Professional Documents
Culture Documents
NWL Lilin Ld2222 Hardware Manual
NWL Lilin Ld2222 Hardware Manual
IPD2220ES / LD2222E
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-IPD222CSE Instr uction Manual
IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
CAUTION
Do not drop or strike this equipment.
Sensitive electronics inside are vulnerable to excessive shock.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
3
39 4
5
6
7
8
10
Unit: mm
1 Bottom Chassis
2 DC12V Power Input Jack
3 RJ-45 Network Connector
4 Dome Cover
5 Microphone
6 Mask
7 Camera Body
8 Network Indicator LEDs
Green(LINK): Network cable connected, this LED lit.
Orange(ACT): Data communications, this LED flashes.
9 Micro SD Card Slot
10 Reset Key
To restore the server to factory default setting.
INSTALLATION
1. Please use the enclosed hexagon screw driver to untighten the 3 screws on the
dome cover (FIG.1).
FIG. 1
2. Put the provided screws (M3.0*25, wooden screw) through the holes marked as
"a", and fix the bottom chassis in the desired area (FIG.2 & FIG.3).
20°
45.7
a
a a
62° 62°
FIG. 2 FIG. 3
3. Loosen the screws on the camera body cover to rotate the camera body to the
desired angle and then tighten the screws (FIG.4 & FIG.5).
FIG. 4 FIG. 5
4. Put on the dome cover, use hexagon screw driver to screw dome cover into
bottom chassis and then tighten the screws (FIG.6).
FIG. 6
PRODUCTION COMPONENTS
1. 2 Megapixel 1080P HD 2. Instruction Manual
Dome IP Camera
H.264 Full HD IP Cameras
IPD552EX2.2/4.2 N/P
INSTRUCTION MANUAL
1080P HD Dome IP Camera
IPD2220ES / IPD2220ELS
Instr uction Manual
SYSTEM ARCHITECTURES
For connecting IPD2220ES & LD2222E series to the network, please follow one of the
system architectures:
(1). Use with PoE of the network switch connected to the network.
PoE Switch
1080P HD Dome
IP Camera
PC
(2). Use PoE power injector and the network switch connected to the network.
AC
1080P HD Dome PoE Power Injector Non-PoE Switch
IP Camera
PC
(3). Use DC12V power adapter and network switch connected to a network.
Non-PoE Switch
1080P HD Dome
IP Camera
PC
DC12V Adaptor
NOTE
For the convenience of users, restore the factory default settings will revert to the
default IP address 192.168.0.200.
SPECIFICATIONS
IPD2220ES (1080P 30fps)
1080P HD DOME IP CAMERA
Model No. IPD2220ES4.3
Focal Length 4.3mm
Lens Iris F1.6
Angle of view 70°(H), 51 ° (D), 89 ° (D)
Pick Up Element 1/2.7" CMOS Image Sensor
Effective Pixels 1920(H) x 1080(V) = 2,073,600(pixel)
Chip Size 5.856mm(H) x 3.276mm(V)
Scanning System Progressive Scan
Minimum Illumination 0.6Lux at F1.6
White Balance Auto/ Tungsten/ Indoor/ Fluorescents1/ fluorescents2/ Outdoor1/ Outdoor2
Back Light Compensation Off/ On
Electronic Shutter 1/30(25)s ~ 1/8000s
Sense Up Off/ 1Frame/ 2Frames/ 3Frames/ 7Frames
Sense Up Plus Yes
Auto Gain Control 36dB Variable Gain
3D Noise Reduction Off/ 1~32 Selectable
2D WDR Off/ On
Privacy Masking Off/ On (4 zones)
Image Effects Brightness, Contrast, Hue, Saturation, Sharpness, Mirror, Flip
Operating Temperature -25 ° C ~ +50 ° C (-13 ° F ~ 122 ° F)
Dimension ψ105 x 39mm
Weight 250g
Power SInput Voltage PoE (IEEE 802.3af compliant)
Power Consumption 5W
66-IPD222CSE-2
1080P HD Dome IP Camera
IPD2220ES / LD2222E
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-IPD222CSE Instr uction Manual