Download as pdf or txt
Download as pdf or txt
You are on page 1of 87

TRAI

NING PROGRAM
 

Get the Most out of the Program 
 

Join the FHT Family Group 
With more than 1,000 members, FHT Family group is your perfect gym buddy.  

Join  our  active  community  and  get  all  your  questions  answered  by  me  personally  ​AND  a 
myriad of other professionals & experienced members.  
 
Share your progress, get motivated & discuss. 

Visit this link to join the group: ​https://www.facebook.com/groups/fhtfamily/ 

 
Please note, if your facebook name is different from the name on your order, shoot an email over to 
info@drjohnrusin.com​  because we might not be able to verify you otherwise. 

 
 
 

 
Introduction  3 

The Birth of The Foundations of FHT  3 

The Goal & Overview  6 

Defining “Pain-Free” Training  7 

The 6 Foundational Movement Patterns  8 

Importance of Functional Core Strength  9 

Building Total Body Training Days  10 

Prioritizing Big Compound Movements   12 

Effective Cardio & Conditioning  13 

Reading Each Exercise For Detail  14 

How To Ramp Up Your Lifts  15 

Intelligently Progressing Your Weights  16 

How To Modify Movements  17 

How & Why Use Bands In Training  18 

The Goal For Each 3-Week Phase  19 

Implementing “Optional” Training Days  20 

Setting Your Training Schedule  21 

Nutrition to Build Muscle & Burn Fat  23 

The Dynamic Warm Up  25 

The Recovery & Prehabilitation Day   31 

Phase 1 (3 weeks)   37 

Day 1 – Total Body Squat Emphasis   39 

Day 2 – Interval Conditioning (Optional)   43 

Day 3 – Total Body Press Emphasis   45 

 
 
 

Day 4 – Low Intensity Steady State Cardio (Optional)  48 

Day 5 – Total Body Hip Hinge Emphasis   49 

Day 6 – Recovery Day   52 

Day 7 – OFF   52 

Phase 2 (3 weeks)   53 

Day 1 – Total Body Squat Emphasis   55 

Day 2 – Interval Conditioning (Optional)   58 

Day 3 – Total Body Press Emphasis   60 

Day 4 – Low Intensity Steady State Cardio (Optional)   64 

Day 5 – Total Body Hip Hinge Emphasis   66 

Day 6 – Recovery Day   69 

Day 7 – OFF   69 

Phase 3 (3 weeks)   70 

Day 1 – Total Body Squat Emphasis   71 

Day 2 – Interval Conditioning (Optional)   75 

Day 3 – Total Body Press Emphasis   76 

Day 4 – High Intensity Interval Training (Optional)   80 

Day 5 – Total Body Hip Hinge Emphasis   81 

Day 6 – Recovery Day   84 

Day 7 – OFF  84 

 

 

Introduction 
 

The Birth of The Foundations of FHT 
What  is  the  most  effective  way  to  train  and  how  to  not  sabotage  your  progress  by  getting 
injured?  For  the  better  part  of  the  last  decade,  I’ve  been  actively  working  on  solving  this 
mystery for my professional athletes, my clients and myself.  

This  journey  has  taken  me  around  the  world,  consulting  and  coaching  some  of  the  world’s 
best  athletes,  and  learning  from  the  best  and  brightest  minds  in  the  history  of  sports 
performance,  strength  and  conditioning  and  physical  therapy.  Throughout  the  process  I’ve 
proudly  succeeded  at  training  thousands  of  clients  that  have  achieved  extraordinary, 
life-changing results along the way.  

After  spending the last 10 years  perfecting my approach to training, I felt the need to release 


a  program  that  would,  without  false  modesty,  become  one  of  the  most  innovative  12  week 
programs  ever  written.  You  probably  heard  of  it,  this  program  is  called  Functional 

 

 
Hypertrophy  Training  (FHT  for  short),  and it has changed the way people intelligently train 
forever.  

