Professional Documents
Culture Documents
How To Use This Competency-Based Learning Materials: Sector: Qualification Title Unit of Competencies Module Title
How To Use This Competency-Based Learning Materials: Sector: Qualification Title Unit of Competencies Module Title
Work through all the information and complete the activities in each
section.
Read information sheets and complete the self-check. Suggested
references are included to supplement the materials provided in this
module.
Most probably your trainer will also be your supervisor or manager.
He/She is there to support you and show you the correct way to do
things.
You will be given plenty of opportunity to ask questions and practice
on the job. Make sure you practice new skills during regular working
shifts. This way you will improve both your speed and memory and
also your confidence.
Use the Self Checks, Operation Sheets or Job Sheets at the end of
each section to test your own progress.
When you feel confident that you have had sufficient practice, ask you
trainer to evaluate you. The results of your assessment will be
recorded in your Progress Chart and Accomplishment Chart.
You need to complete this module before you can perform the next module.
List of Competencies
PARTICIPATE IN Participating in
1. WORK PLACE workplace 500311105
COMMUNICATION communication
PRACTICE
Practicing occupational
500311108
4. OCCUPATIONAL
health and safety
HEALTH AND SAFETY
COMMON COMPETENCIES
PERFORM
Performing computer
ELC311203
2 COMPUTER
operations
OPERATIONS
PERFORM Performing
4. MENSURATION AND mensuration andELC311201
CALCULATION calculation
CBLM on Electronic Date Developed: Document No.
Products Assembly Issued by: Page
and Servicing NC II Date Revised:
TERMINATE AND
Terminating and
CONNECT
connect electricalELC724202
6. ELECTRICAL WIRING
wiring and electronic
AND ELECTRONIC
circuits
CIRCUITS
CORE COMPETENCIES
ASSEMBLE
Assembling electronic
ELC724335
1. ELECTRONIC
products
PRODUCTS
SERVICE COMSUMER
Servicing consumer
ELECTRONIC ELC724336
2. electronic products and
PRODUCTS AND
system
SYSTEM
SERVICE INDUSTRIAL
ELECTRONIC Servicing industrial
3. MODULES, ELC724337
electronic modules,
PRODUCTS AND products and system
SYSTEM
MODULE CONTENT
ASSEMBLE ELECTRONIC PRODUCTS
LEARNING OUTCOMES:
At the end of this module you MUST be able to:
1. Prepare to assemble electronic products
2. Prepare/ Make PCB modules
3. Mount and solder electronic components
4. Assemble electronic products
5. Test and inspect assembled electronic products
ASSESSMENT CRITERIA:
1. PCB layout is verified for conformity with the schematic diagram in
accordance with the lay out rules
2. PCB layout is transferred to copper-cladded board following
acceptable methods and standards
3. Visual inspection is performed based on standards procedures
4. Thru-hole is drilled based on standards procedures
5. PCB is cleaned based on standards procedures
6. Functionality of PCB is tested and visual inspection is performed
based on standards procedures
Assessment Criteria
Conditions
4.