Professional Documents
Culture Documents
Advanced Modelling
Advanced Modelling
Advanced Modelling
The bend option allows the user to The twist option allows the user to twist The stretch option allows the user to
bend geometry along a defined path geometry around an axis of revolution. stretch geometry by defining two points
by selecting two points with the bend The deformation is created by defining and applying a movement to the second
deformation applied as a movement two points which defines the axis and point. The first point defines the holding
to the second point. The first point axis length. The user controls the twist position and curvature constraint and the
defines the holding position where the by defining a rotation value around the second point controls the movement of
curvature weight is constrained and axis and the curvature constraint at the the stretch.
the second point can be dynamically start and end positions. The length of
moved to simulate the bend movement the axis line will control the severity of Although the movement distance
allowing you to achieve the deformation the twist across the entire geometry. controls the stretch value, the start and
required. end application point are important as
Practical applications include sheet they also control the zone in which the
It is also possible to fix the position of end metal twist compensation and product geometry deformation will be applied.
point and control the bend movement in- design variants.
between the selected points to simulate
a central bend.