Professional Documents
Culture Documents
Saep 1626
Saep 1626
1 Scope............................................................ 2
2 Conflicts and Deviations................................ 2
3 Applicable Documents................................... 2
4 Responsibilities............................................. 3
5 Instructions.................................................... 3
6 Definitions...................................................... 4
1 Scope
The Configuration and Graphics Guidelines shall provide the design guidelines,
standards, and implementation practices that are to be used for design of the PAS
database configuration.
SAEP-1626 is applicable to all Saudi Aramco Projects that are subject to SAEP-16,
Project Execution Guide for Process Automation Systems. Per SAEP-16, the
Configuration and Graphics Guidelines document is required for the Preliminary Design
Review (PDR) and Critical Design Review (CDR) stages of a project.
2.1 Any conflicts between this Procedure and other applicable Saudi Aramco
Engineering Procedures (SAEPs), Saudi Aramco Engineering Standards
(SAESs), Saudi Aramco Materials System Specifications (SAMSSs), Saudi
Aramco Standard Drawings (SASDs), or industry standards, codes, and forms
shall be resolved in writing by the Company or Buyer Representative through
the Manager, Process & Control Systems Department of Saudi Aramco,
Dhahran.
2.2 Direct all requests to deviate from this Procedure in writing to the Company or
Buyer Representative, who shall follow internal company procedure SAEP-302
and forward such requests to the Manager, Process & Control Systems
Department of Saudi Aramco, Dhahran.
3 Applicable Documents
Page 2 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
4 Responsibilities
Responsibilities include:
a. Ensure that the Guidelines meet the Functional Specification Document
requirements.
b. Ensure that the guidelines meet the requirements of SAES-Z-001.
c. Ensure that the procedures in this SAEP are used to prepare the guidelines.
d. Submit the guidelines for review as part of the Preliminary Design Review
(PDR) documents.
e. Submit the revised guidelines for review as part of the Critical Design
Review (CDR) documents.
f. Review and approve the guidelines submitted for PDR.
g. Review and approve the guidelines submitted for CDR.
Responsibilities include:
a. Review and approve the guidelines submitted for PDR.
b. Review and approve the revised guidelines submitted for CDR.
5 Instructions
5.1 Purpose
The purpose of the Configuration and Graphics Guidelines is to ensure that the
database configuration will conform to standards that will provide consistency in
operation and presentation and will enhance system engineering and
maintainability. The Guidelines shall also ensure that Saudi Aramco's
configuration practices are met and that Vendor's standards are followed as
much as possible.
5.2 Content
Page 3 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
used for configuring I/O, controls, databases, alarms, graphics, reporting and
trending are included.
6 Definitions
6.1 Acronyms
CDR Critical Design Review
DCS Distributed Control System
ESD Emergency Shutdown System
DAHS Data Acquisition and Historization System
NMR Non-Material Requirement
PC Personal Computer
PLC Programmable Logic Controller
PDR Preliminary Design Review
SCADA Supervisory Control and Data Acquisition
CCS Compressor Control System
Revision Summary
25 July 2012 Revised the “Next Planned Update.” Reaffirmed the content of the document, and reissued
with editorial revision to replace Standard’s Primary Contact.
Page 4 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
The guidelines used for the configuration of controllers shall be provided. The controller
guidelines shall include the following:
Page 5 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
1.2.2 Scan rates for control and monitoring points and update method, i.e.,
periodic, by exception (including deadbands), etc.
Page 6 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
1.3.6.5 Transition times for input signals to match setpoints and retries.
Page 7 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
1.5.1 Programming
1.5.4 Alarming.
1.5.8 Documentation.
Guidelines that will be used to configure the operator consoles shall be provided. These
guidelines shall include the following topics:
2.1.4 Analog Value Formats (number of significant digits and decimal places).
Page 8 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
2.1.5.3 Field Edit Time-out - After editing a field begins, the time
allowed to complete edit before the value reverts to its original
value.
2.2.2 User Privilege Levels - Privileges and passwords for all access levels.
Page 9 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
Page 10 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
Page 11 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
Guidelines to be used for configuring faceplate display shall address all features
of the displays including colors, visual and symbolic indications, text, data, and
control modes and set point status.
Page 12 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
Guidelines shall be provided for configuration of databases that are used to interface
with applications that use the system data. These applications may include a host
computer, third party programs, data historian, SOE reporting, or any other application
that uses and/or modifies system data. The guidelines shall cover the following:
4.1.8 Alarms.
Page 13 of 14
Document Responsibility: Process Control Standards Committee SAEP-1626
Issue Date: 25 July 2012
Next Planned Update: 25 July 2017 Configuration and Graphics Guidelines
4.2.1 Snapshots.
Guidelines used to configure the logging software used to produce alarm and status
change logs and operator action logs shall be provided. The guidelines shall include:
5.3 Length of time message files are active after which they are archived.
5.5 Maximum number of message lines to buffer when report destination is not
functioning.
6. Definitions
The Guidelines shall contain a section listing definitions of terms, phrases, and
acronyms used in the document that are subject to interpretation. A simple translation
of an acronym is not sufficient unless the meaning of the translation is obvious.
7. Applicable Documents
This section lists all documents that are referenced within the guidelines.
Page 14 of 14