-8 Arm: 2925 mm 9'7" Bucket: 0.8 m3 1.05 yd3 SAE heaped Shoe: 700 mm 28” triple grouser
A MAX 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
6.0 m *2820 kg *2820 kg *3140 kg 3130 kg *4290 kg *4290 kg
19' *6,200 lb *6,200 lb *6,900 lb 6,900 lb *9,400 lb *9,400 lb
4.5 m *2840 kg 2630 kg *4700 kg 3080 kg *4950 kg 4560 kg *5530 kg *5530 kg
14' *6,200 lb 5,800 lb *10,300 lb 6,800 lb *10,900 lb 10,000 lb *12,200 lb *12,200 lb
3.0 m *3000 kg 2370 kg 5060 kg 2970 kg *5990 kg 4320 kg *7820 kg 6880 kg *11680 kg *11680 kg
9' *6,600 lb 5,200 lb 11,100 lb 6,500 lb *13,200 lb 9,500 lb *17,200 lb 15,100 lb *25,700 lb *25,700 lb
1.5 m *3290 kg 2270 kg 4920 kg 2840 kg 7030 kg 4090 kg *9990 kg 6370 kg *6880 kg *6880 kg
4' *7,200 lb 5,000 lb 10,800 lb 6,200 lb 15,500 lb 9,000 lb *22,000 lb 14,000 lb *15,100 lb *15,100 lb
0m *3800 kg 2310 kg 4820 kg 2750 kg 6870 kg 3900 kg 11020 kg 6040 kg *5230 kg *5230 kg
0' *8,300 lb 5,000 lb 10,600 lb 6,000 lb 15,100 lb 8,600 lb 24,200 lb 13,300 lb *11,500 lb *11,500 lb
–1.5 m 4430 kg 2510 kg 4770 kg 2700 kg 6760 kg 3810 kg 10960 kg 5920 kg *9330 kg *9330 kg
-4' 9,700 lb 5,500 lb 10,500 lb 5,900 lb 14,900 lb 8,300 lb 24,100 lb 13,000 lb *20,500 lb *20,500 lb
–3.0 m 5290 kg 3000 kg 6750 kg 3800 kg *10920 kg 5940 kg *14890 kg 11990 kg
–9' 11,600 lb 6,600 lb 14,800 lb 8,300 lb *24,000 lb 13,100 lb *32,800 lb 26,400 lb
–4.5 m *7030 kg 4240 kg *9510 kg 6120 kg *13590 kg 12180 kg
–14' *15,500 lb 9,300 lb *20,900 lb 13,500 lb *29,900 lb 26,800 lb
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
14 15