Professional Documents
Culture Documents
Owner'S Manual: Read This Manual Carefully Before Operating This Vehicle
Owner'S Manual: Read This Manual Carefully Before Operating This Vehicle
OWNER’S MANUAL
LNR125
B21-F8199-E2
EAU46094
Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
Introduction
EAU10114
WARNING
Please read this manual carefully and completely before operating this scooter.
A NOTICE indicates special precautions that must be taken to avoid damage to the
NOTICE vehicle or other property.
EAUN0430
LNR125
OWNER’S MANUAL
©2017 PT Yamaha Indonesia Motor
Manufacturing
1st edition, July 2017
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
PT Yamaha Indonesia Motor Manufac-
turing
is expressly prohibited.
Printed in Indonesia.
Table of contents
Location of important labels........... 1-1 For your safety – pre-operation Cast wheels .................................. 7-19
checks ...............................................5-1 Checking the brake lever
Safety information............................ 2-1 free play..................................... 7-19
Further safe-riding points ............... 2-5 Operation and important riding Adjusting the rear brake lever
Helmets .......................................... 2-6 points .................................................6-1 free play..................................... 7-19
Starting the engine..........................6-1 Checking the front brake pads
Description ....................................... 3-1 Acceleration and deceleration ........6-2 and rear brake shoes ............... 7-20
Left view ......................................... 3-1 Braking............................................6-2 Checking the brake fluid level ...... 7-21
Right view....................................... 3-2 Engine break-in ...............................6-3 Changing the brake fluid ............. 7-21
Controls and instruments ............... 3-3 Parking ............................................6-3 Checking the V-belt ...................... 7-22
Checking and lubricating the
Instrument and control functions... 4-1 Periodic maintenance and cables........................................ 7-22
Remote control unit ....................... 4-1 adjustment ........................................7-1 Checking and lubricating the
Main switch/steering lock............... 4-3 Owner’s tool kit ...............................7-1 throttle grip and cable ............... 7-22
Keyhole shutter .............................. 4-4 Periodic maintenance chart for the Lubricating the front and rear
Indicator lights and warning light ... 4-5 emission control system..............7-2 brake levers............................... 7-23
Speedometer unit........................... 4-6 General maintenance and Checking and lubricating the
Handlebar switches........................ 4-6 lubrication chart...........................7-3 centerstand and sidestand........ 7-23
Front brake lever ............................ 4-7 Removing and installing the Checking the front fork................. 7-24
Rear brake lever ............................. 4-7 cowling and panels......................7-8 Checking the steering................... 7-25
Rear brake lever lock...................... 4-7 Checking the spark plug .................7-9 Checking the wheel bearings ....... 7-25
Fuel tank cap .................................. 4-8 Engine oil and oil strainer..............7-11 Battery .......................................... 7-25
Fuel................................................. 4-9 Final transmission oil.....................7-13 Replacing the fuse........................ 7-27
Catalytic converter ....................... 4-10 Air filter and V-belt case air filter Headlight ...................................... 7-27
Kickstarter .................................... 4-11 elements ....................................7-14 Replacing an auxiliary light bulb... 7-28
Seat .............................................. 4-11 Checking the engine idling Replacing a front turn signal
Helmet holders ............................. 4-12 speed.........................................7-16 light bulb.................................... 7-28
Convenience hook........................ 4-12 Adjusting the throttle grip Replacing a tail/brake light bulb
Storage compartment .................. 4-13 free play .....................................7-16 or a rear turn signal light bulb ... 7-28
Sidestand ..................................... 4-13 Valve clearance .............................7-17 Troubleshooting............................ 7-29
Ignition circuit cut-off system....... 4-14 Tires ..............................................7-17 Troubleshooting chart .................. 7-31
Table of contents
Scooter care and storage ................8-1
Care .................................................8-1
Storage ............................................8-3
Specifications....................................9-1
Index ................................................11-1
1
Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of
your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement
label is available from your Yamaha dealer.
1 2 3
1-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
200, 29 225, 33
1WD-F1668-01
กรุณาอานคูมือผูใช
รถจักรยานยนตอยางละเอียด
กอนการใชงานรถจักรยานยนต
1-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Safety information
EAU67760
Never operate a motorcycle with- pears to be very effective in reduc-
out proper training or instruction. ing the chance of this type of
Take a training course. Beginners accident.
2 Be a Responsible Owner should receive training from a cer- Therefore:
As the vehicle’s owner, you are re- tified instructor. Contact an autho- • Wear a brightly colored jacket.
sponsible for the safe and proper oper- rized motorcycle dealer to find out • Use extra caution when you are
ation of your motorcycle. about the training courses nearest approaching and passing
Motorcycles are single-track vehicles. you. through intersections, since in-
Their safe use and operation are de- tersections are the most likely
pendent upon the use of proper riding Safe Riding places for motorcycle accidents
techniques as well as the expertise of Perform the pre-operation checks to occur.
the operator. Every operator should each time you use the vehicle to make • Ride where other motorists can
know the following requirements be- sure it is in safe operating condition. see you. Avoid riding in another
fore riding this motorcycle. Failure to inspect or maintain the vehi- motorist’s blind spot.
