SUPER BRAND
WITH SUPER PROTECTION
AGAINST CORROSION -
TATA TISCON CRSD
‘CORROSION -THE DEVIL
within
Corosion ithe most
deadly enemy of concrete
structures, Wherever there
Ishumity,corosion sets
in steadlly and destroys
slowly, attacking houses,
bridges, dams, industrial
plants and just about any
fonstriction that has used
concrete reinforced with
steel The peril of coresion
{sdetrimental to the inner
strength of any concrete
‘TATATISCON cRSO -THE
CORROSION FIGHTER
TATATiscon CRSO keeps
cotrsion a bay and
protects the lie of your
Structures TATA Tiscon’s
Corrosion Resistant Super
Ductile Rebars(CRSD) are
best suited to resist both
‘corrosion ane damages
‘caused by earthquakes The
TATATiscon CRSD with
Fe 00D properties fights
salinity in the ai, sea-water,
groundwater moisture and
acid particles inthe ait.
Ordinary rebars on the
other hand have a shorter
Me span.
TATATISCON cRSD~
AVAILABILITY
he unique protective
chemist of CRSD rebars
rot only ress corrosion
butalso prolong thelife
of concrete structures.
“TATATison CRSD FeS00D
(grade ofS 1786:2000)
rebars ae available in the
following sizes:
mn, 10mm, TZ,
mm, 20mm, 22mm,
25mm, 28mm, 32mm,
55mm, omen
TATA TISCON CRSD
odededed
TATA
TISCON
JOY OF BUILDING
TATATISCON cRSD-
ADVANTAGES
Longerlfe
High yeld strength
coupled with superior
ductility and bendablity
No extra operations
required during
fabrication
Easy to weld
Can be bent and rezent
Using a very small
mancrelBENEFITS OF CRSD OVER EPOXY & CPCC
The various differences between TATA TISCON CRSD, CPCC and Epoxy Coated Rebar are listed below.
Corrosion Resistance Enhanced inherent External coating that External coating that
Technology Immunity with spectal behaves more lke ablanket behaves more lke a
alloying addition cover blanket cover/plant
Surface preparation Not required Surface cleaning efficiency Not required
isa critical factor
Coating holiday effect No coating holiday effect Detection andelimination Pits and discontinuities in
due to inherent corrosion ofall coating holidays under _ the epoxy film can lead to
resistance suspicion. Pts and accelarated corrosion at the
discontinuities can lead to uncoated ste
severe pitting and corrosion
atthe uncoated site
Bond strength with Betterbond strength with Bond strength may not be Lesser bond strength
concrete concrete high due to external coating compared to CRS due to
external coating
No special cares required Coating gets damaged Notadvisable for welding
Welding during welding as coating gets damaged
during welding
Normal practice as Chances ofcrackingilaking Chances ofcackingy/Mlaking
conventional rebar ‘of cating while cutting. of coating while cutting
Special tools needed for
cutting to avoid damage in
the vicinity of cut end
Fabrication (cutting)
No protection required at Exposed cutend doesnot Exposed cut end do not
bear cut end due to have any coating from have any coating
Inherent immunity where corrosion can initiate from where corrosion can
Bending Normal practice just asfor Therearechances ofthe __Thereisa chance that the
conventional rebar coating getting removed coating may get disbonded
during bending. Bending to during bending if quality of
becompletedpriortocoating coating isnot proper
Handling No special handling Extensive specialhandling Special handling required
required required on-site to avoid coating
damages
Finalinspection and repair Not required ‘Quality controlis difficult. Inspection on-site
on-site Finalinspection is required recommended to detect
torepairallthe visible and repairallthe visible
damages. Labourintensive coating damages,
and needs close monitoring
Usage oftie wie couplers Uncoated te wite/couplers Pre-coated tiewire/couplers Pre-coated tie
canbe used on-site tobe used wire/couplers to be used
uu
ay
AN sal
Tata Stee! Limited, Tata Centre, 43, awaharlal Nehru Road, Kolkata 700 071, India
Phone: +91 33 2288 7051, 2288 9251 Fax'+91 33 2288 1640