Professional Documents
Culture Documents
M Series Switch Operator: E N E R G Y L I N E
M Series Switch Operator: E N E R G Y L I N E
M Series Switch Operator: E N E R G Y L I N E
M Series
Switch
Operator
w Fully integrated and tested switch EnergyLine’s M Series Switch Operators charging voltages. The Switch Operator
operator are fully integrated, microprocessor-based tests the battery at regular intervals and
controls that let you automate almost any will flag low or bad battery conditions. If
w Works with most distribution- distribution-class switch. By combining the battery voltage drops below a
class switches and testing the electromechanical certain value, the Switch Operator is
w Automates retrofitted or new components, RTU, control, and communi- automatically disabled to prevent
installations cations as a single package, we also improper operation or deep discharge of
added intelligence, increased reliability, the battery.
w Provides torsional or and reduced costs.
reciprocating operation
And the M Series Switch Operator has REMOTE OPERATION
w Protects switches from partial unique intelligence to go with its power. EnergyLine’s completely integrated
open or close operations By monitoring the switching cycle, it can design lets you monitor and control the
automatically take corrective action in the Switch Operator from a SCADA master
w Uses microprocessor control for event of stuck, frozen, or welded con-
all functions station. EnergyLine offers factory- or
tacts. This protects your equipment from field-installed communications devices
w Field-proven single power supply/ partial operations. for the system of your choice, as well as
battery system With the fault sensing option, the Switch an array of communications protocols.
Operator can also isolate faults without
w Fast, easy, and precise setup the need for expensive line post current SOFTWARE CONTROL
w Full range of safety features sensors. Sectionalizing is based on ARCHITECTURE
voltage loss (with or without prior fault).
w Emergency override commands All of EnergyLine’s utility products run
POWER SUPPLY/BATTERY SYSTEM under the supervision of a state-of-the-
w Loss of voltage operation art operating system for increased
EnergyLine uses a single power source reliability and maintainability. The menu-
w Fault sensing option for the entire package, thereby reducing driven Setup software lets you select
w Dependable, cost-effective failure rates inherent in non-integrated setpoint values and reduce the setup
systems with multiple power supplies and time. A standard DB9 serial data port on
solution for remote switching
batteries. This highly efficient, field- the faceplate (or optional optical port)
proven switching power supply delivers provides easy access to the Switch
FLEXIBLE both 12 and 24 VDC to the entire system, Operator using a PC. The Switch
INTELLIGENT as well as a trickle charge to the batteries
AUTOMATION
Operator’s integrated package also
for maximum battery life. It also provides includes data logging and troubleshoot-
accurate, temperature-compensated ing information.
EnergyLine Systems, Inc.
1135 Atlantic Avenue
Alameda, CA 94501 A U T O M A T I O N B Y E N E R G Y L I N E
AUTOMATION BY ENERGYLINE
Three-point latching
Padlockable handle
Safety interlock
operating handle
(storage position shown)
Door retainer
Lockout point
Decoupler
ALIGN switch
(for setting travel limits)
AC fuse
Universal Communications
Mounting Plate
© 1998 by EnergyLine Systems, Inc. All rights reserved. Printed in the USA.
E N E R G Y L I N E
5"
1.5"
5" 3.795"
ENERGYLINE ENERGYLINE
9.5"
42" 30.5"
24" 12" 24"
12.83" 12.545"
12.83" 24" 20.827" 24"
• ‚ ƒ „ … † ‡ ˆ
M T S - D RK 0 - 0 FH SA
Operation Operating Rod Shroud
Enclosure Radio Faulted Circuit Indicator
Protocol Antenna
Remote Communications Communications Installation
Hardware
EnergyLine and the EnergyLine logo are registered trademarks of EnergyLine Systems, Inc. All other trademarks are the property of their respective holders.
M Series
S P E C I F I C A T I O N S
1
Battery carryover varies with battery type, age, ambient temperature, communications option installed, and number of
operations.
2
Consult EnergyLine for current list of communications hardware and protocols supported.
ENERGYLINE 1135 Atlantic Avenue, Alameda, CA 94501 Tel. (510) 864-6850 email: info@elsi.com www.energyline.com