Professional Documents
Culture Documents
SVT200 - Toilet Tank Sink 132022
SVT200 - Toilet Tank Sink 132022
SVT200 - Toilet Tank Sink 132022
SPECIFICATIONS
| 25½" |
INSTALLATION
|
STEP 1
Install the parts inside the tank:
32¼"
Flush Volume Slider
Fill Valve
Water Inlet Bolt
Tank to Bowl Bolts
| 7" |
Tank to Bowl Gasket
Note:
|
Observe correct flush volume
LEFT VIEW slider to sink drain position.
(see diagram 1.0)
| 15" | TANK
STEP 2
Assemble the ceramic sink/lid: Dgm 1.0 - CORRECT
INSTALLATION OF FLUSH
Faucet VOLUME SLIDER
Water Hose
Sink Drain
Dual Push Button
Note:
To avoid leaks, make sure all
necessary gaskets are
TOP VIEW properly installed.
CERAMIC SINK
ACCESSORIES
1 STEP 3
Complete the Installation:
2 Faucet Bolts
Control Box
5
3 Faucet Hose
Water Supply Valve
8
6 (Angle Valve)
FAUCET HOSE CONNECTION
Note:
7 All plastic bolts,
screws and valves are
4 hand tight only.
8 Do not overtight
when using wrench or
screw driver
ANGLE VALVE
1 Ceramic Faucet 5 Ceramic Lid (Cover)
2 Dual Push Button 6 Sink Drain
3 Convert Box 7 Ceramic Tank Please feel free to reach out to our Customer Care Center with any questions you may have; our email
4 Water Fill Valve / Float Valve 8
Flush Volume Slider address is support@silentvenus.com and our Customer Care's direct line is (800) 972 8597.
For a more detailed guide please check our help section on the web at http://www.silentvenus.com.