He or she should: cle properly increases the possibility of • Never maintain a motorcycle
Obtain thorough instructions from an accident or equipment damage. without proper knowledge.
a competent source on all aspects See page 5-1 for a list of pre-operation Contact an authorized motorcy-
of motorcycle operation. checks. cle dealer to inform you on ba-
Observe the warnings and mainte- This motorcycle is designed to sic motorcycle maintenance.
nance requirements in this Own- carry the operator and a passen- Certain maintenance can only
er’s Manual. ger. be carried out by certified staff.
Obtain qualified training in safe The failure of motorists to detect
and proper riding techniques. and recognize motorcycles in traf-
Obtain professional technical ser- fic is the predominating cause of
vice as indicated in this Owner’s automobile/motorcycle accidents.
Manual and/or when made neces- Many accidents have been
sary by mechanical conditions. caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap-
2-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Safety information
Many accidents involve inexperi- • Always signal before turning or Protective Apparel
enced operators. In fact, many op- changing lanes. Make sure that The majority of fatalities from motorcy-
erators who have been involved in other motorists can see you. cle accidents are the result of head in-
accidents do not even have a cur- The posture of the operator and juries. The use of a safety helmet is the 2
rent driver’s license. passenger is important for proper single most critical factor in the pre-
• Make sure that you are qualified control. vention or reduction of head injuries.
and that you only lend your mo- • The operator should keep both Always wear an approved helmet.
torcycle to other qualified oper- hands on the handlebar and Wear a face shield or goggles.
ators. both feet on the operator foot- Wind in your unprotected eyes
• Know your skills and limits. rests during operation to main- could contribute to an impairment
Staying within your limits may tain control of the motorcycle. of vision that could delay seeing a
help you to avoid an accident. • The passenger should always hazard.
• We recommend that you prac- hold onto the operator, the seat The use of a jacket, substantial
tice riding your motorcycle strap or grab bar, if equipped, shoes, trousers, gloves, etc., is ef-
where there is no traffic until you with both hands and keep both fective in preventing or reducing
have become thoroughly famil- feet on the passenger footrests. abrasions or lacerations.
iar with the motorcycle and all of Never carry a passenger unless Never wear loose-fitting clothes,
its controls. he or she can firmly place both otherwise they could catch on the
Many accidents have been feet on the passenger footrests. control levers or wheels and cause
caused by error of the motorcycle Never ride under the influence of injury or an accident.
operator. A typical error made by alcohol or other drugs. Always wear protective clothing
the operator is veering wide on a This motorcycle is designed for that covers your legs, ankles, and
turn due to excessive speed or un- on-road use only. It is not suitable feet. The engine or exhaust sys-
dercornering (insufficient lean an- for off-road use. tem become very hot during or af-
gle for the speed). ter operation and can cause
• Always obey the speed limit and burns.
never travel faster than warrant- A passenger should also observe
ed by road and traffic condi- the above precautions.
tions.
2-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
Safety information
Avoid Carbon Monoxide Poisoning Do not run engine outdoors where When loading within this weight limit,
All engine exhaust contains carbon engine exhaust can be drawn into keep the following in mind:
monoxide, a deadly gas. Breathing a building through openings such Cargo and accessory weight
2 carbon monoxide can cause head- as windows and doors. should be kept as low and close to
aches, dizziness, drowsiness, nausea, the motorcycle as possible. Se-
confusion, and eventually death. Loading curely pack your heaviest items as
Carbon Monoxide is a colorless, odor- Adding accessories or cargo to your close to the center of the vehicle
less, tasteless gas which may be motorcycle can adversely affect stabil- as possible and make sure to dis-
present even if you do not see or smell ity and handling if the weight distribu- tribute the weight as evenly as
any engine exhaust. Deadly levels of tion of the motorcycle is changed. To possible on both sides of the mo-
carbon monoxide can collect rapidly avoid the possibility of an accident, use torcycle to minimize imbalance or
and you can quickly be overcome and extreme caution when adding cargo or instability.
unable to save yourself. Also, deadly accessories to your motorcycle. Use Shifting weights can create a sud-
levels of carbon monoxide can linger extra care when riding a motorcycle den imbalance. Make sure that
for hours or days in enclosed or poorly that has added cargo or accessories. accessories and cargo are se-
ventilated areas. If you experience any Here, along with the information about curely attached to the motorcycle
symptoms of carbon monoxide poi- accessories below, are some general before riding. Check accessory
soning, leave the area immediately, get guidelines to follow if loading cargo to mounts and cargo restraints fre-
fresh air, and SEEK MEDICAL TREAT- your motorcycle: quently.
MENT. The total weight of the operator, pas- • Properly adjust the suspension
Do not run engine indoors. Even if senger, accessories and cargo must for your load (suspension-ad-
you try to ventilate engine exhaust not exceed the maximum load limit. justable models only), and
with fans or open windows and Operation of an overloaded vehicle check the condition and pres-
doors, carbon monoxide can rap- could cause an accident. sure of your tires.
idly reach dangerous levels. • Never attach any large or heavy
Do not run engine in poorly venti- Maximum load: items to the handlebar, front
lated or partially enclosed areas 155 kg (342 lb) fork, or front fender. Such items
such as barns, garages, or car- can create unstable handling or
ports. a slow steering response.
