Professional Documents
Culture Documents
TP For Vrochure
TP For Vrochure
in this technology, one strip and one pipe are used. the strip ( main conductor ) is placed centrically inside the outerpipe
and space inside the electrode is tightly filled with a cenductive compound mixture (ECC) and then sealed. The crystalline
mixture contains nartural elements and compounds, which are high conductive as anti corrosive
Techno Power
Technical Specifications:
S. No. MODEL NO. Outer Pipe
Domestic, Body earthing,
1. TPB 502 50 x 2000 Electronics devises
Body earthing for drive, PLC &
2. TPB 503 50 X 3000 Automation equipment
Body & Neutral earthing for
3. TPB 802 80 X 2000 industrial equipment
Transformer, Generator,
4 TPB 803 80 X 3000 Lightning anester etc.
4 1
According to NF C 17-102:2011, the standard protec on radius (Rp) is Link to ΔT, the protec on levels I, II, III or IV, ( as
“ Techno Earthing System” - TECHNOLOY:
calculated in EN 62305-2) and the height (h) of Lightning rod above the structure or feature to be protected (defined by NF C
17-102 as a minium 2 m). Techno Powers specializes in “Techno Chemical Earthing System” or “Maintenance Free Earthing System”.Earthing is
Technical Features essential and important for the safety of human lives and equipments. Hence, after consistent research and development
Ÿ Designed and tested according to NFC 17-102/2011 we have developed an efficient and effective earthing technology.
Where h≥5 m, then Rp can be calculated from
Standards
Rp (h) = 2rh - h² + Δ(2r+Δ) Techno Earthing System makes sure safety equipments from voltage surge and transients by arresting damages to highly
Ÿ 100% effec veness in discharge
Where 2 m ≤ h ≤ 5m, then Rp can be calculated from sensitive equipment which can be caused by inadequate grounding performance. Techno Earthing Electrodes are highly
Ÿ 100kA Lightning current durability
secured, stable and reliable in all adverse environmental conditions. It is 100% maintenance free and have a long life
Rp = h x Rp (5) / 5 Ÿ Cer fied under Middle East Technical University, Turkey and expectancy. The existing traditional type of Earthing system needs to be changed every 3 - 4 years and uses salt, coal, etc.
Rp (h) (m) is the protec on radius at a given height h CPRI, Central Power Research Ins tute of the Govt. of India which gets washed away over a period of time but Techno Chemical Earthig
h (m) is the height of the ESEAT p over the horizontal Ÿ ISO 9001-140010 cer fied Chemical Earthing System is completely maintenance free and has a life of more than 20 years.
plane through the furthest point of the object to be Ÿ No use of ba ery or external power source
protected Ÿ 304 L Stainless steel (Inox) design suitable for any Techno Earthing Electrode is an ultra efficient low surge impedance grounding system. It provides the desired low
r (m) 20 m for protec on level I environment condi on maintenance interface with the real earth by continuously conditioning the surrounding soil. It is a corrosion free grounding
Ÿ All models including own mast brackets for grounding system ideal for all types of soil conditions. with strong teams’ support, Techno Chemical Earthing System has been
30 m for protec on level II
Ÿ Suitable for use with a variety of down conductor systems, applied in over 200 projects worldwide.
45 m for protec on level III
60 m for protec on level IV i n c l u d i n g ta p e , C a b l e S m o o t h - we ave , I s o l ate d
Techno Chemical Earthing System meets international standards of Bs - 7430, IEEE - 80, IEEE - 142, UL - 467, IS - 3043
Δ (m) Δ = ΔT x 106 Downconductors (ISODC)
maintenance interface with the real earth by continuously conditioning the surrounding soil. It is a corrosion free grounding
Field experience has proved that Δ is equal to the Ÿ 20 years warranty
system ideal for all types of soil conditions. with strong teams’ support, Techno Chemical Earthing System has been
efficiency obtained during the ESEAT evalua on tests Ÿ Testable by external Topbas® Test Devices applied in over 200 projects worldwide.
Techno Chemical Earthing System meets international standards of BS - 7430,IEEE - 80, UL - 467, IS - 3043
P ro te ctio n P ro te ctio n L e ve l I P ro te ctio n L e ve l II P ro te ctio n L e ve l III P ro te ctio n L e ve l IV
L e ve l (9 9 % , D = 2 0 m ) (9 7 % , D = 3 0 m ) (9 1 % , D = 4 5 m ) (8 4 % , D = 6 0 m )
2 3