The  main  goal  was  this:  create  the  most  efficient  way  to  build  muscle,  burn  fat  and  create 
massive, functional strength and athleticism.  

From  training  my  first  athlete  a  decade  ago  to  now  working  with  professional  athletes, 
Olympians  and  people  who  just  want  more  out  of  their  bodies,  every  method,  technique 
and  programming scheme I have battle tested over the years has been solidified and unified 
in this one ultimate source: FHT.  

However,  while  there  are  areas  where  FHT  excels  beautifully,  such  as  making  you  faster, 
stronger,  bigger  (or  leaner,  if  that’s  your  goal)  than  ever  before,  there  was  one  area  where 
FHT fell short– that’s being beginner friendly.  

Simply  put,  FHT  is  a  bit  more  of  an  advanced  program  than  a beginner would be ready for. 
It  expects  you  to  have  some  previous  experience  and  a  fairly  strong  foundation  of 
movement execution and overall training experience under your belt.  

The  thousands  of  unique  people I have coached through FHT have taught me how powerful 


a  single  program  can  be,  but  it  also  taught  me  that  building  a  strong  foundation  for 
movement,  strength,  conditioning  and nutrition needs to first be mastered in order to create 
dynamic long term results.  

But  what happens when you don’t have that necessary foundation? Do you wait a few years 
until  you’ve  tried  various  other  training  programs  and  just  aimlessly  go  at  it  on  your  own? 
Or,  even  worse,  wait  until  you  get  injured  or  at  the  very  least,  demotivated  from  pursuing 
your lifelong fitness goals. 

What  I’d  actually  like  to  do  is  to  teach  you  the  Foundations,  show  you  how  simple  it  is  to 
make  a  difference  and  guide  your  fitness  “career”  properly,  from  the  very  beginning. 
Hopefully,  it  also  will  prevent  you  from  making  some  of  the  expensive  mistakes  that  I, 
myself, (and almost everybody else) made in the process.  

After  realizing  the  large  number  of  people  who  wanted  to  make  a  change  in  their  training 
and  start  prioritizing  intelligent  movement  and  strength  training  into  their  routines,  but 
weren’t  quite  ready for FHT, I knew that writing a specific program to properly teach the big 
lifts,  create  sound  movement  patterns  and  keep  people  injury free in that pivotal beginners 
stage,  was  what  needed  to  be  done.  We  needed  a  program  to  solidify  the  foundations  of 
strength and conditioning.  

 

 

But whatever you do, don’t underestimate it. 

In  the  phase  you  are  right  now,  this  program  (just on its own) will yield amazing results for 
your  body,  movement  and  strength  over  the  next  9  weeks.  It  will  also  qualify  you  to  take 
your  fitness  goals  a  bit  more  seriously  and  start  crushing  the  FHT  program  once  you  have 
graduated through the Foundations.  

I want to remove the “beginner” label from your profile and this is how we’ll do it. 

That  said,  I  welcome  you  to  the  Foundations  of  FHT,  and  I  can’t  wait  for  you  to 
revolutionize the way you train, feel and function in the next 9 weeks.  

I  want  to  know  everything  about  your  progress,  issues  and  efforts.  So,  always  feel  free  to 
reach me on Facebook, Twitter or even email.  

Put  the  focused  time  and  energy  into  this  program  now  and  set  yourself  up  for  success 
forever.  Yes,  this  is  possible,  and I’m here to prove it to you throughout this program and all 
the work we will do together in the future.  

So let’s get started! 

   

 

 

The Goal & Overview 
So  without  further  ado,  welcome  to the most comprehensive beginners strength program in 
the  industry,  The  Foundations  of  FHT!  The  goal  over  the  course  of  this  9-week  program  is 
quite  simple.  I  am  going  to  teach  you  how  to  safely  and  effectively  start  mastering  the 
foundations of strength and conditioning.  