2-3
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM
Safety information
This vehicle is not designed to nize that some aftermarket accesso- namic changes. If accessories
pull a trailer or to be attached to ries or modifications are not suitable are added to the handlebar or
a sidecar. because of potential safety hazards to front fork area, they must be as
you or others. Installing aftermarket lightweight as possible and 2
Genuine Yamaha Accessories products or having other modifications should be kept to a minimum.
Choosing accessories for your vehicle performed to your vehicle that change • Bulky or large accessories may
is an important decision. Genuine any of the vehicle’s design or operation seriously affect the stability of
Yamaha accessories, which are avail- characteristics can put you and others the motorcycle due to aerody-
able only from a Yamaha dealer, have at greater risk of serious injury or namic effects. Wind may at-
been designed, tested, and approved death. You are responsible for injuries tempt to lift the motorcycle, or
by Yamaha for use on your vehicle. related to changes in the vehicle. the motorcycle may become
Many companies with no connection Keep the following guidelines in mind, unstable in cross winds. These
to Yamaha manufacture parts and ac- as well as those provided under “Load- accessories may also cause in-
cessories or offer other modifications ing” when mounting accessories. stability when passing or being
for Yamaha vehicles. Yamaha is not in Never install accessories or carry passed by large vehicles.
a position to test the products that cargo that would impair the per- • Certain accessories can dis-
these aftermarket companies produce. formance of your motorcycle. place the operator from his or
Therefore, Yamaha can neither en- Carefully inspect the accessory her normal riding position. This
dorse nor recommend the use of ac- before using it to make sure that it improper position limits the
cessories not sold by Yamaha or does not in any way reduce freedom of movement of the
modifications not specifically recom- ground clearance or cornering operator and may limit control
mended by Yamaha, even if sold and clearance, limit suspension travel, ability, therefore, such accesso-
installed by a Yamaha dealer. steering travel or control opera- ries are not recommended.
tion, or obscure lights or reflec- Use caution when adding electri-
Aftermarket Parts, Accessories, and tors. cal accessories. If electrical ac-
Modifications • Accessories fitted to the han- cessories exceed the capacity of
While you may find aftermarket prod- dlebar or the front fork area can the motorcycle’s electrical sys-
ucts similar in design and quality to create instability due to improp- tem, an electric failure could re-
genuine Yamaha accessories, recog- er weight distribution or aerody-
2-4
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 5 Wednesday, July 19, 2017 3:56 PM
Safety information
sult, which could cause a per front fork triple clamp (and not, EAU57610
dangerous loss of lights or engine for example, to rubber-mounted Further safe-riding points
power. handlebars or turn signals, or Be sure to signal clearly when
2 parts that could break). Choose making turns.
Aftermarket Tires and Rims the location for the straps carefully Braking can be extremely difficult
The tires and rims that came with your so the straps will not rub against on a wet road. Avoid hard braking,
motorcycle were designed to match painted surfaces during transport. because the motorcycle could
the performance capabilities and to The suspension should be com- slide. Apply the brakes slowly
provide the best combination of han- pressed somewhat by the tie- when stopping on a wet surface.
dling, braking, and comfort. Other downs, if possible, so that the mo- Slow down as you approach a
tires, rims, sizes, and combinations torcycle will not bounce exces- corner or turn. Once you have
may not be appropriate. Refer to page sively during transport. completed a turn, accelerate
7-17 for tire specifications and more in- slowly.
formation on replacing your tires. Be careful when passing parked
cars. A driver might not see you
Transporting the Motorcycle and open a door in your path.
Be sure to observe following instruc- Railroad crossings, streetcar rails,
tions before transporting the motorcy- iron plates on road construction
cle in another vehicle. sites, and manhole covers be-
Remove all loose items from the come extremely slippery when
motorcycle. wet. Slow down and cross them
Point the front wheel straight with caution. Keep the motorcycle
ahead on the trailer or in the truck upright, otherwise it could slide
bed, and choke it in a rail to pre- out from under you.
vent movement. The brake pads or linings could
Secure the motorcycle with tie- get wet when you wash the motor-
downs or suitable straps that are cycle. After washing the motorcy-
attached to solid parts of the mo- cle, check the brakes before
torcycle, such as the frame or up- riding.
2-5
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 6 Wednesday, July 19, 2017 3:56 PM
Safety information
Always wear a helmet, gloves, EAUU0033
Correct usage
trousers (tapered around the cuff Helmets
and ankle so they do not flap), and Operating this vehicle without an ap-
a brightly colored jacket. proved motorcycle helmet increases 2
Do not carry too much luggage on your chances of a severe head injury or
the motorcycle. An overloaded death in the event of an accident. The
motorcycle is unstable. Use a majority of fatalities from motorcycle or
strong cord to secure any luggage scooter accidents are the result of
to the carrier (if equipped). A loose head injuries. The use of a safety hel-
load will affect the stability of the met is the single most critical factor in ZAUU0003
motorcycle and could divert your the prevention or reduction of head in-
juries. Wrong usage
attention from the road. (See page
2-3.)
