Professional Documents
Culture Documents
LED Light Controller User Manual: Package List
LED Light Controller User Manual: Package List
Package list
- LED light controller
- Output lines 8pcs
- LED light red(0.06W) 2pcs
- LED light green(0.06W) 2pcs
- LED light white(0.06W) 1pcs
- LED light white(3W with light cover) 3pcs
+ -
1
(Power/signal input)
s LED light
S + -
Light 2
+
controller V3
Flashing
+
Flash Frequency
+ -
1
Receiver
Light
(Power/signal input)
s Landing gear cabin Light 2
+ sequencer V2 s LED light 0.6W Continuous LED light
S + -
Light 2
+
controller V3
Multi-function Flashing
Flashing
Version 2 + Light 1
Input A + 3W High LED light
+ -
+ -
1
(Retract Channel)
(Power/signal input)
LED light connection, Input A can insert into Light 2
Receiver
Light 2
+
Under this circumstance, the landing gear controller V3
Flashing
channel of radio will control the 3W LED light
Flashing
Note: When all the LED light connected, under working for sustained, the working current is <1A. Before you install the airplane, you should
ensure your ESC to have enough extra current to support LED light controller, If not, it may cause the damage of ESC or electric part.