Think  of  this  program  as  “base  building”,  setting  yourself  up  for  success for the rest of your 
training  career.  You  will  not  only  be  proficient  at  the  big  foundational  movement  patterns 
that  every  single  human  being  on  the  face  of  the  earth  should  be  able  to execute, but you’ll 
also  be  ready  to  confidently  progress  to  a  more  advanced  training  program  without 
physical  or  experiential  restrictions.  My  goal  for  you  is  to  master  the  basics  and  build  a 
solid  foundation  of  movement,  strength,  conditioning  and  function  over  the  next  9  weeks. 
And  yes,  in  case  you  were  wondering,  we’ll  start  making  dents  in  both  fat-loss  and muscle 
building over this time period as well. 

Before  we move forward, I want 
to  make  it  clear  that  we  are 
placing  an  emphasis  on 
building  strength  for  a  specific 
purpose:  mainly  resiliency 
against  injury  and  sustainable 
long  term  function  and  results. 
Many  of  you  have  been  active 
throughout  your  life  in  a variety 
of  endeavors.  But  after  working 
with  literally  thousands  of 
athletes  and  clients  throughout 
my career, I’ve seen one physical trait trump all others… strength.  

Strength  is  relative,  but  the  way we not only develop strength, but improve and maintain it, 


is  by using resistance through large movement patterns and challenging your body to create 
force,  tension  and  stability  that  will  transfer  into  any  physical  activity  inside  the  gym  or 
out.  

Getting  strong  is  just  part  of  the  entire  functional  outlook.  But  as  we  move  through  this 
program,  challenging  your  movement,  increasing  your  fitness  and  cleaning  up  some 

 

 
chronic  aches  and  pains  in  the  process,  will  get  you  stronger.  And  that’s  the  ultimate  goal 
when creating long term pain-free results that will last a lifetime. 

Defining “Pain-Free” Training 
Before we close this chapter, I do want to touch upon the difference between ​training​ pain 
and ​pathological​ pain. Training pain is the type of feeling you get when your muscles are 
being challenged and working at a high level. This type of “good” pain can also lead to 
delayed onset muscle soreness, which is also not always a bad thing. But the pain you want 
to be avoiding is sharp, intense, grinding joint or nerve pain. That’s never a good thing. 
What good is getting fit, losing fat or building muscle, if your body is left broken down and 
injured in the process? It’s easy to achieve fitness goals when placing your orthopedic and 
systemic health at risk. But you know what? Those so-called results are short lived. We 
aren’t here for the quick fix, but rather building a foundation of sound movement, strength 
and resilience. That’s what creates sustainable results. 

Simply  put,  this  Foundations  program  will  place you in the most advantageous positions to 


train  hard,  get  results,  but  also  stay  healthy  as  we  progress  through  the  9  weeks.  We  have 
hand  chosen  specific  lifts  and  exercises  that  are  protective  in  nature,  and  position  you  for 
success,  even  when  executing  some  of  these  movements  for  the  first  time.  Teaching 
someone  to  move  properly,  and  on  top  of  that, be strong and stable in these positions takes 
time.  But  we  can  streamline  the  process  with  smarter  training.  And  that’s  what  pain-free 
training is all about. 

The  myth  of  “no  pain,  no  gain”  needs  to  die  off.  Because  with  that  type  of mentality, it’s no 
wonder  why  even  the  fittest  people  are  in  constant  pain.  Here’s  a  simple  rule  to  live  by  for 
the rest of your life… never train into pain! 

This  can  get  confusing  for  people,  especially  when  a  specific  movement  “hurts”  while 
you’re  doing  it.  But  many  times,  it’s  not  the  movement  that causes the pain, but rather how 
you  are  executing  it.  So  if  something  is  painful,  the  first  step  is  to  make  sure you have your 
form  and  technique  on  lockdown.  This  program  provides  a  myriad  of  coaching  notes, 
videos  and  resources  for  you  to  improve  your  movements,  so  don’t  forget  about  those.  But 
after that, we’ll use strategic modifications to ensure you are not training into pain. 