Always select an approved motorcy-
cle helmet
Pay attention to the following when
choosing a motorcycle helmet.
The helmet must meet the safety
standard “TIS”.
The helmet size must match the
size of the rider’s head. ZAUU0007
Safety information
ZAUU0004 ZAUU0006
ZAUU0005
2-7
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Description
EAU10411
Left view
1 2 3 4 5 6 7
14 13 12 11 10 9
1. Front turn signal light (page 7-28) 9. Final transmission oil drain bolt (page 7-13)
2. Auxiliary light (page 7-28) 10.Kickstarter (page 4-11)
3. Headlight (page 7-27) 11.Engine oil drain bolt B (page 7-11)
4. Battery (page 7-25) 12.Engine oil drain bolt A (page 7-11)
5. Fuse (page 7-27) 13.Sidestand (page 4-13)
6. Convenience hook (page 4-12) 14.V-belt case air filter element (page 7-14)
7. Owner’s tool kit (page 7-1)
8. Air filter element (page 7-14)
3-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Description
EAU10421
Right view
1 2 3 4 5 6
7
1. Rear turn signal light (page 7-28)
2. Tail/brake light (page 7-28)
3. Fuel tank cap (page 4-8)
4. Storage compartment (page 4-13)
5. Main switch/steering lock (page 4-3)
6. Front brake fluid reservoir (page 7-21)
7. Dipstick (page 7-11)
3-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
Description
EAU10431
1 2 3 4 5
3-3
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
4-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
1 4
1 1. Key battery
6. Install the screw.
4. Install a new key battery. NOTICE:
Make sure that the positive (+)
1. Key cover
and negative (-) sides of the bat-
tery are facing in the correct di-
rections. [ECA21240]
Specified battery:
CR1632
4-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
4-3
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM
OPEN
GNITION OPEN
4
SHUT
IGNITION
ZAUU1026 ZAUU0986
From the “LOCK” position, push the Push the “SHUT” lever inward to close
key in and turn it to “OFF”. the keyhole shutter.
4-4
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 5 Wednesday, July 19, 2017 3:56 PM
EAUN0711
EAU11032
Turn signal indicator lights “ ” Eco indicator light “ECO”
and “ ” This indicator light comes on when the
Each indicator light will flash when its vehicle is being operated in an environ-
corresponding turn signal lights are mentally friendly, fuel-efficient manner.
flashing. The indicator light goes off when the
vehicle is stopped.
EAU11081
High beam indicator light “ ” TIP
This indicator light comes on when the Consider the following tips to reduce
high beam of the headlight is switched fuel consumption:
on.
4-5
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 6 Wednesday, July 19, 2017 3:56 PM
1. Start switch “ ”
4-6
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 7 Wednesday, July 19, 2017 3:56 PM
Front brake lever Rear brake lever Rear brake lever lock
This vehicle is equipped with a rear
1 brake lever lock.
1
2 1
4-7
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 8 Wednesday, July 19, 2017 3:56 PM
WARNING 4
1
Never apply the rear brake lever lock 3 2
while the vehicle is moving, other-
wise loss of control or an accident 1. Fuel tank cap 1. Insert the fuel tank cap into the
may result. Make sure that the vehi- 2. Open. tank opening and turn it clockwise
cle is stopped before applying the 3. Close. until the “ ” marks on the cap
rear brake lever lock. and tank are aligned.
To remove the fuel tank cap 2. Close the seat.
EWA11092
1. Open the seat. (See page 4-11.)
2. Turn the fuel tank cap counter- WARNING
clockwise and pull it off. Make sure that the fuel tank cap is
properly closed after filling fuel.
Leaking fuel is a fire hazard.
4-8
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 9 Wednesday, July 19, 2017 3:56 PM
WARNING
EAUU0045
4-10
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 11 Wednesday, July 19, 2017 3:56 PM
IGNITION
TIP
Do not push inward when turning the
key.
3. Fold the seat up.
4-11
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 12 Wednesday, July 19, 2017 3:56 PM
4-12
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 13 Wednesday, July 19, 2017 3:56 PM
4-13
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 14 Wednesday, July 19, 2017 3:56 PM
4-14
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 15 Wednesday, July 19, 2017 3:56 PM
4
• The vehicle must be placed on the center-
Put the sidestand up. stand during this inspection.
• If a malfunction is noted, have a Yamaha
dealer check the system before riding.
Push the start switch while applying
either of the brake levers. The engine will
start.
4-15
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner’s Manual.
EWA11152
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in
this manual, have the vehicle inspected by a Yamaha dealer.
