Professional Documents
Culture Documents
Gyproc MF - 1 Layer Board (Rev 2) - Binder
Gyproc MF - 1 Layer Board (Rev 2) - Binder
Gyproc MF - 1 Layer Board (Rev 2) - Binder
Key Benefits
· Monolithic appearance
· Durable ceiling lining
· Ventilation ducts and other services accommodated in plenum
· Simple accommodation of access panels
· Easy to create bulkheads and level change
· Suitable for wet environments
6 Bulkhead detail - A
7 Bulkhead detail - B
8 Unfixed perimeter detail - A
9 Unfixed perimeter detail - B
10 Shadow angle perimeter detail - A
11 Shadow angle perimeter detail - B
12 Light cove having shallow upstand installed perpendicular with MF5
13 Light cove having shallow upstand installed parallel with MF5
Concrete soffit
Title
Gyproc MF
1 layer Gyproc plasterboard fixed to framing Gypframe MF5 Ceiling Sections at 400mm
with Gyproc Drywall Screws at 230mm centres fixed to MF7 with 2 No. Gyproc
The monolithic metal framing
centres in field of board & 150mm centres at Waferhead Jack-Point Screws gypsum ceiling system
board ends Drawing No Rev
MF/1L/01 2
ISOVER Eco Acoustic Partition Roll where
required
Date Scale @ A4
Gypframe GA1 Angle or 15mm Gyproc Shadow Angle Gypframe MF7 Primary Support Channel at 30.04.20 1:50
fixed to perimeter wall at 600mm centres using 40mm maximum 1200mm centres
Gyproc Hammer Fix into dense solid blockwork or
concrete. Use Gyproc Drywall Screws or Gyproc All dims. are in mm (unless otherwise specified)
Title
Gyproc MF
The monolithic metal framing
Gypframe GA1 Angle fixed to
perimeter wall at 600mm gypsum ceiling system
centres using 40mm Gyproc Drawing No Rev
Hammer Fix into dense solid
blockwork or concrete. Use MF/1L/02 2
Gyproc Drywall Screws or Gyproc Sealant to the perimeter for optimum sound insulation
Gyproc Jack-Point Screws Date Scale @ A4
(subject to metal gauge) for 1 layer Gyproc plasterboard fixed to framing with Gyproc
fixing into a Gyproc partition Drywall Screws at 230mm centres in field of board & 150mm 30.04.20 1:5
ensuring screws pass through centres at board ends
plasterboard lining into All dims. are in mm (unless otherwise specified)
Gypframe stud or fixing
channel. Gypframe MF5 Ceiling Sections at 400mm centres fixed to
MF7 with 2 No. Gyproc Waferhead Jack-Point Screws
Perimeter detail - A
+971 800 GYPROC (497762)
gyproc-me@saint-gobain.com
C 2020 TYPICAL SYSTEM DETAIL - SEE PROJECT SPECIFICATION FOR EXACT REQUIREMENTS (Return to contents) www.gyproc.ae
This drawing is provided to customers free of charge
and is the property of Saint-Gobain Gyproc Middle
East. The details shown are subject to the accuracy of
Gypframe Soffit Cleat fixed to concrete soffit the information provided to Gyproc Middle East at the
time the drawing was originally requested or may
using 40mm Gyproc Wedge Anchor & fixed
alternatively represent a typical/example detail which
to hanger with Gypframe Nut & Bolt
may not reflect the exact site conditions. Gyproc
Middle East can not accept liability in respect of the
details shown, the drawing should therefore be
approved by the project design and management
authority before use to ensure that it meets with their
specific project requirements. It should be read in
conjuction with any associated specification
Gypframe GA1 Angle hangers at maximum documents along with Gyproc Middle East's current
1200mm centres fixed to MF7 with 2 No. literature available at www.gyproc.ae
Maximum 1200mm Gyproc Waferhead Jack-Point Screws
Gypframe MF5 Ceiling Sections at 400mm ISOVER Eco Acoustic Partition Roll where
centres fixed to MF7 with 2 No. Gyproc required
Waferhead Jack-Point Screws
Title
Gyproc MF
The monolithic metal framing
Gypframe GA1 Angle fixed to
perimeter wall at 600mm gypsum ceiling system
centres using 40mm Gyproc Drawing No Rev
Hammer Fix into dense solid
blockwork or concrete. Use MF/1L/03 2
Gyproc Drywall Screws or Gyproc Sealant to the perimeter for optimum
Gyproc Jack-Point Screws sound insulation Date Scale @ A4
(subject to metal gauge) for
fixing into a Gyproc partition 30.04.20 1:5
ensuring screws pass through 1 layer Gyproc plasterboard fixed to framing with Gyproc Gypframe MF7 Primary Support Channel at
plasterboard lining into Drywall Screws at 230mm centres in field of board & 150mm maximum 1200mm centres All dims. are in mm (unless otherwise specified)
Gypframe stud or fixing centres at board ends
channel.
