Professional Documents
Culture Documents
ECS-OT444 OS-Casambi Application Guide
ECS-OT444 OS-Casambi Application Guide
ECS-OT444 OS-Casambi Application Guide
us/ds
Light is intelligent
OPTOTRONIC® Programmable LED Drivers
and Casambi Bluetooth® Controller
Application Guide
Light is OSRAM
Technology partner:
Application Guide | Contents
Contents
Please note:
2
Overview | Benefits
3
LED Driver with DEXAL® Technology and Casambi Bluetooth® Controller | Product features
Driver features
— Two-way communication and power between driver and
fixture-integrated components
— Enables exact luminaire-specific data including:
– Power consumption
– Temperature profile
– Operating hours
The OSRAM OPTOTRONIC® Programmable LED Driver with – Diagnostics
DEXAL Technology, is a non-proprietary, intra-luminaire — OEM Programmable with 1mA resolution to perfectly match
interface, based on DALI-2 communications, that enables LED load and maximize performance
bi-directional communications between the driver and the — DALI-2 and D4i certified
Casambi node. It provides exact luminaire-specific data, — DEXAL interface based on DALI-2 communication
including diagnostics, to light management systems. Fixture Integrated OEM programmable features include:
manufacturers can design smart fixtures and streamline the
– Constant lumen maintenance
configuration process by leveraging DEXAL (DALI-2) as a
– End-of-life indication
standard bi-directional communications interface.
– LED thermal protection
The OSRAM OPTOTRONIC Programmable LED Driver with – Dim-to-off
DEXAL Technology is compatible with the following controls: – Soft start
— Programming doesn't require powering up or connecting
the power supply to AC line voltage
— Specification grade dimming down to 1%
— Slim form factors
Configurable features — Input voltage:
End of Life Thermal
– Universal 120-277Vac 50/60Hz
NTC
— UL Class 2 output for safe operation
Protection
DIM to Off
1% <1%
C UL US
LISTED
4
LED Driver with DEXAL® Technology and Casambi Bluetooth® Controller | Product data
Ordering Information
Item Ordering Total Output Output Current Default Output Voltage Dimming Dimming LED Thermal
Number Abbreviation Power Range Current Range (Vdc) Interface2 Range 3 Protection
OTi30
78033 OTi30/120-277/1A0 DX L 30W 150-1050mA1 (programmable) 700mA 10-56V DEXAL 1-100% Yes
OTi50
78034 OTi50/120-277/1A4 DX L 50W 600-1400mA (programmable) 1050mA 10-56V DEXAL 1-100% Yes
OTi85
57432 OTi85/120-277/2A3 DX L 85W 700-2300mA (programmable) 1400mA 10-55V DEXAL 1-100% Yes
1. Output current below 450mA is in PWM (not applicable for 85W).
2. T
he default mode for the interface is DEXAL. This combines the power and communication on the single bus. In this mode, the polarity of the interface is
sensitive. For applications employing DALI systems (wired or wireless), the power supply on the interface can be turned off via the programming software.
This makes the interface non-polarized. For specific compatibility questions, please contact your OSRAM Digital Lighting Systems representative.
3. The minimum output current for both LED drivers is 6mA.
Dimensions
OTi30W and OTi50W
1.0 (25.4)
HEIGHT
OTi85W
+.02
( +0.5
1.00 -.00 25.4 - 0.0 ) 16.32
HEIGHT
(414.5)
SIDE MOUNTING
16.34
(415.0) 1.0°
1.0°
1.0°
1.0°
1.16
1.0°
MOUNTING 1.0°
1.0°
(29.4)
16.73 LENGTH
.34 WIDTH
(425.0)
(8.7)
TYP
Dimensions: in [mm]
5
LED Driver with DEXAL® Technology and Casambi Bluetooth® Controller | Programming
System configuration
~L CH1/WW+
OSRAM GND
CH1/WW- GND
OPTOTRONIC® CH2/CW+ PRG/NTC
120-277VAC CH2/CW-
~N LED Driver with
DALI
DEXAL® Technology
Please reference OTi30, OTi50 and OTi85 OPTOTRONIC® Programmable LED Driver with DEXAL Technology
Specification Sheet for complete technical details on this product.
Using the OT Programmer Configuration Tool, the driver should be programmed in the DEXAL mode to power the
Casambi controller.
6
Tunable White LED Driver and Casambi Bluetooth® Controller | Product features
Driver features
— The driver has two operating modes:
– Two channel mode using DALI Type 6 (for direct/indirect
without color tuning)
– Tunable white mode using DALI Type 8
— DALI compatible controls color temperature and brightness
The OSRAM Tunable White (TW) System with Casambi — OEM programmable with 1mA resolution to perfectly match
Bluetooth controls, provides a digitally controllable lighting LED load and maximize performance
solution which helps simulate natural daylight that reinforces
— Able to interface with LED modules of OEM choice third-party
human wellness and productivity.
LED light engines
Utilizing the system, you can adjust the color temperature — Specification grade dimming down to 1%
and brightness control within the range of 2700K to 6500K
— Dim-to-off
and between 1-100% light intensity. The wallstation (optional)
comes with three, preprogrammed scene buttons that can — Soft start
be customized to control the room’s ambiance. — Integrated OEM programmable features include:
– Constant lumen maintenance
Third party tunable white light engines can be paired with the
– End-of-life indication
OPTOTRONIC TW LED Driver, offering flexibility to OEMs.
– LED thermal protection
Using the OPTOTRONIC Programmer allows users to
– Configurable LED module parameters
program custom light engine parameters into the driver.