Before using this vehicle, check the following points:
ITEM CHECKS PAGE
5
5-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
5-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
EWA10272
cially the air filter intake, to become WARNING
WARNING wet or submersed. If the engine is Before starting the engine, make
Failure to familiarize yourself with allowed to be submersed in water, sure that the vehicle is placed on the
the controls can lead to loss of con- be sure to remove the water from centerstand.
trol, which could cause an accident the air filter case as soon as possible ECA10251
or injury. to prevent extensive engine dam- NOTICE
age. (See “PERIODIC MAINTE-
See page 6-3 for engine break-in in- 6
NANCE AND ADJUSTMENT” for
structions prior to operating the ve-
details.)
hicle for the first time.
6-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
6-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
6-3
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
7-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
TIP
The annual checks must be performed every year, except if a kilometer-based maintenance is performed in-
stead.
From 20000 km, repeat the maintenance intervals starting from 4000 km.
Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech-
nical skills.
EAUU1294
7-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
7-3
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM
7-4
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 5 Wednesday, July 19, 2017 3:56 PM
• Change.
21 Engine oil • Check oil level and vehicle for oil √ √ √ √ √
leakage.
22 * Engine oil strainer • Clean. √ √
Final transmission • Check vehicle for oil leakage. √ √ Every 8000 km (5000 mi)
23
oil • Change. √ Every 12000 km (7500 mi)
• Check for damage and wear. √ √ √ √
24 * V-belt
• Replace. Every 25000 km (15500 mi)
V-belt secondary
25 * • Lubricate. Every 12000 km (7500 mi)
sheave
7 26 *
Front and rear
• Check operation. √ √ √ √ √ √
brake switches
Moving parts and
27 • Lubricate. √ √ √ √ √
cables
• Check operation.
• Check throttle grip free play, and
28 * Throttle grip √ √ √ √ √
adjust if necessary.
• Lubricate cable and grip housing.
Lights, signals and • Check operation.
29 * √ √ √ √ √ √
switches • Adjust headlight beam.
7-5
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 6 Wednesday, July 19, 2017 3:56 PM
TIP
Air filter
• This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with com-
pressed air to avoid damaging it.
• The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas.
V-belt case air filter
• The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
V-belt
• The V-belt should be checked at the initial 8000 km (5000 mi) and every 4000 km (2500 mi) thereafter. Replace the
V-belt if any damage or wear is found. The V-belt needs to be replaced every 25000 km (16000 mi) even if there is
no wear or damage.
Hydraulic brake service
• Regularly check and, if necessary, correct the brake fluid level. After dissembling the brake master cylinders and cal-
ipers, always change the brake fluid. 7
• Every two years replace the internal components of the brake master cylinder and caliper, and change the brake
fluid.
• Replace the brake hose every four years and if cracked or damaged.
Fuel system service
• Use only unleaded gasoline. The use of leaded gasoline will cause severe damage to internal engine parts, such as
the valves and piston rings, as well as to the exhaust system.
• Replace the fuel filler cover every two years or if cracked or damaged.
• Check the fuel filter if clogged or damaged every 12000 km (7500 mi).
Battery service
• Check the condition and service every 3 months.
• Recharge the battery immediately if the voltage is less than 12.4 V.
• If the battery tends to discharge, replace it immediately.
7-6
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 7 Wednesday, July 19, 2017 3:56 PM
7-7
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 8 Wednesday, July 19, 2017 3:56 PM
7
1. Panel A
2. Screw
7-8
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 9 Wednesday, July 19, 2017 3:56 PM
Place the panel in the original position, Checking the spark plug
and then install the screws. To remove the panel The spark plug is an important engine
1. Open the seat. (See page 4-11.) component, which is easy to check.
Panel B 2. Remove the screws, and then pull Since heat and deposits will cause any
the panel off as shown. spark plug to slowly erode, the spark
To remove the panel plug should be removed and checked
1. Open the seat. (See page 4-11.) in accordance with the periodic main-
2. Remove the screws, and then pull tenance and lubrication chart. In addi-
the panel off as shown. tion, the condition of the spark plug
can reveal the condition of the engine.
2
1 To remove the spark plug
1. Place the vehicle on the center-
stand.
7 1 2. Remove panel B. (See page 7-8.)
1. Screw
3. Remove the spark plug cap.
7-9
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 10 Wednesday, July 19, 2017 3:56 PM
7-10
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 11 Wednesday, July 19, 2017 3:56 PM
7-12
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 13 Wednesday, July 19, 2017 3:56 PM
1
1. Final transmission oil drain bolt
7-13
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 14 Wednesday, July 19, 2017 3:56 PM
7-14
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 15 Wednesday, July 19, 2017 3:56 PM
(b) 2
1
1. Throttle grip free play adjusting nut
2. Locknut
3. Rubber cover
4. Throttle grip free play 7
7-16
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 17 Wednesday, July 19, 2017 3:56 PM
7-18
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 19 Wednesday, July 19, 2017 3:56 PM
Cast wheels Checking the brake lever free Adjusting the rear brake lever
To maximize the performance, durabil- play free play
ity, and safe operation of your vehicle, Measure the rear brake lever free play
note the following points regarding the as shown.
specified wheels.
