Professional Documents
Culture Documents
Class 4 Insulating Gloves HV High Voltage Gloves 36000V 33kV 36kV
Class 4 Insulating Gloves HV High Voltage Gloves 36000V 33kV 36kV
Ergonomic shape
With an ergonomic shape our gloves are suitable for any type of
hand and are soft and supple which allows good dexterity.
Bi-color
Bi-color gloves on class 1/2/3/4
allows contrast to rapidly detect
any excessive abrasion, cut, tear
and other mechanical surface
damage that could alter the
dielectric properties of the glove.
Clear-marking
Rolled cuff
Rolled cuff for comfort
& ease of handling.
22
PPE - CPE / Insulating rubber gloves
PPE - CPE
01 - 14
Symbol appears
only on mechanical
gloves.
CG-2 CGM-3
• Insulating rubber gloves should be chosen according to their class, • Insulating rubber gloves can have other environmental resistance
which corresponds the voltage level used. properties, and they are classified into categories.
All insulating gloves must be visible inspected after inflation and be used without having been tested within the last six months.
before each use. Normal testing periods are between 30 and 90 days.
For Classes 0 and 00: The tests consist of An inspection of the inside of the gloves is also recommended.
an air inflation test and a visual inspection Gloves should be stored in their packaging, without being
when the glove is inflated. The dielectric test compressed or folded. They should not be stored near a heat
is not required, but it may be performed at the owner's request. source with a temperature of 10 to 21°C.
For Classes 1, 2, 3, and 4: Even when in storage, a glove should
23
PPE - CPE / Insulating rubber gloves
Insulating rubber gloves
Gloves without mechanical protection for use with silicon leather glove covers.
CG-2
GLOVES GLOVES Reference GLOVES Size OVERGLOVES OVERGLOVES Reference OVERGLOVES Size
A=8 8
CG-05-(*) B=9 9
CG-981-(*)
CG-10-(*) C = 10 10
D = 11 11
7
CG-1-(**)-NR 8
8
CG-2-(**)-NR 9 9
CG-991-(**)
CG-3-(**)-NR 10 10
CG-4-(**)-NR 11 11
12 12
(*) References to be completed by size A, B, C or D.
Check your gloves size page 170. (**) References to be completed by size 07, 08, 09, 10, 11, 12 (07 and 12 on request).
Mechanical gloves
Insulating gloves with higher mechanical properties for working in full safety with- EN 60903 / IEC 60903
out leather overgloves.
Symbol appears
Arc flash tested: IEC 61482-1-2. Class 2.
only on mechanical
ASTM F2675/F2675M
gloves.
Reference Characteristics g
CG-117 * Pneumatic glove tester 600
* Delivered in cardboard 140 x 150 x 160.
Gloves box
Specially designed for protecting insulating gloves.
Can be fixed on wall.
Total length
mm
Dimensions g Weight 25
PPE - CPE / Insulating gloves
Insulating gloves
Undergloves
These washable cotton undergloves improve the
use of the insulating gloves. They bring the best
held, hygiene and a greater comfort.
Reference Size g
H = Men Washable cotton
CG-80-(*) F = Women 28 undergloves.
(*) References to be completed by size H ou F.
EN 20347 / EN 50321
Insulating over shoes
Overshoes which provide electrical insulation to protect
operators against the risk of a current flow from the feet to Classe 0:
the ground or a step voltage. 1 kV AC - 1.5 kV DC.
Adapted to a temporary and frequent use.