a Doors installation and reversing system: Check operation AP72.00-B-7250B.

fm 1

AP72.00-B-7250B.fm Doors installation and reversing system: Check operation 12.01.2001

CHASSIS 364.301/ 302/ 304/ 311; 664.025

1 Switch opens and closes the front door
2 Switch opens and closes both doors
3 Switch opens and closes the rear door
4 Emergency valve
5 Locks

B72.00-0007-01 B72.00-0008-01

6 Button

B72.00-0009-01
a Doors installation and reversing system: Check operation AP72.00-B-7250B.fm 2

1 Run engine until service pressure in com- Maintain this pressure during the door
pressed air brake system is reached. operation check.

BE42.20-B-1002-01A

Check doors opening and closing

i On vehicles O 371 UP with center door, open-

ing and closing check is done with switch (2).
This switch also controls, simultaneously the
exit door, which can be the front or the rear
door, depending upon execution. With the
door open, the warning light on the dashboard
should remain lit.

Check doors emergency operation

2 Check each door emergency operation indi-

vidually.

3 Press locks (5) simultaneously and open

doors actuating mechanism compartment
cover.

4 With the door shut, pull emergency valve but-

ton (4). In this position, the compressed air
circuit remains depressurized and the door
can be opened and shut manually.

5 Reposition again the emergency valve button

to the inside (operation position).

Check front doors external control

a Doors installation and reversing system: Check operation AP72.00-B-7250B.fm 3

6 Press switch (1) and shut front door. Open

porthole in the center of front bumper and
press button (6); the door should open.

7 Press button (6) again and the door should

close.

Parking brake

Number Denomination Vehicle 364, 382, 384,

386, 388, 397, 660, 664,
682, 688, 693, 694, 695,
696

BE42.20-B-1002-01A Service pressure bar 8