Professional Documents
Culture Documents
Metala: Nter Ise
Metala: Nter Ise
II
,,~•1"1"1•~,, The Image of Perfection Since 1980 Q Shed No.: 25-26, NIIanth Avenue,
i@
metalaB metalab@metalab.co.in
@ Website: www.metalab.co.in
«
• [ii] @nterrise
Off. Mobile ; 90992 24444, 88661 12121
88668 12121, 99250 12121
Testing Facllltles : • Metals 8 Its Alloy : Spectro, Tensile, Bend, Impact, Hardness, Strand Wire, Metallography, Corrosion Test, HIC, SSC, CSC, IGC, Coating Thk., UT, DPT, MPT &8 RT.
• In-situ Spectro & Metallography Analysis, Onsite Hardness & Thickness Measurement. • Preparation of WPS / PQR / WPQ as per Welding Standard (API, AWS, ASME, EN 8
1SO)
• Rubber, Plastic, Paint 8 Its related Test • Bullding Materials : Cement, Aggregate, Sand, Water, Brick, AAC & Paver Block, Mix Design, Static & Dynamic Pile Load Test, NDT Test of Concrete
TEST REPORT
Submitted To :Nektor Engineers & Project Consultants
......-..-.........-..-....-........... .......
;
- Certificate
.....Test ........ ....
No :ME/VK15/24
···- ·•- .. . ......
B-104, Si icon Valley, Shivranjani Cross Road, Satellite, Ahmedabad, Date of Certificate lssue:20/11/202
....... .....%
I
! Date o Sample lnward:15/11/202.
Letter Ref:Dt.13/11/2021
C on d it io n o f S a m pl e/Loc a
..-..... . ... .. . . . .. .. . . . . .
tion:Satisfactory
Sample Details: ( 12.7 mm 7-Py HTS Strand Wire , Make : TATA, Coil No.: X71798, Material : IS 14268:2017 Class-II.
Work Detail: Jaykay Central Cement Ltd, Panna, MP.
.....•
Submited Size: Approx 1.5 mtr Long. Test No. A
- $
r"
@g
aB
-
a,,,.,{.<' k,
,sgE
K,
@(
l!l
...,,.,
* A'ba * 1(61221100027090
%-
.°
While providing statement of conto rtainty is not taken into con siderati on & No any Addition s / Devi ation s / Excl usio ns has been taken from Test
Method .
gOTEST ++
Note ; Sample (S) not drawn by METALAB ENTERPRISE ; . The Report is only refers to particulars sample(s) tested. • Reproduced test report must be verified by the user with original test report. • The
Sample (S) will be disoosed off within 15 days unless request is given • The Results reported in this report are not meant for public arbitration or as an evidence in legal dispute. • This Test report shall not be
reproduced except in full, without written approval from us. prior to testing. • Client has to specified the material specification before testing. • Any Complaints about this Test report should be communicateo in writing within
7 Days of issue of this report.
'
II
The Image of Perfection Since 1980
age
Q Shed No,: 25-26, Nilanth Avenue,
5
=55' NABL-ISO/IEC 17025 Accredited 8 Govt. Approved Testing B/h. Palm Hotel, Viratnagar Cross
Laboratory S. P. Ring Road, Odhav, Ahmedabad-382415. (Guj.)
E-mail: metalabgujarat@gmail.com
re~qlag'
metalab@metalab.co.in
@ Website : www.metalab.co.in
«. Off. Mobile : 90992 24444, 88661 12121
TEST REPORT
Submitted To :Nektor Engineers & Project Consultants
B-104, Silicon Valley, Shivranjani Cross Road, Satellite, Ahmedabad,
···-·--··-1· ........ -
Test Certificate No :ME/VK15/25
i Date o f Sample
-·
Inward:15/11/2021
Letter Ref:Dt.13/11/2021 Condition of Sample/Location:Satisfactory
.................. ··-
Sample Details: ( 12.7 mm 7-Ply HTS Strand Wire , Make : TATA, Coil No.: X71890, Material : IS 14268:2017 Class-II.
Work Detail: Jaykay Central Cement Ltd, Panna, MP.
Submited Size: Approx 1.5 mtr Long. Test No. A
77
(z(gas,f) 1
·•2··-te"'li
3
<
Ashok Sha
. * A'ba * ao sowor
2
.y.