Perimeter detail - B
+971 800 GYPROC (497762)
gyproc-me@saint-gobain.com
C 2020 TYPICAL SYSTEM DETAIL - SEE PROJECT SPECIFICATION FOR EXACT REQUIREMENTS (Return to contents) www.gyproc.ae
This drawing is provided to customers free of charge
and is the property of Saint-Gobain Gyproc Middle
East. The details shown are subject to the accuracy of
the information provided to Gyproc Middle East at the
Gypframe Soffit Cleat fixed to concrete soffit Gypframe GA1 Angle fixed to MF5 with time the drawing was originally requested or may
using 40mm Gyproc Wedge Anchor & fixed Gyproc Waferhead Jack-Point Screws alternatively represent a typical/example detail which
to hanger with Gypframe Nut & Bolt may not reflect the exact site conditions. Gyproc
Middle East can not accept liability in respect of the
details shown, the drawing should therefore be
approved by the project design and management
authority before use to ensure that it meets with their
specific project requirements. It should be read in
conjuction with any associated specification
documents along with Gyproc Middle East's current
Gypframe GA1 Angle hangers at maximum literature available at www.gyproc.ae
1200mm centres fixed to MF7 with 2 No.
Maximum 150
Gyproc Waferhead Jack-Point Screws
Maximum 1500
Channel at maximum 1200mm Title
centres
Gyproc MF
The monolithic metal framing
1 layer Gyproc plasterboard fixed to framing with Gyproc gypsum ceiling system
Drywall Screws at 300mm centres (200mm centres at Drawing No Rev
external angles)
MF/1L/04 2
Date Scale @ A4
30.04.20 1:5
Gypframe GA1 Angle fixed to MF5 with Gyproc Waferhead
Jack-Point Screws
All dims. are in mm (unless otherwise specified)
Gypframe MF5 Ceiling Sections at 400mm 1 layer Gyproc plasterboard fixed to framing with Gyproc
centres fixed to MF7 with 2No. Gyproc Drywall Screws at 230mm centres in field of board &
Waferhead Jack-Point Screws 150mm centres at board ends
Maximum 300
Gypframe GA1 Angle hangers at maximum
1200mm centres fixed to MF7 with 2 No.
Gyproc Waferhead Jack-Point Screws
Maximum 1000
Title
Gyproc MF
The monolithic metal framing
1 layer Gyproc plasterboard fixed to framing with Gyproc gypsum ceiling system
Drywall Screws at 300mm centres (200mm centres at Drawing No Rev
external angles)
MF/1L/05 2
Date Scale @ A4
Gypframe MF5 Ceiling Sections at 400mm 1 layer Gyproc plasterboard fixed to framing with Gyproc
centres fixed to MF7 with 2 No. Gyproc Drywall Screws at 230mm centres in field of board &
Waferhead Jack-Point Screws 150mm centres at board ends
Maximum 1500
Maximum 150
Bulkhead detail - A
+971 800 GYPROC (497762)
gyproc-me@saint-gobain.com
C 2020 TYPICAL SYSTEM DETAIL - SEE PROJECT SPECIFICATION FOR EXACT REQUIREMENTS (Return to contents) www.gyproc.ae
This drawing is provided to customers free of charge
and is the property of Saint-Gobain Gyproc Middle
East. The details shown are subject to the accuracy of
Gyproc Sealant to the perimeter for optimum
the information provided to Gyproc Middle East at the
Gypframe Steel sound insulation
time the drawing was originally requested or may
Angle or timber
Gypframe GA1 Angle fixed to concrete soffit alternatively represent a typical/example detail which
batten suitably fixed
using 40mm Gyproc Wedge Anchor may not reflect the exact site conditions. Gyproc
to soffit to support Middle East can not accept liability in respect of the
insulation Gypframe MF5 Ceiling Sections at maximum details shown, the drawing should therefore be
Gypframe Soffit Cleat fixed to
600mm centres fixed to MF7 with 2 No. approved by the project design and management
concrete soffit using 40mm
Gyproc Waferhead Jack-Point Screws authority before use to ensure that it meets with their
Gyproc Wedge Anchor & fixed to
specific project requirements. It should be read in
hanger with Gypframe Nut & Bolt
conjuction with any associated specification
1 layer Gyproc plasterboard fixed to framing documents along with Gyproc Middle East's current
ISOVER Eco Acoustic Partition Roll with Gyproc Drywall Screws at 300mm literature available at www.gyproc.ae
where required centres (200mm centres at external angles)
Maximum 7000mm
1200mm centres fixed to MF7 with bulkhead exceeds length of MF7 (i.e.
