Professional Documents
Culture Documents
User Manual Navi-Dvd
User Manual Navi-Dvd
CONTENTS
SAFETY PRECAUTIONS -------------------------------------------------- 2
FRONT PANEL AND CONTROLLER DESCRI -------------------------- 3
Notice:
Certain descriptions in the book may differ from the actual unit.
Some pictures or icons in the book may differ from actual display.
Specifications are subject to change without notice.
SAFETY PRECAUTIONS WIRING & CONNECTIONS
1.Watching TV or other visual entertainment programs while driving is prohibited in some
states and countries. For personal safety and the safety of others, please do not watch or
operate the product while driving. Check local law enforcement agencies for usage
regulations.
2.The monitor is designed for use in 12V negative ground system; please do not install
the unit directly on a 24V bus and truck. Attempt to do so can cause damage to the unit.
3.Install only to conform to Local, State and Federal motor vehicle laws.
4.Do not disassemble or alter the unit in any way. .Any attempt to do so can cause damage
to the unit and invalidate the warranty.
5.Never clean the surface of the screen with a chemical solvent or corrosive detergent, as
they may cause permanent damage to the TFT LCD screen. Use only a micro-fiber cloth
andcleaner designed specifically for LCD panels.
6.Avoid installing the unit where it is in direct sunlight or near a heater vent. Please note
that the normal working temperature of the unit is between 0℃ to 45℃. If the internal
temperature of the vehicle is extremely high, a short cool down period is necessary
before operating the unit.
7.In extremely cold conditions, allow the interior of the vehicle to warm to a comfortable
temperature before turning on the monitor.
8.In extremely cold temperature, the movement of the picture may be slow and the picture
may be dark. It is not a malfunction. The unit will work normally once it reaches its operating
temperature.
9.please make sure the disk diameter is of 12 cm when plays, non-standard disk( like
diameter is 8 cm) or low quality disk will destroy the Optic of the units thereafter shorten
the life of the unit.
10.Due to different car specifications, please kindly ensure that the display is suitably
located and non-obstructive to the driver's needs in any way.
Notice:
Defects caused by abnormal use are not covered by the manufacturer's warranty.
2 35
FRONT CANEL AND CONTROLLER DESCRIPTION
1.POWER/ :Press to turn on/off the unit.
4.Left round button: turn clockwise/anticlockwise to adjust the volume up/down; press to
go to sound effect set up.
5.Smart Dial/ENT : turn clockwise / anticlockwise to select the item up/down; press to
.
switch between Pause/Play.
8.Mute: Press to mute the volume; press and hold for more thank 3 second, switch off
the LCD screen.
9.SEEK-/ : Press this button to go back to last chapter/track when in DVD/CD mode.
Press to decrease turning frequency in Radio mode.
10.SEEK/+ : In DVD/CD mode, press for next track/chapter. Press to increase turning
frequency in Radio mode.
11.Navi: When GPS software & hardware are available, press to switch to the Navigation
mode. Press again to return to the previous mode.
. 12.DVD: press to play disk if any disk in the loader.
17.USB Slot: Connect a USB device or USB adaptor for card reader to play video or audio.
18.SD card slot: insert SD card which contains the video or audio file, it can be played by the
unit.
20.RST:Reset button.
Notice:
The button position will be different in different models, but the function will be the same.
34 3
MAIN MENU
The Car DVD entertainment system provides Radio, Navigation (optional), DVD, AUX IN,
TV, USB, iPod (optional), Buletooth, Buletooth Music, Camera, System setup functions.
These functions can be operated by using the touch screen. While working in other modes,
pressing the button, will return to the main menu.
The function icons can be moved by touch and sliding.
Page 1
Page 2
Press “SETUP” to enter setup menu and press “ ” to return previous function
operation.
4 33
REMOTE CONTROL INTRODUCTIONS FOR RADIO MENU
Press “RADIO” on the Main Menu screen to enter the radio mode.
Stereo
Mute: Press to mute the volume; press and hold for more thank 3 second, switch off
the LCD screen.
Band: in Radio mode, press this button to switch among FM1/FM2/FM3/AM1/AM2
Volume +/-: touch and adjust the volume up /down.