Know  the  difference  between  these  two  types  of  pain,  and  work  your  hardest  to  create  a 
“good”  painful  sensation,  which  means  you  are  getting  the  most  out  of  your  training.  And 

 

 
again,  live  by  the  golden  rule…  if  there’s  pain,  figure  out  WHY.  Then  fix  it  or  modify 
intelligently. 

The 6 Foundational Movement Patterns 
Sometimes  people  get  caught  up  in  the  “strength”  aspect  of  a  program  and  lose  sight  of the 
functional  carryover  that  each  movement  and training day has been developed to enhance. 
This  is  why  I  like  to  look  at  the  exercises  in  this  program  as  “movements”  that  are 
challenged  in  many  different  positions,  using  different  tools,  and  of  course  for  specific 
goals.  

There  are  six  foundational  movement  patterns  that  every  single  person  should  be  able  to 
not  only  display,  but  actually  load  up  and  train  to  some  extent.  I  am  going  to  go  through 
these  individually  as  these  foundational  movement  patterns  are  the  backbone  of  this 
program, and are of the utmost importance. 

I  have  developed  the  lower  body  exercises  in  this  program  around the squat, hip hinge and 
single  leg  movement  patterns.  Most  people  are  familiar  with  the  squat,  but  remember,  the 
“squat”  doesn’t  automatically  mean  we  will  be  throwing  a  bar  on  your  back  in  the  rack. 
There  are  many  different  ways  to  challenge  this  movement  pattern  as  you’ll  see  moving 
through the 3 phases of this program. 

The  hip  hinge  is  one  of  the  most  neglected  movement  patterns  in  the  human  movement 
library,  which  is  a  shame  as  it’s  arguably  the  most  important  in  developing  resilient  lower 
backs  and  hips!  The  hinge,  which  is  also  known as the deadlift pattern will be trained from 
multiple  angles,  and  re-learned  as  many of us have forgotten how to truly use our hips. This 
will be a game changer for your injury prevention and also strength development. 

The  last  lower  body  movement  pattern  is  the  single  leg  stance, which are lunges and many 
other  variations  using  the  split  stance.  These  will  help  to  achieve  better  stability,  balance 
and strength. 

Moving  into  the  upper  body,  we  are  splitting  up  your  big  movements  into  pushing  and 
pulling.  Think  of  the  traditional  pull  up  as  a  pulling  movement,  and  the  always  polarizing 
bench  press  as  a  pushing  movement.  We  will  be  training  both  overhead  in  the  “vertical” 
plane, and also in the horizontal plane of motion,  to add some diversity. 

Finally,  no  well-rounded  movement  program  is  complete  without  direct  core  training  and 
locomotion  (aka  moving  your  body  through  space).  You’ll  be  completing  cardio  and 

 

 
conditioning  to  work  on  the  locomotion,  and  doing  some  progressive  core  movements  to 
challenge the “pillar”, which consists of the abs, hips and shoulders functioning together. 

Importance of Functional Core Strength 
Everyone  wants  a  set  of  rock  hard abs, but the most direct way to get there isn’t necessarily 
what  you’d  think.  Endless  amounts  of  crunches,  side  bends  and machine rotations will not 
get  your  midsection  ripped,  and  may leave your lower back and hips injured in the process. 
There’s  a  smarter  way to train the core, and that’s exactly what we will be prioritizing in the 
Foundations of FHT program. 

Before  we  get  into the strategies that we will be implementing in the program, it’s important 


to  first  appreciate  the  function  of  the  spinal  column.  The  spine  was  designed to be a strong 
and  stable  functional  unit.  This  means 
that  the  muscles  attaching  to  it,  such  as 
the  abdominals  and  the  back  muscles  for 
instance,  are  designed  to  make  the  spine 
as  strong  and stable as possible in order to 
resist  movement  and  transfer  force  and 
energy out of the legs and arms. 

