Professional Documents
Culture Documents
User Manual: Utility Headlamp
User Manual: Utility Headlamp
Mode A Mode B This warranty card and the purchasing invoice are both considered as the Protectionto fix
Hold press 5s
FL1 STANDARD
1. Battery installation & Replace magnet Flash three times slowly+ Flash three times quickly warrantees.Please confirm that the blank is filled out with relevant information, so please
T1 T2 H1 H2 M1 M2 L1 L2 Insert the battery positive pole toward the light head.,otherwise it will not work. When the reserve them carefully.The completed warranty card should be returned together with the
light turning on,the beam is directed away from the eyes.When take the light with Transfer Mode A / Mode B: warranty item if there is any quality problem on it.
900 490 365 160 70 20 3 0.5
(1700mAh) (3500mAh)
When headlamp is turned off without lockout, hold press side switch 5 seconds,
490 Bankcards(magnetic) or cellphone, should replaced Magnet with rubber pad.
Lighting Solutions for Professionals
2*CR123A 18650
Lumens Lumens Lumens Lumens Lumens Lumens Lumens Lumens light will flash three times faster then flash three times slow.
Peak Beam Change brightness level: Press side switch to L1-M1-H1-T1-L1, cycle. 3 Clicks
Intensity 5300cd (H04R) / 3800cd (H04) Quickly double press switch to Sub-level(i.e. between L1 & L2),turn off memorized. 3 Clicks Address
Quickly triple press switch to Strobe (S1),then double-click to switch S1/S2/S3 mode, Hold press
Waterproof IPX-8 Press switch back to previous brightness level. 1 Click 1 Click Email
M1 M2 H1 H2
MODE B 2 Clicks
3.Location indicator & Lock-out function Adjust flashing levels (low, medium and high) Thanks for purchasing SKILHUNT !
when turn off the flashlight, press switch 1.5 second,location indicator switch on and lock-out Restore to default (The headlamp off means successful restortation)
Edit levels
function activation at same time,the indicator light flash every second.Double click can switch SKILHUNT Electronic Technology Co.,Ltd.
H04 the indicator on/off, Hold press switch 1.5 sec, switch button unlock and enter into low mode.
4. Power indicator & Low voltage indication T2 L2 Hold press 1S
(1700mAh) (3500mAh)
当电筒处于关机未锁键状态,长按开关5秒,电筒先快闪三次,此时不要松手一直按住到慢闪三次模式切换完成。
490
Lighting Solutions for Professionals
2*CR123A 18650
流明 流明 流明 流明 流明 流明 流明 流明 请不要将电筒与银行卡、手机等具有磁性的物品放在一起,可能会有一定影响;
2+210 3.5 5 11 25 75 450
可将磁铁替换为备用橡胶垫片即可。 保修期限 购买之日起两年内 购买日期 年 月 日
/ 快速双击
分钟 小时 小时 小时 小时 小时 小时 2、开关机及档位模式切换: 单击到记忆档位 模式A
1000 500 370 160 70 20 3 0.5 当电筒关机时(未锁键状态),长按开关5秒可在A模式、B模式间相互切换, 商店名称 商店地址
500 主灯闪烁三次后表示模式切换成功,模式切换后关机或断电具有记忆功能。 关机 按住开关0.5秒到低亮
流明 流明 流明 流明 流明 流明 流明 流明
A模式 商店网址 电子邮箱
2+90 1.5 2.5 5 10 35 200 /
分钟 小时 小时 小时 小时 小时 小时
当电筒处于关机状态: 快速三击 按住开关0.5秒
按住开关0.5秒直接进入到低亮档位;单击开关直接进入到记忆亮度档位; 单击开关 顾客姓名 电 话
照射距离 145米 (H04R) / 123米 (H04) 快速双击开关直接进入到极亮档位;快速三击开关直接进入到闪烁模式; 快速双击 L1 L2 T1 T2
当电筒处于开机状态: S1 双击 双击 详细地址
快速三击
中心光强 5300坎德拉 (H04R) / 3800坎德拉 (H04) 单击开关,低亮-中亮-高亮-极亮-低亮,四个亮度档位循环; 快速三击 电子邮箱
亮度档位快速双击主/副档位设置(例如L1/L2档间切换),关机记忆; 长按开关
H04 按住开关1.5秒解锁按键退出定位模式,进入低亮模式。
4、电量指示灯及低压提示: T2 L2 长按开关1秒
思凯特电子科技有限公司
多功能头灯 电量指示:每次开机后,位于开关按键中心的指示灯会点亮5秒显示当前电池电量。
闪四次:>80%;闪三次:50%-80%;闪两次:20%-50%;闪一次:<20%;
H1 自动循环
待编辑
L1
快速三击
保存编辑档位 出厂设置档位
电子邮箱: service@skilhunt.com
L2 M2 H2 T2
低压提示:当电筒点亮时,位于开关按键中心的指示灯具有低压提示。 H2 M2 恢复出厂设置档位 网址: www.skilhunt.com
使用说明 电池安装:请确保电池正确安装,电池装反不能正常工作! 电池电压低于3.0V时,指示灯会间隔2秒慢闪两次;同时主灯间隔30秒快闪提示。
M1
地址: 中国广东省深圳市