Professional Documents
Culture Documents
MCQ Acm
MCQ Acm
MCQ Acm
A 50 Hz, 3-phase induction motor has a full load speed of 1440 R.P.M. The number of poles in the
motor is
a. 2 pole
b. 4 pole
c. 6 pole
d. 8 pole
a. Synchronous impedance
b. Efficiency
c. Armature resistance
d. Voltage regulation
High speed alternators usually have
a. Both starting and running windings are connected through a centrifugal switch
a. Repulsion Motor
b. Reluctance Motor
c. Hysteresis Motor
d. Universal Motor
e. Repulsion Motor
f. Reluctance Motor
g. Hysteresis Motor
h. Universal Motor
e. Both starting and running windings are connected through a centrifugal switch
f. Centrifugal switch is used to control supply voltage
g. The running winding is connected through a centrifugal switch
h. The starting winding is connected through a centrifugal switch
A 3-phase 440 V, 50 Hz induction motor has 4% slip. The frequency of rotor current will be
a. 50 Hz
b. 25 Hz
c. 5 Hz
d. 2 Hz
The starting torque of a squirrel-cage induction motor is
a. Full-load torque
b. Slightly more than full-load torque
c. Low
d. Negligible
The efficiency of an induction motor is about
a. 100%
b. 80-90%
c. 50-60%
d. Less than 50%
The speed of a squirrel cage induction motor is changed by
a. Cascade Connection
b. Rheostat control
c. Pole changing method
d. Any of the above
A three phase, 50 Hz induction motor has a full load speed of 1440 rpm. The full load slip will be
a. 3%
b. 5%
c. 4%
d. 2%
The auto-starters (using three autotransformers) can be used to start cage induction motor of the
following type
a. Delta connected only
b. Star connected only
c. Both a and b
d. None of the above
If any two phases for an induction motor are interchanged
a. The motor will run in the reverse direction
b. The motor will continue to run in the same direction
c. The motor will stop
d. The motor will Burn
The shaft of an induction motor is made of
e. Stainless steel
f. Carbon steel
g. Cast iron
h. Aluminium
The term ‘cogging’ is associated with
e. Three-phase transformer
f. Compound Generator
g. Induction motor
h. D.C series motor
Which single phase ac motor will you select for record players and tape recorders?
a. Hysteresis motor
b. Shaded pole motor
c. Reluctance motor
d. Two value capacitor motor.
A universal motor is one
a. which can run on any value of supply voltage
b. which has infinitely varying speed
c. which can operate on ac as well as dc voltage
d. which can work as single phase or three phase motor.
In repulsion motor direction of rotation of motor
a. Repulsion Motor
b. Reluctance Motor
c. Hysteresis Motor
d. Universal Motor
Direction of rotation of a split phase motor can be reversed by reversing the connection of
a. Starting winding
b. Running winding
c. Either a or b
d. None of the above