Professional Documents
Culture Documents
Ap203h Hospitality Access Point Datasheet en
Ap203h Hospitality Access Point Datasheet en
Alcatel-Lucent OmniAccess
203H Hospitality Access Point
Cost-effective 802.11ac access point for
branch offices and hospitality environments
This cost-effective 802.11ac access point with single or dual radio mode delivers
high performance Wi-Fi networks for hospitality and branch offices, while minimizing
costs for low to moderate density areas.
Desk mount
(primary remote/branch deployment, using
optional desk mount accessory)
RF Management Choose your Deployment • Supported frequency bands (country-
• Adaptive Radio Management (ARM) and Operating Modes specific restrictions apply):
technology automatically assigns channel OmniAccess APs offer a choice of - 2.400 to 2.4835GHz
and power settings, provides airtime deployment and operating modes to meet - 5.150 to 5.250GHz
fairness and ensures that APs stay clear your unique management and deployment - 5.250 to 5.350GHz
of all sources of RF interference to deliver requirements:
reliable, high- performance WL ANs - 5.470 to 5.725GHz
• The 203H AP is the unified AP that
• The 203H can be configured to provide - 5.725 to 5.850GHz
supports both controller-based and
part-time or dedicated air monitoring for controllerless deployment modes, • Available channels: Dependent on
wireless intrusion protection, VPN tunnels providing maximum flexibility configured regulatory domain
to extend remote locations to corporate • Dynamic frequency selection (DFS)
• Controller-based mode: When deployed
resources, and wireless mesh connections optimizes the use of available RF spectrum
in conjunction with an OmniAccess
where Ethernet drops are not available. • Supported radio technologies:
Mobility Controller, OmniAccess APs offer
centralized configuration, data encryption, - 802.11b: Direct-sequence spread-
Security policy enforcement and network services, spectrum (DSSS)
• Integrated wireless intrusion protection as well as distributed and centralized - 802.11a/g/n/ac: Orthogonal frequency-
offers threat protection and mitigation, traffic forwarding. division multiplexing (OFDM)
and eliminates the need for separate RF • Controllerless (Instant) mode: The • Supported modulation types:
sensors and security appliances. controller function is virtualized in a
- 802.11b: BPSK, QPSK, CCK
• IP reputation and security services cluster of APs in Instant mode. As the
network grows and/or requirements - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM,
identify, classify, and block malicious files,
change, Instant deployments can easily 64-QAM, 256-QAM
URLs and IPs, providing comprehensive
protection against advanced online migrate to controller- based mode. • Transmit power: Configurable in
threats. • Remote AP (R AP) mode for branch increments of 0.5 dBm
deployments • Maximum (conducted) transmit power
• Air monitor (AM) for wireless IDS, rogue (limited by local regulatory requirements):
Intelligent app visibility and control
detection and containment - 2.4GHz band: +18 dBm per chain, +21
• AppRF technology leverages deep packet
• Secure enterprise mesh dBm aggregate (2x2 mode)
inspection to classify and block, prioritize
or limit bandwidth for over 2,500 - 5GHz band: +16 dBm per chain, +19
enterprise apps or groups of apps. dBm aggregate (2x2 mode)
203H Access Point - Note: conducted transmit power levels
Quality of service for unified Specifications exclude antenna gain. For total (EIRP)
transmit power, add antenna gain
communication apps • Unified flexible radio 802.11ac 2x2:2SS
• Supports priority handling and policy hospitality and branch AP with internal • Maximum ratio combining (MRC) for
enforcement for unified communication antennas improved receiver performance
apps, including Microsoft Skype for • Supports wall-box and desk mount • Cyclic delay/shift diversity (CDD/CSD) for
Business with encrypted deployments improved downlink RF performance
videoconferencing, voice, chat and • Short guard interval for 20MHz, 40MHz
desktop sharing. and 80MHz channels
Wi-Fi Radio Specifications
• Space-time block coding (STBC) for
• AP type: Indoor, flexible radio:
increased range and improved reception
- 5GHz 802.11ac 2x2 MIMO OR 2.4GHz
• Low-density parity check (LDPC) for high-
802.11n 2x2 MIMO1, or
efficiency error correction and increased
- 5GHz 802.11ac 1x1 AND 2.4GHz throughput
802.11n 1x11
• Transmit beam-forming (TxBF) for increased
• Software-configurable radio supports signal reliability and range (2x2 mode)
5GHz (Radio 0) and/or 2.4GHz (Radio 1)
• Supported data rates (Mbps):
• 5GHz: Two spatial stream Single User
- 802.11b: 1, 2, 5.5, 11
(SU) MIMO for up to 867Mbps wireless
data rate to individual 2x2 VHT80 client - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
devices - 802.11n (2.4GHz): 6.5 to 300 (MCS0 to
• 2.4GHz: Two spatial stream Single User MCS15)
(SU) MIMO for up to 400Mbps wireless - 802.11n (5GHz): 6.5 to 450 (MCS0 to
data rate to individual 2x2 VHT40 client MCS23)
devices (300Mbps for HT40 802.11n client - 802.11ac: 6.5 to 867 (MCS0 to MCS9,
devices) NSS = 1 to 2 for VHT20/40/80)
• Support for up to 32 associated client • 802.11n high-throughput (HT) support:
devices per radio, and up to 8 BSSIDs HT 20/40
per radio • 802.11ac very high throughput (VHT)
support: VHT 20/40/80
• 802.11n/ac packet aggregation: A-MPDU,
A-MSDU
Encrypted throughput
• Maximum IPsec encrypted wired Minimum Software Versions
throughput: 20Mbps • AOS-W: 6.5.2.0/8.2.0.0
• InstantOS: 6.5.3.0/8.2.0.0
Mount Kits
AP-203H-MNT1 Access Point Mount Kit with Spare Single-gang Wall-box Mount Adapter for 203H Series AP
AP-203H-MNTW Access Point Mount Kit with Optional Wall Mount Adapter for 203H Series AP
AP-203H-MNTD Access Point Mount Kit with Optional Desk Mount Adapter for 203H Series AP
Power Accesories
PD-3501G/AC 1-Port IEEE 802.3af PoE Midspan. Port speed 10/100/1000M PoE power 15.4W. No power cord included.
Please order PWR-CORD-XX for country specific power cord
Other Accesories
AP-CBL-SERU Micro-USB TTL3.3V to USB2.0 AP Console Adapter Cable
AP-CBL-ETH10 10-pk Short Ethernet Cable
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other
trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its
affiliates assumes any responsibility for inaccuracies contained herein. (May 2017)