People  end  up  getting  into  trouble  when 


they  defy  the  anatomical  and 
biomechanical  principles  of  the  spine  and 
core  with  their  training, trying to make the 
core  respond  to  movement  instead  of  it’s 
primary  purpose  of  stabilization  and 
resisting movement. 

Unwanted  movement  through  the  lower 


and  mid  back  can  cause  irritation  and 
injuries  over  time,  and  that’s  the  quickest 
way  to  derailing  your  training  and  fitness  goals.  Again,  this  is the reason why we will work 
hard  over  the  course  of  this  9-week  training  program  to  develop  and  display  stability 
through the core from a bunch of challenging positions. 

The  first  step  in  this  process  is learning how to create tension and link up the hips, core and 


shoulders  together  to  work  as  a  functional  unit.  This  is  the  single  most  important  skill  you 

 

 
can  develop  to  progress  with  a  pain-free  training  style  for  life.  The  first  movement  we  will 
work  on  is  a  plank,  and  from  there  we  will  progress  with  “anti”  core  training exercises that 
will  attempt  to  push  you  out  of  a  neutral  and  stable  core  position  to  create  resiliency  in 
multiple planes of motion. 

Finally,  the  reason  we  are  focusing  on  the  core  is  not  to  get  your  abs  ripped,  but  rather  to 
enhance  the  way  you  are  able  to  train,  to  condition  and  to  perform  in  order  to  receive  the 
aesthetics  and  fitness  benefits  that  will yield the type of “core” results you are aspiring to. A 
well  functioning  core  opens  up  the  door  for  progression  and  real  results.  Keep that in mind 
as you are shaking through some of these direct core training progressions!  

Building Total Body Training Days 
While  the  primary  goal  of  the  Foundations  of  FHT  program  is  to develop strength, skill and 
confidence  in  strength  training and beyond, the single most effective way to get you there is 
by  practicing  the  six  foundational  movement  patterns  as  much  as  possible  throughout  the 
training  week.  This  is  exactly  why  I  prioritized  three  total  body  training  days  above  other 
methods like upper and lower body splits or split body part training. 

Total  body  training  isn’t  just  a  novice  technique,  but  rather  a  method  for  beginner  and 
advanced  lifters  to  get  world  class  results  with  their fat-loss, strength, and muscle building 
goals.  By  hitting  both  upper  and  lower  body  movements  in  the  same  session,  we  are  going 
to  be  causing  one  hell  of  a  hormonal  response  to  not  only  building  muscle  and  getting 
strong, but also sparking fat-loss as well. 

This  method  is  simple,  we  will  be  programming  big  movements  in  all  of  the  foundational 
movements  patterns  every  single  training  session.  They  say  start  with  first things first, and 
that’s exactly what we’ll be doing. 

Not  only  will  we  be  able  to  get  in  a  ton  of  challenging  work  using  total  body  training,  but 
we’ll  also  enhance  the  quality  of  the  work  being  done,  as  we  know  not  all  efforts  yield 
optimal  results.  For  us,  this  tactic  will  set  us  up  for  long  term success being able to tolerate 
other  training  schemes  in  the  future,  such  as  the  lower  body,  push  and  pull  emphasis  that 
the FHT program has been programming according to. 

Finally,  total  body  training  allows  us  to  train  the  same  pattern  and  same  muscle  groups 
multiple  times  a  week,  which  is  not  only advantageous for getting strong and lean, but also 
mastering  movement  patterns  from  the  total  amount  of  loaded  practice  you’ll  be 
completing. 

 
10 
 

Master  the  ability  to  dominate  your  total  body  training  days,  and  you’ll  quickly  see  the 
power of building foundations that open up training options for years and decades to come. 

