Professional Documents
Culture Documents
Technical - Data - XQ5P1530 For TechnoFly110
Technical - Data - XQ5P1530 For TechnoFly110
48mm 16m
Working Limit Switch limit switch Repeatabilit Power cable Number of Power cable Power Cable Plug-in
Wire section
temperature type Max turns y length wires reference color power cable
* Motors are tested and certified under normal working temperatures: -10°C to +40°C. For temperatures from -20°C to +70°C, motors will continue to operate but such exceptional climate conditions must
represent less than 20% in a given year. Duty rating can be affected at these extreme temperatures as well as lifting capacity. For additional information please contact TechnoShade
* Sound emission values only serve as an indication because taken with motor alone. It is highly recommended to test a complete motorized shade in a real environment
For standard motor operation only a standard switch allowing either UP or DOWN but not both at the same time must be used. Only mechanically or electrically interlocked switches can be used.
It is possible to connect in parallel electronic motors to a switch in residential applications where the total power cable length does not exceed 10 meters. The number of motors paralleled together is limited to 4-
5 according to the switch total amperage capacity. Electronic motors cannot be paralleled connected together when controlled by a Building Management system. Compatibility between electronic motors and
BMS must be approved and tested by manufacturer of BMS.
When changing from UP to DOWN or vice versa, the switchover time must at least be 0.5 seconds and effected through an OFF position. Only switches with a defined neutral position or one with a built-in
switching delay should be used.