!'bad
While providing statement of conform certainty isunont taken into consideration & No any Addition s / Deviations / Exclusions has been taken from Test Meth6
i,ty +· ND TEST +
Note ; Sample (S) not drawn by METALAB ENTERPRISE ;. The Report is only refers to particulars sample(s) tested. • Reproduced test report must be verified by the ser with original test report. • The
Sample (S will be dlsposed off within 15 days unless request Is glven • The Results reported In this report are not meant for public arbitratlon or as an evidence in legal dispute, • This Test report shall not be
reproduced except in full without written approval from us. prior to testing. • Client has to specifled the materlal specification before testing. • Any Complaints about tnis Test report should be communicated in
writing within 7 Days of issue of this report
IL
The Image of Perfection Since 1980 Shed No.; 25-26, Nilkanth Avenue,
5 @el
' NABL-ISO/IEC 17025 Accredited & Govt. Approved Testing Laboratory B/h. Palm Hotel, Viratnagar Cross
S. P. Ring Road, Odhav, Ahmed&bad-382415. (Guj.)
metal.ag'
E-mail: metalabgujarat@gmail.com
metalab@metalab.co.in
@ Website : www.metalab.co.in
I
TEST REPORT
Submitted To :Nekto r E ngi nee rs & Project Consultants Test Certificate No :ME/VK15/26
. . . . .. ...
B-104, Silicon Valley, Shivranjani Cross Road, Satellite, Ahmedabad, j Date of Certificate issue:20/11/2021
Sr. No (mm) AREA (mm2) Nominal Diameter (mm) 12.55 13.36 12.75
1 4.26 14.25 Weight (kg) - • 1.176
2 4.25 14.18 Length (mm) • - 1514
3 4.26 14.25 Unit Weight (kg/m) 0.775 - 0.777
4 4.25 14.18 Nominal Area (mm) 98.70 - 100.33
5 4.26 14.25 Core Wire Higher then Outer Wire (%) 1.5 - 2.82
6 4.25 14.18 Lay Length (mm) 152 203 186.00
7 4.38 15.06 Load @ 1% Extension (kN) 165.30 • 173.38
Total Area of Strand 100.35 Breaking Load (kN) 183.70 - 198.81
Extension % Load (KN] Modulus of Elasticity (kN/mm) 185 205 193.35
0.10 18.72 Initial Gauge Length-L1 (mm) - - 736
0.20 39.76 Gauge Length at 1% Extention-L2 (mm) . - 760
0.30 59.06 Gauge Length at Breaking Length-L3 (mm) .. • 799
0.40 78.96 Elongation % 3.5 - 6.30
0.50 99.12 Chemical Anlysis
0.60 117.26 Parameter Min Value Max Value Result/Observation
0.70 134.62 Carbon % - • 0.781
0.80 150.12 Silicon% • .. 0.245
0.90 164.26 Mangenese % - - 0.815
1.00 173.38 Sulphur % . 0.040 0.009
Phosphorus % . 0.040 0.010
Result: Confirm as per above reference standard in respect of above results.
-
s»9g«e 5a.5
[('I..; oRIc:AL.).].. aausl
~
7(»)ho
I
-~
a --
r. ~
on
'8 fF -l
+ A'pad
' i fhr
on oooros»
\ e ¥
5
While providing statement of
conformity, • ·- not taken into consideration & No anv Additions/ Deviations / Exclusions has been taken from]; ~ad
•• END TEST
Note ; Sample (S) not drawn by METALAB ENTERPRISE ; · The Report ls only refers to particulars sample(s) tested. • Reproduced test report must be verified by the user with original test report. • The
Sample (S) wIll be disposed off within 15 days unless request is glven • The Results reported in this report are not meant for public arbitration or as an evidence in legal dispute, + This Test report shall not be
reproduced except in full, without written approval from us. prior to testing, • Client has to specified the material specification before testing. • Any Complaints about this Test report should be communicated in
writing within 7 Days of issue ot this report.
II
The Image of Perfection Since 1980 Shed Nol; 25-26, NIIkanth Avenue,
#han
=5°' NABL-ISO/IEC 17025 Accredited & Govt. Approved Testing B/h. Palm Hotel, Viratnagar Cross
Laboratory S. P. RIng Road, Odhav, Ahmedabad-382415. (Gu].)
