Professional Documents
Culture Documents
019 Euler Equations
019 Euler Equations
2. For generalized coordinates, we will use the Euler’s angles with one point
of the rigid body being fixed (no translation, just rotation)
1 1
T ω I ω i I ij j
2 2
4. Choose the body axes to coincide with the Principal axes, then
1
T I iii2 ( no sum; I ij is diagonalized! )
2
3
5. A general rotation (an inf. one here) dΩ along a given axis in the body frame
can be decomposed into three rotations along the Euler’s angles. Similarly, the
time rate of change of this rotation ω dΩ dt can also be written as,
(we write this as a sum since the
ω ω ω ω
angular changes are infinitesimal)
- These three different pieces correspond to the time rate of change of the
individual rotations along each of the three Euler’s angles.
4
0 sin sin
Note: Since 0, 0,
T
is
ω
body BCD 0 cos sin already in the ẑ
cos 0 0
direction,
D 0 0
5
cos
T
Note: Since , 0, 0 is
ω body BC 0 sin already in the x̂
0 0 direction,
C 0 0
0 0
6
0
In the ', ', ' axes, we have ω
' 0
To express it in the body axes, we apply the Euler rotations B
These are the components of ω expressed in the “body” frame using the
Euler’s angles.
8
(Note: Here and onward, space frame is primed and body frame is unprimed.)
9
Without further assuming the nature of the applied forces acting on this
system, we will use the following general form of the E-L equation:
d T
I 3 3
dt
11
T
I11 2 I 22 1 0 I112 I 221
12
Since the Euler angle is associated with a rotation about the ẑ axis in the
“body” frame, we have,
ri ẑ
Q Fi Fi zˆ ri ri
i i
zˆ N N 3 ri ri
used
A B C B C A ri ri sin
ri
zˆ ri
13
d T T
Q
dt
- One can calculate the E-L equation for , but (they are ugly) we are not
doing them here !
- There is a smarter way to get EOM for the other two dofs…
I 3 3 I1 I 2 12 N 3
In principle, one can get out the 2 and 3 equation by solving for 2 and 3
simultaneously from the , Euler-Lagrange equations.
These are called the Euler’s Equations and the motion is described in terms of
the Principal Moments !
15
dL dL
N ωL
dt fixed dt body
Writing this vector equation out in the components of the body axes,
dLi
Ni ijk j Lk
dt
Choose the body axes to coincide with the Principal axes, so that
d
Ni Ii i ijk j I k k (no sum)
dt
16
The Euler’s Equations describes motion in the body frame. ω and N are
vectors expressed in the body frame.
17
I11 I 2 I 3 23 dL
ω L
I 2 2 I 3 I1 31 or dt body
I 3 3 I1 I 2 12 0 L Iω
ω L
I 2 I3 I1 I 3
1 23 23
I1 I1 Note: I1 I 2
I 3 I1 I 3 I1
2 31 31
I2 I1
19
1 2
2 1
Taking the derivative of the top equation and substitute the bottom on
the right, we have,
x2 I 3 I1
x1 3 const
I1
(This is called the “body” cone)
21
Observations:
1
T
1. Energy is conserved in this problem so that rot ω L const
2
2. The situation is torque free so that L is fixed in space.
#1 and #2 means that ω must also precesses around L in the fixed frame
x3 ' - Assume L lies along the x3 ' axis in the fixed frame.
L ω
- L is a constant vector
- The dot product ω L must remain constant.
L 2 xˆ 1 1xˆ 2 2 L xˆ 1 1 L xˆ 2
Since the body axes are chosen to lie along the principal axes, we have
L ω xˆ 3 2 I11 1 I 22 0
ω xˆ 3 ω
x̂3 L ω xˆ 3 0 (for a symmetric top with
L
or without torque)
http://demonstrations.wolfram.com/Angu
Summary: larMomentumOfARotatingRigidBody/
Precession Rate
I 3 I1
3
I1
Case 1: I1 I 3 Case 2: I1 I 3
25
Again, we have chosen the body axes to align with the principal axes.
ω 1xˆ 1 t xˆ 2 t xˆ 3
Assume small perturbations and drops higher order terms ( ), the first
equation gives,
1 0 1 const
27
I 3 I1
1 0
I2
I1 I 2
1 0
I3
Taking the derivative of the top equation and substitute the bottom into it,
I 3 I1 I 3 I1 I1 I 2
1 1 1
I2 I2 I3
I 3 I1 I1 I 2 2
1
I2 I3
28
2
I1 I 3 I1 I 2 2
0
I 2 I3
1 (Note: we have switch the order
t Aeit Be it
and t A ' eit B ' e it where A, B, A’, & B’ depends on ICs
However, a similar analysis will show that the oscillatory motion for the
perturbations will become exponential if we consider rotation near the x2
axis.
Summary:
Without any applied torque, motion around the principle axes
with the largest and the smallest principal moments are stable
while motion around the intermediate axis is unstable.
http://www.youtube.com/watch?v=XALe27bnUm8