: Radio auto seek or manual tuning downwards button,Press it short to auto seek
radio stations downwards, it stays at the station for 10 seconds when receiving the
strong signals. Press any key to exit and stay at that station. In manual mode, press
it lightly to fine adjust and select stationsdownwards by step, while press it long to
fine adjust and select stations downwards continuously.
32 5
DVD MODE TROUBLE SHOOTING
In main menu, click DVD to enter into DVD play mode as below interface:
1. Mute: Press to mute the volume; press and hold for more than 3 second switch
off the LCD screen.
2. Press shortly for previous chapter, press and hold for 2 seconds to increase
reversing speed x2/4/6/8/20/Normal.
3. Press shortly for next chapter, press and hold for 2 seconds to increase
forwarding speed x 2/4/6/8/20/ Normal.
31
6
FM 11. Click to confirm menu selection.
12. :Menu. When playing disks, press it to display song list, then let the user choose the
one to play( needs the disks support this function).
13. :Press it slightly to repeat song or display the played time/remained time/close
time accordingly.
14. Subtitles switch button. When playing disks, if there are several kinds of
subtitles information in disc, touch it lightly to switch subtitles. If there is only one
kind of subtitle, it will display invalid when press this icon.
AM
15. : Brightness. Press it to enter the menu for brightness/ contrast/
sharpness adjustment as below window.
Brightness
contrast
sharpness
Notices
memory function. To use these features, the disc being played must have this information 17) : repeat' press it to switch between repeat chapter/ repeat title/repeat play
recorded on it. /close repeat.
30 7
GPS NAVIGATION (OPTIONAL) AUDIO
Turn on the unit, press [NAVI] button or touch the [GPS] mode in MAIN MENU to
activate the GPS Navigation. Click [ACCEPT] to enter into the Navigation Menu.
This function is effective only when GPS SD card is in the correct slot.
TV
8 29
9.Wall paper setup Please insert the GPS map SD card into the correct card slot, and then press“ ” on the
main menu to enter system setup , then follow and set up the navigation route and
Click in the setup menu to change the wall paper from system memory, or user activate the map.
can browse SD to get the preferred picture, click and save as the background of the
interface.
SPECIFICATIONS
System Parameters:
Double click
SETUP
28 9
BLUETOOTH
7.Time setup
The system supports Bluetooth function; the unit can be connected with most Bluetooth
Mobile phone. Detailed operations are as follows:
Click to enter into the time setup interface as below.
1. Open Bluetooth OSD menu.
Enter into the main menu; press [BT] to enter into the system.
2. Bluetooth OSD
Delete
Answer
Hang‐up
Click date icon to enter into the following interface to set up date.
Mute: Press it to mute the volume, press it again to recover the.
: press it to answer when calling in.( no matter in which mode, the system
10 27
6.SRS operation: 1.Pairing with the Mobile phone:
The system apply SRS technology to enable users can adjust the sound effect in digital Turn on the Bluetooth on the phone to search for Bluetooth equipment. It will find the
way to get the best sound as preferred. SRS Stands for “Sound Retrieval System” “Car Kit”; select it and choose yes when displaying connected, then enter matching
The SRS technology applies head-related transfer functions (HRTFS) to create an code (the default code is: 0000) for confirmation. When the system has been connected
immersive 3D sound field. with the Mobile phone, the system will show [CONNECT], and [UNCONNECTED]
Make sure the SRS is setup to “on”, then come back to set up menu, click “EQ” to indicated if not be connected successfully.
setup sound effect .
Depending on the model of the cell phone, multiple attempts maybe required.
Turn on Bluetooth
Disconnect
Auto answer
when callsin
Search BT device
26 11
2.Dialing: 5.Audio effect setup
Click and input the telephone number through the number on the screen or through the
In setup menu, click to enter into audio effect setup. System offers 10 fixed
mobile phone. Touch the [ ]key and the system will transfer the sound from the
audio effect to select: Site/pop/Jazz/Class/Soft/Cinema/Club/User/Clear/Loudoff.
phone into the Car Speaker, enabling the user to talk through the microphone built in the unit.
