Arthur Hermle - 2016-07-11 LL ID 50961156

###########################################################

Generic instructions for following NX installers:

XRDI (X-ray device interface)

CDI (Canon Detector Interface)
TRI (Trixell) DR Detector software
VRN (Varian) DR detector software
VDI (Vieworks Detector Interface) DR detector software
SDL (Sedecal) generator software
SMS (Siemens) generator software
SPM (Spellman) generator software
APC (Agfa Positioner Control) software

This software is either installed on NX or on the service PC for the Offline

Configuration Tool.

For instructions to install on NX, refer to the NX Service Manual, chapter 7,

Upgrade Installation.
For instructions to install in the Offline Configuration Tool refer to the NX
Service Manual, chapter 5, Software Options - Offline Config. Tool.
For compatibility information refer to the Simplified ELMS DR Subproduct
Interoperability Matrix, Document ID 35878296