Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

ARL-700

Firmware Version Update

V1.2
Publisher ARKEL Elektrik Elektronik San. ve Tic. A.Ş.

Eyüp Sultan Mah. Şah Cihan Cad. No: 69 Sancaktepe – İstanbul / TÜRKİYE

+90 (216) 540 67 24 – 25

+90 (216) 540 67 26

info@arkel.com.tr

www.arkel.com.tr

Technical Support +90 (850) 311 42 43

+90 (541) 909 43 49 (WhatsApp )


support@arkel.com.tr
Date of issue 20.11.2018

Revision Date 19.03.2019

Document version V1.2

Document Number

Copyright © 2019, ARKEL Elektrik Elektronik San. ve Tic. A.Ş.

This document has been created to be a guide for Arkel customers. Reproduction, transfer, distribution or storage of
part or all the contents in this document in any form without the prior written permission of Arkel is prohibited. Arkel
reserves the right to make changes and improvements to any of the products described in this document without prior
notice.

Arkel is not responsible for those mistakes that may be found in this manual and for the damages that they may cause.

ARKEL 2 ARL-700
Firmware Version Update www.arkel.com.tr

Content
Content ...................................................................................................................................................................................... 3
Step 1 : Downloading Firmware File ........................................................................................................................................... 4
Step 2: Copying Firmware File to SD Card ................................................................................................................................... 6
Step 3:Firmware Update Process ................................................................................................................................................ 7
A. Firmare Update by using Arem Hand Terminal: ................................................................................................................... 7
B. Firmware Update by ARL700 Keypad: .................................................................................................................................. 8

ARKEL 3 ARL-700
Firmware Version Update www.arkel.com.tr

Step 1 : Downloading Firmware File


NOTE: if already you have the latest firmware version file of Arcode go to Step 2 directly
- To download the latest firmware version of Arcode, go to ARKEL official website www.arkel.com.tr

Note: you need to have Username and Password, to be able to download any document from ARKEL
website. If you don’t have an account, go to http://schema.arkel.com.tr/en/Account/Login then click "New
User Registration" after submitting registration information you will get user account password.
Note: Arcode and ARL700 firmware versions are same after “17121367” version.

- Click “TECHNICAL SUPPORT” from Menu bar and follow below steps.

- After logging In, from "Software "menu go to "ARL700 Elevator Control Board "→"System Firmwares "
→”ARL700 Firmwares (as seperate downloads)” (as below picture)

ARKEL 4 ARL-700
Firmware Version Update www.arkel.com.tr

- Scroll down until you find the latest firmware version on the bottom of list then download it.

Note: if there is no SD card on Arem (or no Micro SD card on


ARL700 device if you don’t use Arem ), you can use 2GB
industrial type SD card.
You should download ARL 700 SD card contents from
http://schema.arkel.com.tr/en link. Then select “software”
→“Arcode integrated elevator driver”→”System Firmwares”
→”Arem SD card Contents (Complete)”
After downloading is done, copy “arcode” file inside Micro SD
card/ SD card.

Downloading Arem SD card Contents (Complete)

ARKEL 5 ARL-700
Firmware Version Update www.arkel.com.tr

Step 2: Copying Firmware File to SD Card

- Plug AREM SD to your computer. On SD card directory you should see “Arcode” file,
then go to following link "\system\firmware"

- At "firmware " directory paste firmware version file (with “.ars” extinction ) that you downloaded at step 1.
Note: You can see all version of ARL700/Arcode Firmware versions on “firmware” directory.

- Then if it’s SD card, after plugging it to Arem Hand terminal make go to step 3.A and make update,
if its Micro SD card, after plugging it to ARL700 device go to Step3.B and make update.

ARKEL 6 ARL-700
Firmware Version Update www.arkel.com.tr

Step 3:Firmware Update Process

A. Firmare Update by using Arem Hand Terminal:

- After plugging SD card into Arem Handset press "tools" button then "firmware Update"

- From "firmware update" Select the latest version whitchs located on the top of version list.
Note: according version releasing date that you downloaded to SD card, you will see the version date on
Arem firmware update screen.

- Press "Enter" button on AREM Handset, then you will see confirmation message select "Yes" to start
updating procces.

Warning 1: Don't plug out AREM Handset socket during update process on (Step 3).

Warning 2: Before starting update process (step 3), don't forget to connect all peripherals witch are
communicating with Arcode through Can Bus. Otherwise ARL700 won't be able to identify them later.

Note: In case of power shutdown during update procces. you should repeat Step 3 again after powering the system.

ARKEL 7 ARL-700
Firmware Version Update www.arkel.com.tr

B. Firmware Update by ARL700 Keypad:

Press Right Direction button on keypad (White button beside yellow and red buttons)
for several times (18 times).

Then you should find (“SD Card operations”) as shown on below parameters:

1- Then PRESS enter ( ) 2- Enter your device password then PRESS enter ( )
Note: ARL 700 factory default passwords is “000000”

3. PRESS enter ( ) to select firmware version. 3- PRESS UP/DOWN direction buttons ( ) to select
4- firmware version.
Then press enter ( )

5- By right direction button ( ) select “Yes” then


press enter ( )

Note: In case of power shutdown during update procces. you should repeat Step 3 again after powering the system.

ARKEL 8 ARL-700

You might also like