Press the [ ]key to hang up, click [ ]to return the speaker voice into the
Mobile phone headset to keep privacy.
Call
Delete
Delete all Click “Balance” in the Audio setup interface to setup the balance. The system offers a
personalized setup that user can setup speakers (front, rear, left and right) independent
on vehicles. Click the below head image and move it at random as user's preference.
When there is an incoming call, the system will auto-switch into the Bluetooth screen in any
mode and mute the current audio playing. Touch the [ ] key to answer the call or
press the [ ] key to reject it. Click [ ] to change the voice into the Mobile
phone to keep privacy. The caller ID number will be displayed on the screen.
12 25
4.Language setup 4.Call History:
Select and click “ change language” to enter into language set up, after selecting
the language you are preferred, click ok and exit when finish.
4334098
8003534529
8526876354
3468658
Our system supports wake up function. If there is an incoming call as long as the unit is
still connected, the system will activate the Bluetooth function automatically to
choose Receive or Reject even if the machine is power off.
Note: Please understand, due to the variants of pre-installed Bluetooth modules and
software in each mobile handset, compatibility issues may result in partial or complete
incompatibility.
Press the icon “PHONEBOOK” in the BT menu to enter phonebook operation interface.
24 13
7.BT phonebook 2.GPS monitor:
Press the icon “PHONEBOOK” in the BT menu to enter phonebook operation Click “GPS Monitor”icon in the main menu to enter into the following interface:
interface.
AUX
Click the AUX icon in the main menu to enter the AUX IN mode. AUX function can play the
files in external equipments like camera, mp3, external GPS box etc. The pictures
below are the application effect with / without external signal input.
Click here to
AUX renew data
No signal
In AUX mode, user can click on the top-left corner on the screen to go back to the
system menu.
Click PIP icon to enter the PIP mode; the PIP window can be dragged to any position on
the screen; while user can carry out the operation in the navigation control panel. By
double clicking the PIP icon, or clicking the “NAVI” button on the key panel, it will
exit the PIP mode and go back to the previous mode.
14 23
SD/USB
1.Steering wheel setup
SD card can support MP3, WMA, JPEG, and MPEG file format, Copy files into SD Card
Click Steering in the setup menu to enter into the following interface for setup: and insert SD card into the unit. The files will be read automatically. The Play of Music
files is similar with the one of MP3; the video is similar with the play of VCD, DVD.
Note: 1, to let life of SD card to be longer, we suggest you take off the SD card when it is
not working.2; SD card in the main menu is N/A when there is no SD card..
After setup, click here to save
MUSIC
Click the MUSIC icon in the main menu to enter the music play mode.
There are different control buttons on the steering wheel panel in different Auto models.
For example, there are 3 buttons (V+,V-,Mode)on the steering wheel. Press and
hold the button (Say V+) on the steering wheel first by one hand, at the same time,
the other hand touch the (V+) icon on the screen, until the icon change to Red, it
proves the button V+ set successfully. User can follow the same procedure to set the
other buttons. After all buttons are set, then click the “SAVE” icon on the screen,
Then exit the Steering wheel control setting menu and finish the setting.
22 15
FILM
Click the FILM icon in the main menu to enter the movie play mode.
Film MON
PHOTO
Click the PHOTO icon in the main menu to enter the photo display mode.
16 21
SYSTEM SETUP REAR VIEW CAMERA
In the main menu, In the main menu, click CCD icon in the main menu to enter the rear view mode.
When the rear view camera is connected with the unit, rear image comes out
immediately when reverse.
System setup includes: User's setup, Audio setup, sound setup, time setup, date setup,
CALCULATOR
blue tooth setup, steering wheel setup, wall paper setup, GPS monitor setup and
Navigation setup.
In the main menu, click Calculator icon to enter into the following interface for calculator.
20 17
TV (optional) IPOD ( OPTIONAL )
Our system supports iPod connection for audio and video play function. After correct
Click TV icon in the main menu to enter the TV mode. connection with the iPod, the system will begin to read the audio and video files in iPod
automatically. And user can control the iPod playing via the touch screen on the unit.
Click the IPod icon in the system menu, and it will enter the IPod play mode as the
picture below.
18 19