Minimum 200mm
2 No. Gyproc Waferhead 3000mm) channels to be overlapped by a
Jack-Point Screws minimum of 200mm and fixed with 3 No.
Gyproc Waferhead Jack-Point Screws
Gyproc MF
The monolithic metal framing
gypsum ceiling system
Drawing No Rev
MF/1L/07 2
Date Scale @ A4
Gypframe MF7 Primary Support Channels
fixed back to back at intersection with 2 No. 30.04.20 1:5
Gyproc Waferhead Jack-Point Screws
All dims. are in mm (unless otherwise specified)
Bulkhead detail - B
+971 800 GYPROC (497762)
gyproc-me@saint-gobain.com
C 2020 TYPICAL SYSTEM DETAIL - SEE PROJECT SPECIFICATION FOR EXACT REQUIREMENTS (Return to contents) www.gyproc.ae
This drawing is provided to customers free of charge
and is the property of Saint-Gobain Gyproc Middle
East. The details shown are subject to the accuracy of
the information provided to Gyproc Middle East at the
Gypframe Soffit Cleat fixed to concrete soffit time the drawing was originally requested or may
using 40mm Gyproc Wedge Anchor & fixed alternatively represent a typical/example detail which
to hanger with Gypframe Nut & Bolt may not reflect the exact site conditions. Gyproc
Middle East can not accept liability in respect of the
details shown, the drawing should therefore be
approved by the project design and management
authority before use to ensure that it meets with their
specific project requirements. It should be read in
conjuction with any associated specification
documents along with Gyproc Middle East's current
Gypframe GA1 Angle hangers at maximum literature available at www.gyproc.ae
1200mm centres fixed to MF7 with 2 No.
Gyproc Waferhead Jack-Point Screws
30.04.20 1:5
Gypframe MF7 Primary Support Channel at 1 layer Gyproc plasterboard fixed to framing All dims. are in mm (unless otherwise specified)
maximum 1200mm centres with Gyproc Drywall Screws at 230mm
centres in field of board & 150mm centres at
Gypframe MF5 Ceiling Sections at 400mm centres fixed to MF7 board ends
with 2 No. Gyproc Waferhead Jack-Point Screws
Gyproc MF
The monolithic metal framing
gypsum ceiling system
Drawing No Rev
Gyproc Drywall Metal
Edge Bead MF/1L/09 2
Date Scale @ A4
Additional Gypframe MF5 Ceiling
Section at perimeter fixed to each
Gypframe MF7 Primary Support Channel at 30.04.20 1:5
maximum 1200mm centres
MF7 with 2 No. Gyproc Waferhead
Jack-Point Screws All dims. are in mm (unless otherwise specified)
Gypframe MF5 Ceiling Sections at 400mm 1 layer Gyproc plasterboard fixed to framing
centres fixed to MF7 with 2 No. Gyproc with Gyproc Drywall Screws at 230mm
Waferhead Jack-Point Screws centres in field of board & 150mm centres at
board ends
Title
Gyproc MF
The monolithic metal framing
15mm Gyproc Shadow Angle gypsum ceiling system
fixed to perimeter wall at
Drawing No Rev
600mm centres using 40mm
15
Gyproc Hammer Fix into MF/1L/10 0
dense solid blockwork or
concrete. Use Gyproc Drywall
Date Scale @ A4
Screws or Gyproc Jack-Point
1 layer 12.5mm Gyproc plasterboard fixed to framing with
Screws (subject to metal
Gyproc Drywall Screws at 230mm centres in field of board & 30.04.20 1:5
gauge) for fixing into a
150mm centres at board ends
Gyproc partition ensuring
screws pass through All dims. are in mm (unless otherwise specified)
plasterboard lining into Gypframe MF5 Ceiling Sections at 400mm centres fixed to
Gypframe stud or fixing MF7 with 2 No. Gyproc Waferhead Jack-Point Screws
channel.
Gypframe MF5 Ceiling Sections at 400mm ISOVER Eco Acoustic Partition Roll where
centres fixed to MF7 with 2 No. Gyproc required
Waferhead Jack-Point Screws
Title
Gyproc MF
The monolithic metal framing
15mm Gyproc Shadow Angle
fixed to perimeter wall at
gypsum ceiling system
600mm centres using 40mm Drawing No Rev
Gyproc Hammer Fix into 15
dense solid blockwork or
MF/1L/11 0
concrete. Use Gyproc Drywall
Screws or Gyproc Jack-Point Date Scale @ A4
Screws (subject to metal
gauge) for fixing into a
30.04.20 1:5
Gyproc partition ensuring 1 layer 12.5mm Gyproc plasterboard fixed to framing with Gypframe MF7 Primary Support Channel at
screws pass through Gyproc Drywall Screws at 230mm centres in field of board & maximum 1200mm centres All dims. are in mm (unless otherwise specified)
plasterboard lining into 150mm centres at board ends
Gypframe stud or fixing
channel.
