Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Engine

Ratings Guide
Exclusively for
Dynamic Rotary UPS AND
Data Center Continuous
(DCC) Applications

1500 RPM / 444-2883 kWm


1800 RPM / 507-3213 kWm
Dynamic Rotary
UPS Data Center
Continuous (DCC)
Applications
\ The ratings are solely for DRUPS application,
applicable for supplying power continuously to a
constant or varying electrical load for unlimited
hours in a data center application.

\ These DRUPS DCC ratings should NOT be applied


outside of data center applications.

\ Ratings based on:

\ – Engine operating with fuel corresponding to


\ grade No. 2-D per ASTM D 975.

\ – ISO 3046, Part 1, Standard Reference Conditions


\ of: : 25ºC air inlet temperature, barometer
\ pressure 100 kPa, relative humidity 30%.

\ Engines sold under the DRUPS DCC ratings will


meet the performance considerations defined in
the Uptime Institute’s published requirements,
for continuous operation.

\ The specified Engine ratings are Gross Power (kWm)


and do not include any parasitic losses. The final
declared data plate and published DRUPS rating is
the responsibility of the DRUPS manufacturer.

\ The Gross power does not consider any derates


due to Altitude or Temperature of the final
Installation Site. It is the responsibility of the DRUPS
manufacturer to complete a site rating calculation.

Warranty policy for DCC ratings:


Further to Cummins Worldwide Warranty conditions (Bulletin 3381307), 2 years unlimited hours warranty
also applies to Data Center Continuous (DCC) applications. Data Center Continuous (DCC) is defined as the
maximum power which the generator is capable of delivering continuously to a constant or varying electrical
load for unlimited hours in a data center application.
1500 RPM MODEL RANGE
Standby Rating DRUPS* DCC Rating
Engine Model Emissions Compliance
kWm BHP kWm BHP
500 670 444 595 QSX15-G8 EU Stage 2
634 850 574 769 QSK19-G4 EPA Tier 2/TAL 2g
768 1030 701 940 QSK23-G3 –
969 1300 880 1180 QST30-G4 –
970 1300 880 1180 KTA38-G5 –
1224 1641 1107 1484 QSK38-G5 EPA Tier 2
1227 1645 1097 1470 KTA50-G3 –
1259 1689 1107 1485 QSK50-G2 EPA Tier 2/TAL 2g
1400 1878 1210 1622 QSK50-G3 EPA Tier 2/TAL 2g
1429 1915 1200 1608 KTA50-G8 –
1429 1915 1287 1725 KTA50-GS8 –
1477 1980 1328 1780 QSK50-G4 EPA Tier 2/TAL 2g
1582 2120 1421 1905 QSK50-G7 EPA Tier 2
1740 2332 1575 2111 QSK60-G12 EPA Tier 2/TAL 2g
1835 2460 1650 2212 QSK60-GS3 TA Luft 2g
1915 2567 1730 2319 QSK60-G4 –
1955 2620 1727 2315 QSK60-G11 EPA Tier 2/TAL 2g
2144 2875 1942 2604 QSK60-G8 –
2164 2901 1727 2315 QSK60-G18 EPA Tier 2/TAL 2g
2164 2901 1936 2595 QSK60-G21 EPA Tier 2
2388 3202 2157 2893 QSK60-G22 –
2539 3403 2304 3088 QSK78-G15 EPA Tier 2
2539 3404 2304 3088 QSK78-G9 –
2539 3403 2304 3088 QSK78-G16 TA Luft 2g
3036 4071 2696 3616 QSK95-G5 TA Luft 2g
3245 4351 2883 3866 QSK95-G4 –
3245 4351 2883 3866 QSK95-G10 EPA Tier 2

1800 RPM MODEL RANGE


Standby Rating DRUPS* DCC Rating
Engine Model Emissions Compliance
kWm BHP kWm BHP
563 755 507 680 QSX15-G9 EPA Tier 2
634 850 559 750 QSK19-G4 EPA Tier 2
669 897 608 815 QSK19-G5 EPA Tier 2
895 1200 809 1085 QSK23-G3 –
910 1220 809 1085 QSK23-G7 EPA Tier 2
1111 1490 1007 1350 QST30-G4 –
1112 1490 1007 1350 QST30-G5 EPA Tier 2
1279 1715 1063 1425 QSK38-G5 EPA Tier 2
1376 1845 1231 1650 QSK38-G4 EPA Tier 2
1380 1850 1220 1635 KTA50-G3 –
1559 2090 1394 1870 QSK50-G3 EPA Tier 2/TAL 2g
1655 2220 1470 1971 QSK50-G5 EPA Tier 2
2180 2922 1975 2647 QSK60-G6 EPA Tier 2
2180 2922 1975 2647 QSK60-G12 EPA Tier 2/TAL 2g
2715 3640 2443 3276 QSK60-G19 EPA Tier 2
2763 3705 2502 3355 QSK78-G7 –
2763 3705 2502 3355 QSK78-G11 EPA Tier 2
3028 4060 2737 3670 QSK78-G8 –
3028 4060 2737 3670 QSK78-G12 EPA Tier 2
3767 5051 3213 4309 QSK95-G9 EPA Tier 2

*Dynamic Rotary UPS


In the interest of product improvement, specifications are subject to change without notice.
Cummins Inc.
Box 3005
Columbus, IN 47202-3005
U.S.A.

1-800-CUMMINS™ (1-800-286-6467)
cummins.com

Bulletin 5676410 Produced in U.K. 1/21


©2021 Cummins Inc.

You might also like