Professional Documents
Culture Documents
Schematic Drawing of Temperature Regulator
Schematic Drawing of Temperature Regulator
Pedestal for
seating with
bottom groove of
diameter 15.5 cm
and 4.42 mm
height.
15.5
40
25
40
40
Piston rod of diameter
2.5 cm
Front Section: Top piston rod of
diameter 2.5 cm
and length
P1=9cm
Coupler
and P2=9ofcm
height
7.5 cm
Bottom piston rod
of diameter 2.5 cm
and length P1=54
cm
40
Piston base of
square (12 cm×12
cm×2 cm)
Square pedestal
of base 25 cm ×
25 cm and height
4.442 cm
Groove of 15.5
cm and 4.42 mm
height.
15.5
25
40
Side Section:
Top piston rod of
diameter 2.5 cm
and length
P1=9cm
Coupler
and P2=9ofcm
height
7.5 cm
Piston base of
40
Square pedestal
of base 25 cm ×
25 cm and height
4.442 cm
Groove of 15.5
cm and 4.42 mm
height.
15.5
25
40
Types of piston base: Piston bases and piston rod are joined by threaded joints.
12
Specifications required in the chamber:
1. Temperature Range: 0℃ to 60℃ along with indicator.
2. The provision of temperature regulator setup should be outside of the chamber.
3. Required temperature accuracy as 1℃.
4. Proper insulation.
5. Coupler of height 7.5 cm.
6. Provision of transparent door.
7. Length of piston rods: P1=9 cm and P2=54 cm
8. Two piston bases:
a) Square: (12 cm ×12 cm × 2 cm)
9. Temperature indicator.
10. Piston and piston base are joined by screw joints.
11. 4 pegs for additional support of chamber:
a) diameter 2.5 cm and height 4.5 cm
Front view of entire setup:
25 cm
25 Perspex 25
cm window cm
door
25 cm