Professional Documents
Culture Documents
Datasheet - OT FIT 18 220 - 240 450 TE CS - v.1
Datasheet - OT FIT 18 220 - 240 450 TE CS - v.1
Datasheet - OT FIT 18 220 - 240 450 TE CS - v.1
Benefits
Suitable for use with electronic Trailing Edge dimmer
Triple output currents;
Extra small housing for compact fixture;
Long lasting and high reliability
Safety ensured by OSRAM (SELV)
5 years guarantee, details follow:
https://www.osram.com/corporate/home/services/guar
antees/guarantee-level-2/index.jsp
Applications
Downlights and Spotlights
Approval marks (under preparation if not on label)
CE mark (Start from the 1st delivery)
3rd party certificate available from mass production Geometry ( L x W x H): 102 x 51 x 22 mm
Product Features
Edition: 19th, Jan. 2017 Ver.: 0.0 Status: Draft Misprints and technical changes excepted
OPTOTRONIC® LED Power Supply OT FIT 18/220 – 240/450 TE CS Product Data Sheet
Electrical Specifications
Item Value Unit Remarks
Nominal voltage 220 – 240 VAC
Nominal frequency 50 / 60 Hz
AC voltage range 198 – 264 VAC Permitted voltage range
Maximum voltage 275 V 2 hours maximum, NO damage to LED Module
Nominal current TBD mA 230V
Total Harmonic Distortion (THD) < 20 % Full load, 230 V, 50 Hz
Power factor > 0.9 Full load, 230 V, 50 Hz
INPUT
Current ripple typical. < 25 % 230 V, 50Hz with OSRAM COB TBD
8 -11.5 W Refer to 300mA output currents.
9.5 – 13.5 W Refer to 350mA output currents
Nominal power range
11 – 15 W Refer to 400mA output currents, TBD
12 – 17 W Refer to 450mA output currents
Maximum power 17 W Ta =50°C
MM mark Yes
Galvanic isolation SELV Output to mains - Touch current < 0.7 mA
Dimming control Yes Compatible with SG digital trailing edge dimmer: LEDDIM 400
DIMMING
Protections
Over temperature Input overvoltage
Automatic, reversible Maximum allowed input voltage 275V AC
Overload Output overvoltage
Automatic, reversible Yes, Limitation of Output voltage < 60V
No load Short-circuit
Yes Automatic, reversible
Wiring Diagram
Terminal: Wago 805 or equivalent With SG input cable: 0.75mm2;
Max. cable length - system: 2m With SG output cable: 0.5mm2
Weight: TBC
Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.
Edition: 19th, Jan. 2017 Ver.: 0.0 Status: Draft Misprints and technical changes excepted
OPTOTRONIC® LED Power Supply OT FIT 18/220 – 240/450 TE CS Product Data Sheet
Standards
Safety: IEC 61347-1, IEC 61347-2-13 Product name EAN10 EAN40 Pieces / box
Performance: IEC 62384 OT FIT 18 /220 – 240 /450 TE CS TBC TBC 50
Harmonic content: IEC 61000-3-2
Immunity: IEC 61000-3-3
IEC 61547
www.osram.com
Edition: 19th, Jan. 2017 Ver.: 0.0 Status: Draft Misprints and technical changes excepted