Professional Documents
Culture Documents
Shera Floor Board Installation
Shera Floor Board Installation
Shera Floor Board Installation
Floor Installation
• Steel frame with thickness 2 mm up is
recommended
• Spacing frame is 60x60 cm supported
SHERA flexy board thickness 15 mm up
• Jointing is fixed on frame only
Floor Installation
SHERA flooring board thickness 18 mm. 1750 1150 980 930 580 410 230
Floor Installation
Floor Installation Tiled floor
Tiled floor
Step 1
• Install SHERA flooring board 18
mm. thickness according to
SHERA standard.
Step 2
• Apply tile adhesive primer (weber/prim 2) in order to improve bonding
between flooring board & tile adhesive, as well as to protect flooring
board from moisture ingress.
• Wait until dry (according to manufacturer recommendation)
Floor Installation
Tiled floor
Step 3
• Apply tile adhesive: flexible type (weber.tai flex) on top of
primer, using notched trowel to spread and level the adhesive.
Floor Installation
Tiled floor
Step 4
• Fix ceramic tile on top of tile adhesive.
• Wait until it completely dry before grouting the joint
Wet Area system
Wet Area system
Flooring board
Flexy board 18 mm
Wet Area system
Recommended Tool
Specification Specification
Power input 550 W 2.0 amps
Speed 0 – 2500 rpm 13,500 rpm
Specification Specification
• Blade diameter 110 mm (4 3/8”) Diamond Blade
• Max. cutting capacity 32 mm
(1¼”)
• Continuous rating input 1,200 w
• No load speed 13,000 rpm