Professional Documents
Culture Documents
Peripheral Simulation: CAPCOM 2 Unit Dialog
Peripheral Simulation: CAPCOM 2 Unit Dialog
Search by Vendor (/dd/search_vend.asp) Mode specifies the compare or capture mode to use.
Problem Report (/dd/report.asp) T7 specifies that timer 7 is used with this CAPCOM
channel.
Feedback (/dd/feedback.asp) T8 specifies that timer 8 is used with this CAPCOM
channel.
CCxIR is the interrupt request bit for the selected
CAPCOM
Downloads
channel.
Product Download (/download/product/)
CCxIO is the state of the I/O pin for the selected
CAPCOM
Compliance Testing channel. This will be an output when the mode is configured
for
ISO/ANSI Compliance (/product/isoansi.asp) compare operations and an input when the mode is configured
Validation and Verification (/product/verification.asp) for
capture operations.
of your data. The Timer/Counter 8 dialog allows you to view and change the SFRs
associated with Timer/Counter 8. This timer/counter is used to
generate the
Accept and hide this message
Important information time base for the Capture/Compare units of the MCU.
Don't show this message again T78CON contains the value of the T78CON SFR which is the
current
configuration for timer 7 and timer 8.
Change Settings
(/company/cookiesettings/)
T8REL contains the value of the T8REL SFR which is the
reload value for timer 8.
T8R is the Timer 8 Run flag.
T8IR is the Timer 8 Interrupt Request flag.
T8IN is the Timer 8 Input value.
of your data.
Change Settings
(/company/cookiesettings/)