The wheel rims should be
checked for cracks, bends, warp- 1
age or other damage before each
ride. If any damage is found, have
a Yamaha dealer replace the
wheel. Do not attempt even the
smallest repair to the wheel. A de-
formed or cracked wheel must be There should be no free play at the
replaced. brake lever end. If there is free play,
1. Rear brake lever free play
7 The wheel should be balanced have a Yamaha dealer inspect the
whenever either the tire or wheel brake system.
EWA14212
Rear brake lever free play:
has been changed or replaced. An 15.0–20.0 mm (0.59–0.79 in)
unbalanced wheel can result in WARNING
poor performance, adverse han- A soft or spongy feeling in the brake Periodically check the brake lever free
dling characteristics, and a short- lever can indicate the presence of play and, if necessary, adjust it as fol-
ened tire life. air in the hydraulic system. If there is lows.
air in the hydraulic system, have a To increase the brake lever free play,
Yamaha dealer bleed the system be- turn the adjusting nut at the brake shoe
fore operating the vehicle. Air in the plate in direction (a). To decrease the
hydraulic system will diminish the brake lever free play, turn the adjusting
braking performance, which may re- nut in direction (b).
sult in loss of control and an acci-
dent.
7-19
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 20 Wednesday, July 19, 2017 3:56 PM
1 EAU22432
1
(b) Front brake pads
1. Rear brake lever free play adjusting nut
2
Make sure the rear brake lever lock pin
properly latches and releases after the
brake lever free play is adjusted.
EWA10651
7-20
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 21 Wednesday, July 19, 2017 3:56 PM
Checking the brake fluid level ty brake fluid, otherwise the rub- Changing the brake fluid
ber seals may deteriorate, causing Have a Yamaha dealer change the
leakage and poor braking perfor- brake fluid at the intervals specified in
1 the periodic maintenance and lubrica-
mance.
tion chart. In addition, have the oil seals
Recommended brake fluid: of the brake master cylinder and cali-
YAMAHA GENUINE BRAKE FLUID per as well as the brake hose replaced
or equivalent DOT3 or DOT4 at the intervals listed below or whenev-
er they are damaged or leaking.
Refill with the same type of brake Oil seals: Replace every two
fluid. Mixing fluids may result in a years.
1. Minimum level mark
harmful chemical reaction and Brake hose: Replace every four
Insufficient brake fluid may allow air to lead to poor braking performance. years.
enter the brake system, possibly caus- Be careful that water does not en-
ing it to become ineffective. ter the master cylinder when refill-
7
Before riding, check that the brake fluid ing. Water will significantly lower
is above the minimum level mark and the boiling point of the fluid and
replenish if necessary. A low brake flu- may result in vapor lock.
id level may indicate worn brake pads Brake fluid may deteriorate paint-
and/or brake system leakage. If the ed surfaces or plastic parts. Al-
brake fluid level is low, be sure to ways clean up spilled fluid
check the brake pads for wear and the immediately.
brake system for leakage. As the brake pads wear, it is nor-
Observe these precautions: mal for the brake fluid level to
When checking the fluid level, gradually go down. However, if
make sure that the top of the mas- the brake fluid level goes down
ter cylinder is level by turning the suddenly, have a Yamaha dealer
handlebars. check the cause.
7-21
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 22 Wednesday, July 19, 2017 3:56 PM
Checking the V-belt Checking and lubricating the Checking and lubricating the
The V-belt must be checked and re- cables throttle grip and cable
placed by a Yamaha dealer at the inter- The operation of all control cables and The operation of the throttle grip
vals specified in the periodic the condition of the cables should be should be checked before each ride. In
maintenance and lubrication chart. checked before each ride, and the ca- addition, the cable should be lubricat-
bles and cable ends should be lubri- ed by a Yamaha dealer at the intervals
cated if necessary. If a cable is specified in the periodic maintenance
damaged or does not move smoothly, chart.
have a Yamaha dealer check or re- The throttle cable is equipped with a
place it. WARNING! Damage to the rubber cover. Make sure that the cover
outer housing of cables may result is securely installed. Even though the
in internal rusting and cause inter- cover is installed correctly, it does not
ference with cable movement. Re- completely protect the cable from wa-
place damaged cables as soon as ter entry. Therefore, use care not to
possible to prevent unsafe condi- pour water directly onto the cover or 7
tions. [EWA10712] cable when washing the vehicle. If the
cable or cover becomes dirty, wipe
Recommended lubricant: clean with a moist cloth.
Yamaha cable lubricant or other
suitable cable lubricant
7-22
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 23 Wednesday, July 19, 2017 3:56 PM
Lubricating the front and rear Recommended lubricants: Checking and lubricating the
Front brake lever:
brake levers Silicone grease centerstand and sidestand
The pivoting points of the front and rear Rear brake lever:
brake levers must be lubricated at the Lithium-soap-based grease
intervals specified in the periodic main-
tenance and lubrication chart.
