Professional Documents
Culture Documents
Instruction Sheet Is Hp9012 - Style Number Hp9012K Hp9012Tb
Instruction Sheet Is Hp9012 - Style Number Hp9012K Hp9012Tb
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445
STYLE NUMBER : HP9012K , HP9012TB
www . quoizel . com
F
G
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 20 - 30 minutes
● Tools Required for Assembly (not included) : Flathead Screwdriver , Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses &4, 60 Watt, Type - B Cand Base Bulbs.
● Helpful Tools (not included) : Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a. Unscrew the Lock Screws from the Cage by using
screwdriver. Take away the Fixture Hood from the top of
Fixture Hood
Lock Screw
Cage with
Shade
1 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER : HP9012K , HP9012TB
STEP 2:
a. Locate the Nipple through the Waterproof Washer and
screw into the Lock Ball. Proceed to locate the Nipple Lock Ball
through the hole on the top center of the Fixture Hood.
b. Locate the Lock Washer over the Nipple and thread the Hex
Nut onto the Nipple to secure the Lock Ball. Tighten until Waterproof Washer
snug. Nipple
Lock Washer
Hex Nut
Fixture Hood
STEP 3 :
a. Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
STEP 4:
a. Locate the Fixture Hood onto the top edge of the Cage and
match mounting holes on the bottom edge of it onto the
holes on the top edge of the Cage.
b. Using screwdriver, thread Lock Screws into mounting holes
on the bottom edge of the Fixture Hood. Hand tighten until Fixture Hood
snug.
Lock Screw
STEP 5 :
a. Carefully fit the Post Fitter over the end of the Post
( not supplied ), making sure the Post Fitter is fully
seated .
b . Refer to Step 6 for wire connections .
c . Coat the top 1 " of the Post with Clear Silicone Caulk
( not supplied ) and position the Post Fitter onto the
Post . Be sure to seat it completely. Secure the Fixture
Post Fitter
to Post with ( 3 ) Mounting Screws .
Mounting Screw
Mounting Hole
2 OF 3
INSTALLATION INSTRUCTIONS STYLE NUMBER : HP9012K , HP9012TB
STEP 6 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
3 OF 3