Professional Documents
Culture Documents
YLP-V2-Series 사양서 (E27380 R00)
YLP-V2-Series 사양서 (E27380 R00)
YLP-V2-Series 사양서 (E27380 R00)
YTTERBIUM PULSED
PULSED FIBER LASERS Revision: --
YLP-
YLP-V2 1mJ series Page: 1 of 4
Average output
output power, W Model
10W YLP-V2-1-100-10-10
20W YLP-V2-1-100-20-20
30W YLP-V2-1-100-30-30
50W YLP-V2-1-100-50-50
1. Optical characteristics
N Characteristic Test condi
condition Sym
Symbol Min Typ Max Unit
Unit
1 Mode of operation Pulsed
2 Polarization Random
3 Maximum pulse energy Emax 1 mJ
Nominal average
output power
● YLP-V2-1-100-10-10 9.5 10 11
4 W
● YLP-V2-1-100-20-20 Pnom 19 20 21
● YLP-V2-1-100-30-30 28 30 32
● YLP-V2-1-100-50-50 47 50 53
Output power
5 10 100 %
adjustment range
Nominal pulse repetition rate
● YLP-V2-1-100-10-10 10
6 ● YLP-V2-1-100-20-20 RRnom 20
● YLP-V2-1-100-30-30 30
● YLP-V2-1-100-50-50 50
FWHM
7 Pulse duration Pout= Pnom ∆τ 80 100 120 ns
RR= RRnom
8 Central emission wavelength λ 1055 1064 1075 nm
9 Emission Bandwidth FWHM ∆λ 5 10 nm
Long-term average power in-
10 Pout= Pnom 5 %
stability
Extended
11 Pulse repetition rate 2 200 kHz
PRR mode
12 Laser switching ON/OFF time BS1 mode 2 3 µsec
13 Guide laser power (optional) λ= 660nm 0.3 0.5 1 mW
2. General Characteristics
N Characteristic Min Typ Max Unit
Environment temperature range
14 ● 50 % emission time 0 +42 °C
● 100% emission time 0 +36
15 Storage temperature -10 +60 °C
16 Cooling method 3 built-in fans
Warm-up time
17 ● to start of operation 0.1 min
● to full stabilization 10
18 Humidity (non-condensed environment) 10 95 %
19 Laser module dimensions 215x95x286 mm
3. Electrical Characteristics
N Characteristic Test condi
condition Min Typ Max Unit
20 Supply voltage 23 24 25 VDC
21 Control interface type E
Current consumption
● YLP-V2-1-100-10-10 4
22 ● YLP-V2-1-100-20-20 5 A
● YLP-V2-1-100-30-30 7
● YLP-V2-1-100-50-50 11
6. Certification
Test data shipped with each laser:
1) Nominal output average power, W
2) Pulse repetition rate, kHz
3) Operating wavelength, nm
4) Pulse duration (at RRnom, Pnom), ns
5) Output power instability, %
6) Beam diameter (86% power), mm
7) Laser ON/OFF delays (nominal output power), µs
8) Nominal current consumption, A