Professional Documents
Culture Documents
Multiflo Rf420exhv Spec Sheet
Multiflo Rf420exhv Spec Sheet
Multiflo Rf420exhv Spec Sheet
Features
• Heavy duty, solids handling
dewatering pump
• Close coupled pump assembly
ensuring accurate pump alignment
• Auto vacuum pump priming system
• Built to withstand harsh dewatering
conditions
• Compact heavy duty pump unit
base with inbuilt baffled fuel cell
• Heavy duty engine canopy
• Lift points (4)
• Two-pack epoxy paint system
• Pump shaft fitted with a stainless
steel shaft sleeve
• Comprehensive installation,
operations and spare parts manual
The Multiflo® model 420EXHV bare shaft pump is a heavy duty, solids handling dewatering • Stainless steel, heavy duty
pump capable of producing high volume flow at extra high heads while maintaining high non-return valve
efficiency. • Auto vacuum priming system
The Multiflo RF-420EXHV pump unit provides a wide range of standard inclusions and a
®
• Exhaust system heat shielding
comprehensive selection of optional features to suit your dewatering needs.
• LED flashing amber light
• LED work lights (2)
• Two emergency stops
• Starter motor and battery isolators
• Vented steel battery box with lid
• Low flow protection
• Fuel gauge
• Engine oil drain
Discharge
DN 200mm
5960 2646
Copyright © 2018, Weir Minerals Australia Ltd. All rights reserved. MULTIFLO and HYDRAU-FLO are trademarks and/or registered
trademarks of Weir Minerals Australia Ltd; LINATEX is a trademark and/or registered trademark of Linatex Limited; WEIR and
Weir Minerals WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Ltd. Certain features of the technology
featured in this publication may be protected by pending and granted patents in the name of The Weir Group PLC and/or one of
NOTE: FOR DRAWING, FABRICATION AND ASSEMBLY STANDARDS REFER TO
WEIR MINERALS MULTIFLO ENGINEERING DEPARTMENT STANDARDS AND PROCEDURES.
- - - - -
its subsidiaries. ** CATERPILLAR, CUMMINS and KENSHO
13228.7 kg are not trademarks belonging to any company forming part of The
WELD CAT.
- - MASS:
- - - - FINISH CODE
multiflo@mail.weir -
-
-
-
Weir Group PLC. WMD0696/012018 IFDOINNOT SCALE
DOUBT - ASK
-
-
-
-
-
-
-
- RF-420EX
Copyright © Weir Minerals Australia Ltd. 2017
Weir Minerals Austalia Ltd. ("the Company") is the owner of the copyright and all confidential information in this drawing.
The drawing must not be copied in whole or in part, in any form or by any means, and the information in it must not be
disclosed to any person, or used for any purpose other than the specific purpose for which it has been provided,
without the prior written consent of the Company.
SCALE
DESIGN
1 : 35 U.N.O.
J.A 02.02.16
3rd ANGLE PROJECTION U.N.O.
DRAWING STATUS
A3
WORK IN PROGRESS
www.minerals.weir
®