Front brake lever
7-23
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 24 Wednesday, July 19, 2017 3:56 PM
7-24
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 25 Wednesday, July 19, 2017 3:56 PM
WARNING
Electrolyte is poisonous and
dangerous since it contains sul-
furic acid, which causes severe
ZAUU0645
burns. Avoid any contact with
7-25
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 26 Wednesday, July 19, 2017 3:56 PM
7-27
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 28 Wednesday, July 19, 2017 3:56 PM
Replacing an auxiliary light Replacing a front turn signal Replacing a tail/brake light
bulb light bulb bulb or a rear turn signal light
This model is equipped with two auxil- 1. Remove cowling A. (See page bulb
iary lights. If an auxiliary light bulb 7-8.) If a tail/brake light bulb or a rear turn
burns out, replace it as follows. 2. Remove the turn signal light bulb signal light bulb burns out, replace it as
1. Remove cowling A. (See page socket (together with the bulb) by follows.
7-8.) turning it counterclockwise.
2. Remove the auxiliary light socket Tail/brake light bulb
(together with the bulb) by pulling 1. Open the seat. (See page 4-11.)
it out. 2. Remove panel C. (See page 7-8)
3. Remove the bulb socket (together
with the bulb) by turning it coun-
terclockwise and pulling the tail-
1 light bulb socket up at an angle.
7
1
7-30
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 31 Wednesday, July 19, 2017 3:56 PM
Troubleshooting chart
1. Fuel
There is enough fuel. Check the battery.
Check the fuel level in
the fuel tank.
The engine does not start.
There is no fuel. Supply fuel.
Check the battery.
7-31
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
small hidden part of the wind- on all metal, including chrome- WARNING
shield to make sure that it does and nickel-plated, surfaces to pre- Contaminants on the brakes or tires
not leave any marks. If the wind- vent corrosion. can cause loss of control.
shield is scratched, use a quality Make sure that there is no oil or
plastic polishing compound af- After cleaning wax on the brakes or tires. If
ter washing. 1. Dry the motorcycle with a chamois necessary, clean the brake
or an absorbing cloth. discs and brake linings with a
After normal use 2. Use a chrome polish to shine regular brake disc cleaner or
Remove dirt with warm water, a mild chrome, aluminum and stainless- acetone, and wash the tires with
detergent, and a soft, clean sponge, steel parts, including the exhaust warm water and a mild deter-
and then rinse thoroughly with clean system. (Even the thermally in- gent.
water. Use a toothbrush or bottlebrush duced discoloring of stainless- Before operating the vehicle
for hard-to-reach areas. Stubborn dirt steel exhaust systems can be re- test its braking performance
and insects will come off more easily if moved through polishing.) and cornering behavior.
the area is covered with a wet cloth for 3. To prevent corrosion, it is recom- ECAU0022
8-4
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Specifications
Dimensions: Engine oil: Clutch:
Overall length: Type: Clutch type:
1870 mm (73.6 in) YAMALUBE 4-AT or SAE 10W-40 Dry, centrifugal automatic
Overall width: Recommended engine oil grade: Transmission:
685 mm (27.0 in) API service SG type or higher, JASO Primary reduction ratio:
Overall height: standard MB 1.000
1070 mm (42.1 in) Engine oil quantity: Final drive:
Seat height: Periodic oil change: Gear
760 mm (29.9 in) 0.80 L (0.85 US qt, 0.70 Imp.qt) Secondary reduction ratio:
Wheelbase: Final transmission oil: 10.156 (50/16 x 39/12)
1260 mm (49.6 in) Type: Transmission type:
Ground clearance: YAMALUBE 10W-40 or SAE 10W-30 type V-belt automatic
135 mm (5.31 in) SE motor oil Chassis:
Minimum turning radius: Quantity: Frame type:
1875 mm (73.8 in) 0.10 L (0.11 US qt, 0.09 Imp.qt) Underbone
Weight: Air filter: Caster angle:
Curb weight: Air filter element: 26.5 °
96 kg (212 lb) Oil-coated paper element Trail:
Engine: Fuel: 100 mm (3.9 in)
Engine type: Recommended fuel: Front tire:
Air cooled 4-stroke, SOHC Unleaded gasoline [Gasohol E10] Type:
Cylinder arrangement: acceptable) With tube
Single cylinder Fuel tank capacity: Size:
Displacement: 4.2 L (1.11 US gal, 0.92 Imp.gal) 80/80-14M/C 43P 9
125 cm3 Fuel injection: Manufacturer/model:
Bore × stroke: Throttle body: IRC/NR82
52.4 × 57.9 mm (2.06 × 2.28 in) ID mark: Rear tire:
Compression ratio: 2PH1 00 Type:
9.5 : 1 Spark plug(s): With tube
Starting system: Manufacturer/model: Size:
Electric starter and kickstarter NGK/CR6HSA 100/70-14M/C 51P
Lubrication system: Spark plug gap: Manufacturer/model:
Wet sump 0.6–0.7 mm (0.024–0.028 in) IRC/NR82
9-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Specifications
Loading: Front suspension: Rear turn signal light:
Maximum load: Type: 12 V, 10.0 W × 2
155 kg (342 lb) Telescopic fork Auxiliary light:
(Total weight of rider, passenger, cargo Spring/shock absorber type: 12 V, 5.0 W × 2
and accessories) Coil spring/oil damper Meter lighting:
Tire air pressure (measured on cold Wheel travel: 12 V, 1.7 W × 2
tires): 90 mm (3.5 in) High beam indicator light:
Front: Rear suspension: 12 V, 1.7 W × 1
200 kPa (2.00 kgf/cm2, 29 psi) Type: Turn signal indicator light:
Rear: Unit swing 12 V, 1.7 W × 1
225 kPa (2.25 kgf/cm2, 33 psi) Spring/shock absorber type: Engine trouble warning light:
Front wheel: Coil spring/oil damper 12 V, 1.7 W × 1
Wheel type: Wheel travel: Fuse(s):
Cast wheel 80 mm (3.1 in) Fuse:
Rim size: Electrical system: 15.0 A
14x1.60 System voltage: Sub fuse:
