1. Cutting the steel plate into standard-sized pieces.
2. Assemble the steel piece into H solid steel beam by
using the assembling machine. 3. Weld the H-solid steel beam by using an automatic Arc Submerging welder and correct the welding deformation of the H-solid steel beam by using an H beam reclamation machine. 4. Weld the parts together using carbon dioxide gas arc welding. Using the shot blasting machine, smooth the H-solid steel beam and paint the H-solid steel beam. 5. Using the tie up machine, tied up the H-solid steel beam that has been completed.
6. Deliver the H-solid steel beam to the site from the
factory. 7. Setting up the H-solid steel beam at the site with the help of crane or by using genie lift.
8. Applying and adjusting the acrows between the H-
solid steel beams in the frame structure to prevent unnecessary movement during installation.
9. Using a wood block, determine whether the H-solid
steel beam is perfectly level. 10. Tightening the H-solid steel beams against each other by screwing in the nuts and bolts.
11. Repeat steps 7-10 to continue setting up the whole