E-mall: metalabgularat@gmall.com
regal.ag'
metalab@metalab.co.ln
@ Website: ivww.metalab.co.in
« Off. Mobile : 90992 24444 , 88661 12121
Enterprise
Testing Facilities : • Metals 8 Its Alloy ; Spectro, Tensile, Bend, Impact, Hardness, Strand Wire, Metallography, Corrosion Test, HIC, SSC, CSC, IGC, Coating Thk,, UT, DPT,
88668 12121, 99250 12121
MPT &8 T.
• In-situ Spectro & Metallography Analysis, Onsite Hardness & Thickness Measurement. • Preparation of WPS / PQR / WPQ as per Welding Standard (API, AWS, ASME,
EN & ISO)
• Rubber, Plastic, Pint 6 Its related Test • Bullding Materials : Cement, Aggregate, Sand, Water, Brick, AAC & Paver Block, Mix Design, Static & Dynamic Pile Load Test, NDT Test of
Concrete.
TEST REPORT
S u bm itt ed To :Ne kt or Eng in eer s& P roj ect Co ns ult ant s
1 - - - - - - - - - - - - -Te-s t - - - - - -
Certificate No :ME/VK15/26
---------------.---------·-
B-104, Silicon Valley, Shivranjani Cross Road, Satellite, Ahmedabad,
·· !
·.. .
Date of Certificate Issue:20/11/2021
!-------·-· ..····..·-· · _.._ - .
} D a t e o f Sample inward:15/11/2021
1---------------· --------------------' '-------- · ·· - · -·
l e tte r R ef: Dt .13 /1 1/2 02 1 Condition of
1Sample/Location:Satisfactor
- - - - - - y - - - - --------------------------------
..
Sample Details: 12.7 mm 7-Ply HTS Strand Wire, Make : TATA, Coil No.: X71810, Material : IS 14268:2017 Class-II.
Work Detail: Jaykay Central Cement Ltd, Panna, MP.
Submited Size: Approx 1.5 mtr Long. Test No. A
Sr. No (mm) AREA (mm2) Nominal Diameter (mm) 12.55 13.36 12.75
1 4.26 14.25 Weight (kg) - - 1.176
2 4.25 14.18 Length (mm) - - 1514
3 4.26 14.25 Unit Weight (kg/m) 0.775 - 0.777
4 4.25 14.18 Nominal Area (mm') 98.70 - 100.33
5 4.26 14.25 Core Wire Higher then Outer Wire (%) 1.5 - 2.82
6 4.25 14.18 Lay Length (mm) 152 203 186.00
7 4.38 15.06 Load @ 1% Extension (kN) 165.30 - 173.38
Total Area of Strand 100.35 Breaking Load (kN) 183.70 - 198.81
Extension % Load (KN] Modulus of Elasticity (kN/mm) 185 205 193.35
0.10 18.72 Initial Gauge Length-L1 (mm) - - 736
0.20 39.76 Gauge Length at 1% Extention-L2 (mm) - . 760
0.30 59.06 Gauge Length at Breaking Length-L3 (mm) - - 799
0.40 78.96 Elongation % 3.5 - 6.30
0.50 99.12 Chemic
al Anlysis
0.60 117.26 Parameter Min Value Max Value Result/Observation
0.70 134.62 Carbon % .. - 0.781
0.80 150.12 Silicon % - ·- 0.245
0.90 164.26 Mangenese % .. - 0.815
1.00 173.38 Sulphur % . 0.040 0.009
Phosphorus % . 0.040 0.010
Result: Confirm as per above reference standard in respect of above results.
-
ose,.,.,. . _..$i-e ]l
B %o
'I,..; ........ ~ -~_,,,.. ".,.,;..
f) " a • ~[R3..•
<' '5
% ti al
(z( 'it not taken into
I.a ... taken from
has been T~
considerati ;%
- on & No any AdditJons / Dn,aDons / Elcclusions
While providing statement of conformity,
-·
~ad
gNDIEr
Note : Sample (S) not drawn by METALAB ENTERPRISE ; · The Report Is only refers to particulars sample(s) tested. • Reproduced test report must be verified by the user with original test report. • The
.
Sample (S) will be disposed off within 15 days unless request is glven • The Results reported in this report are not meant for public arbitration or as an evidence in legal dispute. • This Test report shall not be
reproduced except in full, without written approval from us. prior to testing. • Client has to specified the material specification before testing, • Any Complaints about this Test report should be communicate in
writing within 7 Days of issue of this report.