Professional Documents
Culture Documents
Epomaker K870T Manual
Epomaker K870T Manual
0
Ajazz K870T
Extended Manual
1
Epomaker Ajazz K870T Extended Manual Version 1.0
Table of Contents
Introduction 3
Comments by Epomaker 3
Warranty Information 3
Where To Buy 3
Unboxing 4
What’s Included in the box 4
Keyboard Specifications 4
Keycap Dimensions 5
Key Combinations 5
Mac Keys 5
Windows Keys 6
System Switching 6
Backlight Settings 6
Extra Shortcuts 7
Quick Startup 8
Indicator Information 8
Charging Information 8
Bluetooth Preface 8
Wired Mode 8
Wireless Mode 8
Bluetooth Connection 9
Windows 10 Bluetooth 9
iOS Bluetooth Setup 11
MacOS Bluetooth 14
2
Epomaker Ajazz K870T Extended Manual Version 1.0
Introduction
Comments by Epomaker
If you think any part of this manual needs correction, adjustment or updating, send
the team a message at support@epomaker.com . You can also send a message
there if you have any issues with your keyboard.
Warranty Information
Epomaker’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur from
normal wear and tear. If your product is defective we will send you a replacement
unit. Replacement units might require you to send the defective unit back to
Epomaker.
We provide a 1 year warranty for our products when bought from our website
(Epomaker.com). Your item will not be covered by your 1 year warranty if the
inspection shows any sign of modification or changes unsupported by the original
product, these include: Changing internal components, Assembling and
reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our stores, you do not have a
warranty with us if you bought the item from another reseller or likewise. You are
required to contact them to resolve issues.
Where To Buy
Website
http://epomaker.com/
Amazon US
https://www.amazon.com/s?me=A31XCF3C216O31&marketplaceID=ATVPDKIKX0DER
Amazon UK
https://www.amazon.co.uk/s?k=EPOMAKER
Amazon DE
https://www.amazon.de/s?k=EPOMAKER
Aliexpress
https://www.aliexpress.com/store/5877346
3
Epomaker Ajazz K870T Extended Manual Version 1.0
Unboxing
Keyboard Specifications
4
Epomaker Ajazz K870T Extended Manual Version 1.0
Keycap Dimensions
The “units” of a keycap refer to a comparison between a one “unit” standard key.
This is such that a 2u key will be two units of a 1u key.
Key Combinations
Mac Keys
F1 Decrease Screen Brightness
F8 Play/Pause
F10 Mute
F11 Volume -
F12 Volume +
5
Epomaker Ajazz K870T Extended Manual Version 1.0
Windows Keys
FN + F5 Previous Song
FN + F9 My Computer
FN + F10 Calculator
FN + F11 Homepage
Fn + F12 Search
System Switching
FN + S Windows Mode
FN + A Mac Mode
Backlight Settings
FN + INS Always On/Single On/Single Off
FN + 2 LOL Lights*
FN + 3 Office Lights*
6
Epomaker Ajazz K870T Extended Manual Version 1.0
FN + + Light Speed +
FN + - Light Speed -
* Lights Can Be Edited
Extra Shortcuts
FN + WIN Lock Windows Key
7
Epomaker Ajazz K870T Extended Manual Version 1.0
Quick Startup
Indicator Information
Caps Lock Indicator - Blue = On
Charging Indicator - Red = Charging
Connection Mode - Off = Wired, On = Bluetooth
Wheel Function - Off = Volume, Backlight Brightness = On
Charging Information
If the battery is low on the keyboard, the FN key will flash to to indicate that the
keyboard requires a charge. When the keyboard is charging, you should see the
charging indicator, which will be red. When the keyboard is fully charged, this
indicator will turn off.
Bluetooth Preface
Wired Mode
Disable the Connection mode to off. Connect the USB-A to USB-C cable. You will see
the animation of the lights turning off indicating the keyboard is connected. You do
not have to turn on the switch at the back of the keyboard to use wired.
Wireless Mode
Make sure the switch at the back is turned to “On” and the Connection Mode
indicator is On, and should be a Blue color. The keyboard is then ready to be paired.
8
Epomaker Ajazz K870T Extended Manual Version 1.0
Bluetooth Connection
Windows 10 Bluetooth
1. First, charge the keyboard via a USB port on your computer until it has decent
charge. You should see the Red light turn off on the indicator when it is full.
2. Make sure the switch at the back is turned to “On” and the Connection Mode
indicator is On, and should be a Blue color. The keyboard is then ready to be
paired.
3. First Press F
N + P, It will flash a white colour indicating pairing mode.