Rear wheel: 12 V 10.0 A
Wheel type: Ignition system: Answer back fuse:
TCI 10.0 A
Cast wheel
Rim size: Charging system:
14x2.50 AC magneto
Front brake: Battery:
Type: Model:
9 Single disc brake GTZ4V/YTZ4V
Operation: Voltage, capacity:
Right hand operation 12 V, 3.0 Ah
Specified brake fluid: Bulb voltage, wattage × quantity:
DOT 3 or 4 Headlight:
Rear brake: LED
Type: Tail/brake light:
Drum brake 12 V, 5.0 W/21.0 W × 1
Operation: Front turn signal light:
Left hand operation 12 V, 10.0 W × 2
9-2
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Consumer information
EAU26365 EAU26411 EAU26442
10
10-1
Downloaded from www.Manualslib.com manuals search engine
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Consumer information
EAU74701
Index
A F S
Acceleration and deceleration................ 6-2 Final transmission oil............................ 7-13 Safe-riding points ................................... 2-5
Air filter and V-belt case air filter Front fork, checking ............................. 7-24 Safety information................................... 2-1
elements............................................. 7-14 Fuel ........................................................ 4-9 Seat....................................................... 4-11
Auxiliary light bulb, replacing ............... 7-28 Fuel tank cap.......................................... 4-8 Sidestand.............................................. 4-13
B Fuse, replacing..................................... 7-27 Spark plug, checking.............................. 7-9
Battery .................................................. 7-25 H Specifications ......................................... 9-1
Brake fluid, changing............................ 7-21 Handlebar switches ............................... 4-6 Speedometer unit ................................... 4-6
Brake fluid level, checking.................... 7-21 Headlight.............................................. 7-27 Starting the engine ................................. 6-1
Brake lever free play, checking ............ 7-19 Helmet holders..................................... 4-12 Start switch............................................. 4-6
Brake lever, front .................................... 4-7 Helmets .................................................. 2-6 Steering, checking ................................ 7-25
Brake lever, rear ..................................... 4-7 High beam indicator light ....................... 4-5 Storage ................................................... 8-3
Brake levers, lubricating ....................... 7-23 Horn switch ............................................ 4-6 Storage compartment........................... 4-13
Brake pads and shoes, checking ......... 7-20 I T
Braking ................................................... 6-2 Identification numbers ......................... 10-1 Tail/brake light bulb or rear turn
C Ignition circuit cut-off system .............. 4-14 signal light bulb, replacing.................. 7-28
Cables, checking and lubricating ......... 7-22 Indicator lights and warning light ........... 4-5 Throttle grip and cable,
Care ........................................................ 8-1 K checking and lubricating .................... 7-22
Catalytic converter ............................... 4-10 Keyhole shutter ...................................... 4-4 Throttle grip free play, adjusting ........... 7-16
Centerstand and sidestand, Kickstarter ............................................ 4-11 Tires ...................................................... 7-17
checking and lubricating .................... 7-23 L Tool kit .................................................... 7-1
Convenience hook................................ 4-12 Labels, location ...................................... 1-1 Troubleshooting.................................... 7-29
Cowling and panels, M Troubleshooting chart........................... 7-31
removing and installing ........................ 7-8 Turn signal indicator lights...................... 4-5
Main switch/steering lock ...................... 4-3
D Maintenance and lubrication, periodic... 7-3 Turn signal light bulb (front),
Data recording, vehicle......................... 10-2 Maintenance, emission control replacing............................................. 7-28
Dimmer switch........................................ 4-6 Turn signal switch................................... 4-6
system ................................................. 7-2
E P V
Eco indicator light................................... 4-5 Valve clearance..................................... 7-17
Parking ................................................... 6-3
Engine break-in ...................................... 6-3 V-belt, checking.................................... 7-22 11
Part locations ......................................... 3-1
Engine idling speed, checking.............. 7-16 Vehicle identification number ............... 10-1
R
Engine oil and oil strainer ..................... 7-11 Rear brake lever free play, adjusting.... 7-19
W
Engine serial number............................ 10-1 Wheel bearings, checking .................... 7-25
Rear brake lever lock ............................. 4-7
Engine trouble warning light................... 4-5 Wheels .................................................. 7-19
Remote control unit................................ 4-1
11-1
Downloaded from www.Manualslib.com manuals search engine
PRINTED IN INDONESIA
2017.07 (E)
DIC183