Professional Documents
Culture Documents
Peerless Pump Brochures and Flyers - 8196
Peerless Pump Brochures and Flyers - 8196
Peerless Pump Brochures and Flyers - 8196
efficiency, maximum performance, and extended mean time • Chemical and petrochemical
• Pulp and paper
between failures (MTBF) for reduced maintenance cost.
• Plastics
• Refining
FEATURES • Pharmaceutical
The 8196 casing is a self-venting, top centerline The power end has a bearing frame made
discharge with a fully confined gasket. Class of heavy-duty cast-iron (ductile iron on STP
150 lb. FF flanges are standard, with optional frame sizes) construction. It is designed with SPECIFICATIONS
Class 150 lb. RF and both FF and RF Class 300 an enlarged oil reservoir for better dissipation
Capacities Up to 4,500 gpm (1,022 m3/h)
lb. flanges available. All ductile iron and 316SS of heat and bullseye sight glass for easy
casings are supplied with casing drains. monitoring of oil levels. The bearing frame is Head Up to 730 feet (222 meters)
coated internally to ensure zero contamination
Pressure Up to 375 psi (2,586 kPa)
An optional Casing Wear Extender™ is of the oil or bearings from inside.
available on 3x4-13 and 4x6-13 MTP frame sizes Horsepower Up to 300 hp (224 kW)
and on all XLTP frame sizes. The Wear Extender The VBXD® labyrinth oil seal by Inpro,
Temperature Up to 500°F (260°C)
can be provided in wear-resistant materials, designed especially for Peerless Pump, provides
such as CD4MCu. both static and dynamic sealing using contact Drives Motors, engines, steam turbines
technology to positively seal the bearings from Liquids Chemical, pulp and paper,
The impeller is a fully open design that environmental contamination. all process
significantly reduces clogging. Integral back
pump-out vanes reduce stuffing box pressure, All bearing frames also include pre-drilled Materials Ductile iron, 316SS, CD4MCuN
prolonging mechanical seal life. The impeller and bosses for vibration-monitoring and / or
casing are matched to achieve high efficiency and temperature-monitoring devices.
low NPSH. Sealed by an O-ring, the threaded area
is protected against corrosion. All impellers are Bearing fits are precision-bored, and all
available in an optional keyed and bolted design. bearings meet or exceed the minimum ANSI
L10 life of 17,500 hours.
A low-flow impeller is available for select sizes
of STP frame pumps. This low-flow impeller The shaft is available with sleeve or in solid
helps extend MTBF for those applications shaft construction.
operating far to the left of the best efficiency
point (BEP) of the standard pump. All power ends are backed by a
three-year warranty.
8196 SERIES RANGE — 1750 RPM 8196 SERIES RANGE — 3550 RPM
FLOW (M³/H) FLOW (M³/H)
3.44 68 10 20 40 60 801002 00 4006 00 1000 2.34 61 02 04 06 01 00 2004 00 600
1000 300
HEAD (Meters)
HEAD (Meters)
HEAD (Feet)
HEAD (Feet)
100 30 200 60
60 20 40
100 30
40
10 70 20
7 50
20 40
5 10
30
10 3 20 6
8
6 2 4
5 1.5 10 3
15 20 40 60 100 200 4006 00 1000 2000 3000 4000 10 20 40 60 1002 00 4006 00 1000 2000
FLOW (GPM) FLOW (GPM)
Peerless Pump designs tough, versatile products to meet your pumping needs. The 8196 Series delivers
variety, durability, standardized options and configurations unequalled in the industry.