4. Press the windows key, and type “Bluetooth” into the search.
5. Select “Bluetooth and other device settings”
9
Epomaker Ajazz K870T Extended Manual Version 1.0
6. Select “Add Bluetooth or other device”
7. Select “Bluetooth” from the add devices section. Make sure your “P” key is still
flashing. If it stops flashing, it means your device will not be seen in the
Bluetooth list and you will need to press it again so it can be paired to.
10
Epomaker Ajazz K870T Extended Manual Version 1.0
8. Select the “Key” From the device selection, it might also appear as “Ajazz
K870T Keyboard”.
9. Assign the device to a key. You can assign up to three devices using FN + Q,
FN + W, or F
N + E.
Your device will then be paired on that specific button. To disconnect/reconnect the
keyboard, press the same button until the button turns white.
11
Epomaker Ajazz K870T Extended Manual Version 1.0
4. Select “Bluetooth” from the Settings. Make sure it is on. Make sure that your
device is considered discoverable.
5. Assign the device to a key. You can assign up to three devices using FN + Q,
FN + W, or F
N + E.
6. Press “AJAZZ K870T Keyboard” to connect to your Epomaker Ajazz K870T.
When your keyboard is connected to your iPhone, it should show as “Connected”.
You should be able to type on it normally.
12
Epomaker Ajazz K870T Extended Manual Version 1.0
Note: If you want to disconnect the device, you can press the information icon on the
side, and then select “Disconnect” or “Forget this device”. Your device will then be
paired on that specific button. To disconnect/reconnect the keyboard, press the
same button until the button turns white.
13
Epomaker Ajazz K870T Extended Manual Version 1.0
MacOS Bluetooth
Note: make sure your device is discoverable and turned on.
1. Press Command + Space to open Search
2. Type “Bluetooth” into the Spacebar, select “Bluetooth” (Don’t select Bluetooth
File Exchange).
3. First, charge the keyboard via a USB port on your computer until it has decent
charge. You should see the Red light turn off on the indicator when it is full.
4. Make sure the switch at the back is turned to “On” and the Connection Mode
indicator is On, and should be a Blue color. The keyboard is then ready to be
paired.
5. First Press F
N + P, It will flash a white colour indicating pairing mode.
14
Epomaker Ajazz K870T Extended Manual Version 1.0
6. You should see “Ajazz K870T Keyboard” in the Bluetooth devices.
Assign the device to a key. You can assign up to three devices using FN + Q,
FN + W, or F
N+Ew hen it connects to the device.
7. Press “Connect” to connect to the keyboard.
15
Epomaker Ajazz K870T Extended Manual Version 1.0
8. You should see a keyboard symbol that is connected. The mac keyboard
assistant dialogue might pop up. Follow through the instructions and the
keyboard should register input properly.
Backlight Creation
We can assign different colours to the three presets on the lighting. We can change
the lighting within FN + 1, FN + 2, and FN + 3.
1. Press the recording key by holding F N + ~. This will allow for you to assign
lighting to different keys.
2. Press any key you would like lit up, and press it multiple times to change the
colors, and you can press it a few times and it will turn the light off.
3. Press the key you want to save your custom backlighting to. You can place it
in either FN + 1, FN + 2, or FN + 3.
4. You can then change the colours using F N + Left Arrow if you dislike the
colors you picked and want a static color.
16
Epomaker Ajazz K870T Extended Manual Version 1.0
1. Download the file RAKK Lam-Ang Tuner
2. Extract the File using 7Zip (https://www.7-zip.org/) or Winrar.
3. Run through the installer until it installs the software. Make sure your
keyboard is connected in wired mode or it will not detect the device.
17
Epomaker Ajazz K870T Extended Manual Version 1.0
4. Search for the “RAKK Lam-Ang” software and launch the application.
18
Epomaker Ajazz K870T Extended Manual Version 1.0
2. Select your preset, you can also make user defined ones, if your keyboard is
connected, then you will see it change to your desired lighting. You can also
select your colour, or “Full Color”, which is Rainbow Mode.
19
Epomaker Ajazz K870T Extended Manual Version 1.0
1. Go to the customize section, select one of the keys you would like to adjust
2. Select the keyboard option to reassign to a keyboard key. You can also use
this to assign keys, combo keys, etc. Reminder, this is not official software.
Some features might not work.
3. Assign the key you would like into the menu, and then click “Ok” to save it to
your keyboard.
20
Epomaker Ajazz K870T Extended Manual Version 1.0
1. Head to the Macro section of the software, you should see the section
which can be used to record and save the macros.
2. Enter the name you would like to use for the macro, and then press the
“New” button.
21
Epomaker Ajazz K870T Extended Manual Version 1.0
3. Click “Start Record” and then begin typing, you will see on the right
panel it will record your key presses.
4. When you are done, click “Stop Recording, and “Apply”.
22