— Programming does not require powering up or connecting
This system offers the freedom to adjust light preferences for the power supply to AC line voltage
Human Centric Lighting (HCL) applications including
— Input voltage: Universal
educational, commercial office and healthcare settings.
120-277Vac 50/60Hz
The OSRAM Tunable White Solutions is compatible with the — UL Class 2 output for safe operation
following controls:
Configurable features
End of Life Thermal Dimmable
NTC
Protection
<1% On
7
Tunable White LED Driver and Casambi Bluetooth® Controller | Product data
Ordering Information
Item Ordering Total Output Output Current Default Output Voltage Dimming Dimming LED Thermal
Number Abbreviation Power Range Current Range (Vdc) Control Range Protection
50W (per channel 400-1400mA 400mA 20-48V DALI
58287 OTi50W/120-277/1A4/2CH TW L 1%-100% Yes
and combined) (Programmable) per channel or DEXAL
Please reference OPTOTRONIC® Tunable White Programmable LED Driver Specification Sheet for complete technical details on
this product.
Dimensions
1.0 (25.4)
HEIGHT
— Driver will respond to DALI Type 6 commands when programmed mode is default 2-Channel Mode
System configuration
For small application spaces, the driver can be used in This is because each DEXAL driver feeds 60mA into the
DEXAL mode, which will provide power to the DALI bus DALI bus and as per the DALI standard, DALI bus current
and the wallstation. However, the number of drivers that cannot exceed 250mA.
can be controlled with a single wallstation is four.
~L CH1/WW+
OSRAM GND
CH1/WW- GND
OPTOTRONIC® TW CH2/CW+ PRG/NTC
120-277VAC CH2/CW-
~N 2-CH LED Driver
DALI
Wallstation Scene 2
Custom
(optional): On/Off
Brightness
Color DA1 DA2 DA1 DA2
8
Tunable White Driver | Programming
Step 1: To enable Tunable White mode on the driver, Step 2: Select the OSRAM LED board NAED code from
Select Enable TW in the OT Programmer. the drop down list.
Step 3: Enter the Max Lumens and Number of LED Step 4: Click “Program” button to start programming the
Boards needed for the luminaire. The program will driver. A new window “Auto Programming” prompts with
automatically calculate the appropriate current level the status of programming. If the LED driver is already
based on the lumen value entered. connected, a window message prompts “LED driver is
programmed successfully”. If the LED driver is not
connected, a window message prompts “Waiting for
LED driver”.
9
Tunable White Driver | Programming
10
Casambi Bluetooth ® DALI Controller | Product features
Reference type:
Item code:
Casambi controller features
— Manual color temperature change
Date:
— Color temperature scenes based on user interface
— Time of day Notes:
— Sensor input
— Circadian lighting
.80"
1.59" (20.2mm)
Specifications and Certifications (40.4mm) *Tc point is on bottom side
Description
Wire info:
Solid and stranded:
16-20 AWG/ 0,5-1,5 mm2
Warning! 1.43" CBU-DCS
Strip length: .25"/6-8 mmis a Bluetooth controllable, Casambi enable
Hazardous voltages. Risk of
(36.3mm)
electric shock or fire. Only qualified controller. It is designed to be used with ANSI C137.4
professionals should make the .72" products, such as Philips Advance Xitanium SR LED d
(18.5mm) .5" .55"
!
connections. Disconnect the
mains power supply and verify OSRAM LED drivers with(114.0mm)
(12.7mm) DEXAL™ technology. CBU-D
its absence prior to installation. not have its own power supply. Instead, it is powered d
.80"
12
Casambi DALI Controller and OPTOTRONIC ® LED Drivers | Startup and comissioning
To get started, download the Casambi app from the Apple iPhone (IOS) or Google Play (Android) store.
Once the app has been downloaded, set the Bluetooth settings to ON. After the system is powered up, the phone can
connect to the Casambi device.
To configure the device for DEXAL Driver features, follow the instructions below:
1. Click More and then Nearby Devices
2. On the list of Nearby Devices, select your device
3. Click on Unpair Device
4. Click on Nearby Devices again and click on the device again
5. Select Change Profile
6. You will see a list of profiles, choose one that matches your application.
7. When finished, click on Nearby Devices again, select your device and follow the onscreen instructions
8. Click on Add to your network
Next, go to the Luminaires screen where you will have four options to control the device
1. A quick press of the icon for your device will toggle the light ON and OFF
2. Drag your finger across the Luminaire icon left to right to change Brightness
3. Press and hold the icon for a menu with slider for Dimmer adjustments
13
Casambi DALI Controller and OPTOTRONIC ® LED Drivers | Startup and comissioning
To get started, download the Casambi app from the Apple iPhone (IOS) or Google Play (Android) store.
Once the app has been downloaded, set the Bluetooth settings to ON. After the system is powered up, the phone can connect
to the Casambi device.
To configure the device for tunable white features, follow the instructions below:
1. Click More and then Nearby Devices
2. On the list of Nearby Devices, select your device
3. Click on Unpair Device
4. Click on Nearby Devices again and click on the device again
5. Select Change Profile
6. You will see a list of profiles with several DT8; select one and follow the onscreen instructions
7. When finished, click on Nearby Devices again, select your device and follow the onscreen instructions
8. Click on Add to your network
Next, go to the Luminaires screen where you will have four options to control the device
1. A quick press of the icon for your device will toggle the light ON and OFF
2. Drag your finger across the Luminaire icon left to right to change Brightness
3. Drag your finger up and down to adjust the Color Temperature
4. Press and hold the icon, for a menu with two sliders for Dimmer and Color Temperature adjustments
14
www.osram.us/ds
ECS-OT444 5-21