Professional Documents
Culture Documents
01) Zeroposition Adjust / (Y-Axis / Clamp) : 47,6 MM, Different For Every Machine)
01) Zeroposition Adjust / (Y-Axis / Clamp) : 47,6 MM, Different For Every Machine)
01) Zeroposition Adjust / (Y-Axis / Clamp) : 47,6 MM, Different For Every Machine)
z.B. 47,6 mm
o b) white marks on the belts match with white marks on the machine
frame behind the tooth wheels
o c) the distance between a straight edge, which is put across the three
bolts of the upper toggle bolts, is 0,1 mm (see next picture)
0,1 mm
• [Ù](Mouldfile button:
•
• type in„1815“ and press no. srh (number. search)
• set „Y“ APC and APZ to „0“
•
• Reset with emergency-stop-button until „0,000“ is displayed as position
• set „Y“ APC and APZ to „1“
• Reset with emergency-stop-button
• Enable write protect again