Maximum 1500
Gypframe MF5 Ceiling Sections at
400mm centres fixed to MF7 with 2 No. Title
Gyproc Waferhead Jack-Point Screws
Gyproc MF
The monolithic metal framing
Gypframe MF7 Primary Support Channel
Indicative of plywood strip between gypsum ceiling system
at maximum 1200mm centres
Gypframe MF7 Primary Support Channels
Drawing No Rev
fixed to top of Gypframe MF5's to receive
fixing of light fitting MF/1L/12 0
85 Gypframe GA1 Angle fixed to Plywood Date Scale @ A4
strip at maximum 300mm centres
30.04.20 1:5
Gypframe GA1 Angle fixed to Gypframe All dims. are in mm (unless otherwise specified)
Maximum 150
Cantilever of MF5 MF5 Ceiling Sections with Gyproc
Waferhead Jack-Point Screws
1 layer Gyproc plasterboard fixed to framing with
Gyproc Drywall Screws at 230mm centres in field of
Gypframe GA1 Angle fixed to MF5 with
board & 150mm centres at board ends
Gyproc Waferhead Jack-Point Screws
Maximum 1000
to MF7 with 2 No. Gyproc Channels to receive fixing of light
Waferhead Jack-Point Screws fitting
Title
Gypframe MF7 Primary Support
Channels at maximum 1200mm
centres fixed together with 2 No.
Gyproc MF
Gyproc Waferhead Jack-Point The monolithic metal framing
Screws Gypframe GA1 Angle fixed to gypsum ceiling system
Gypframe MF7 Primary Support
Channels with Gyproc Waferhead Drawing No Rev
Jack-Point Screws
MF/1L/13 0
Date Scale @ A4
85
30.04.20 1:5
Gypframe MF5 Ceiling Sections at 400mm centres fixed Gypframe GA1 Angle to receive All dims. are in mm (unless otherwise specified)
to MF7 with 2 No. Gyproc Waferhead Jack-Point Screws Gyproc Drywall Screws for fixing
Maximum 150 ends of Gyproc plasterboard
1 layer Gyproc plasterboard fixed to framing with Gyproc Drywall Screws
at 230mm centres in field of board & 150mm centres at board ends Additional Gypframe MF5 Ceiling
Sections to receive plywood strip
m
0m
30
Title
Isometric Section
Gyproc MF
The monolithic metal framing
gypsum ceiling system
m
0m Drawing No Rev
30 Gypframe MF5 sections closely butted
together with a further short (minimum
MF/1L/14 0
300mm) section of Gypframe MF5 nested
centrally over the joint and fixed using 2 Date Scale @ A4
No. Waferhead Jack-Point Screws to each
flange (8 screws in total) to reinforce the
30.04.20 1:5
splice.
All dims. are in mm (unless otherwise specified)
150mm
m
m
0
30
m
m
0
15
m
m
0
Title
15
MF/1L/15 0
Date Scale @ A4
30.04.20 1:5
12.5
18
stamped Gyproc
Minimum
50
Maximum 150 588 (Internal usable aperture)
Title
800
Denotes standard products, all other products are available Frame is electrostatic powder coated in white. Door face can be overpainted
as non-standard sizes and are subject to extended lead on site if required
times. Bespoke sizes are available upon request.
Weights are approximate Cable and hook safety mechanism not shown
Title
Minimum Maximum 300mm
18mm
12.5mm
50mm
Plasterboard screw fixed at 230mm 1 layer Gyproc plasterboard fixed to
Gyproc MF
centres in access panel hidden frame framing with Gyproc Drywall Screws at The monolithic metal framing
Dimensions Weight kg* Door material 230mm centres in field of board &
150mm centres at board ends gypsum ceiling system
L W Moisture resistant gypsum board face
Drawing No Rev
300* 300* 2.0 Gypsum board
400 400 3.1 Gypsum board
MF/1L/17 0
450* 450* 3.6 Gypsum board Date Scale @ A4
600* 600* 5.9 Gypsum board Material: 30.04.20 1:5
600 900 9.1 Gypsum board 1.8mm Extruded aluminium frame and moisture resistant gypsum board door
600 1200 14.0 Gypsum board All dims. are in mm (unless otherwise specified)
Finish:
Denotes standard products, all other products are available as Frame is electrostatic powder coated in white. Door face can
non-standard sizes and are subject to extended lead times. be overpainted on site if required
Bespoke sizes are available upon request.
Cable and hook safety mechanism not shown
Weights are approximate