 
11 
 

Prioritizing Big Compound Movements  
Sure,  there’s  a  time  and  place for single joint isolation movements such as biceps curls, calf 
raises  and  shoulder  raises,  but  the  Foundations  of  FHT  program  will  focus  on  the  major 
multi-joint compound movements for a few key reasons. 

First,  we  are  creating  sound  movement  patterns,  and  those  consist  of  more  complex 
multi-joint  movements.  Forging  sound  movement  is  a  process,  and  we  need as much block 
based  practice  as  possible  in  order  to  lay  down  a  confident  base  level  of  function  to  layer 
upon in the programs to come. 

Second,  compound  movement  patterns  have 


been  shown  to  build  more  resilient  strength 
and  muscle  as  compared  to  isolation  work. 
With  the  ability  to  use  multiple  body  parts 
and  regions  together  to  create  force  to  move 
the  weights  in  every  exercise  of  the 
Foundations  of  FHT  program,  you’ll  be able to 
train  with  heavier  weights over time, and thus 
yield  a  greater  training  response  that  leads  to 
better  gains.  Getting  strong  is  the  first  step, 
and  once  that  is  achieved  we’ll  be  able  to  do 
amazing  things  in  terms  of  more  isolated 
training  in  conjunction  with  heavy  lifts  that 
will synergize together perfectly! 

And  in  case  you  were  wondering  about  the 


mythical  “after  burn”  of  prioritizing  strength 
training  above  cardiovascular  exercise, it’s for 
real.  But  what  it  really  comes  down  to  is  heavy  compound  movement  patterns  not  only 
burn  more  calories  in  the  real  time  during  training,  but  also  spark  a  powerful  hormonal 
state  which  will  continue  to  fire  up  your metabolic engine while regenerating your muscles 
and body to heal up from training.  

This  is  for  real,  and  one  of  the most powerful mechanisms of long term fitness and function 


that  there is. Throughout my career training athletes and clients, I have found time and time 
again  that  setting  a  foundation  with  compound  movements  truly  gives  us  the  best 

 
12 
 
advantage  to  create  a  sound  understanding  and  movement  capacity  that  you  will  literally 
use on a daily basis for the rest of your life. 

Of  course  it’s  inherently  easier  to do a few curls and push downs and call it weight training, 


but  that’s  not  why  we  are  here  training  on  the  Foundations  program.  We  are  here  for  real 
results, sustainable results and results that are not quick fixes, but hard earned and will pay 
off forever. That’s what compound movements will do for you. 

Effective Cardio & Conditioning 
I  know  you  may  be  thinking  that  you  are  here  training  on  the  Foundations  of FHT program 
to  get  strong,  do  the  big  lifts  and  create  a  base  for  your  strength  training,  but  guess  what? 
Cardiovascular  fitness  is  also  a  big  deal  when  we  are  looking  at  building functional bodies 
that  are  well  rounded  and  injury  free.  Many  times  with  cardio,  people  get  the  green  light 
and  they  overdo  it.  I  can’t  tell  you  how many times I’ve seen the so-called “cardio addict” in 
my  office  broken  down  with  preventable  injuries  and  pain,  and  the  one  thing  that  fixes 
them  is  improving  their  movement  and  implementing  strength.  Lets  just make sure that we 
don’t let that happen. 

I  know that many of you on this program have a background in fitness that involved a ton of 
cardio  with  little  to  no  resistance  training.  And  let’s  be  honest,  this  is  very  common  in  the 
current  outlook  of  the  fitness  industry.  But  I  want  to  change  the  way  you  look  at  “cardio” 
and  of  course  improve  the  effects  that  you  get  from  it  by  prioritizing  just  what  you  need, 
nothing more, nothing less.  

We  will  be implementing “optional” training days into the Foundations of FHT program that 


consist  of  one  interval  style  day,  where  you  will  be  completing  a  cardio  routine  in  an 
on-and-off  style  to  spike  the  heart  rate  up  and  bring  it  back  down  repeatedly.  We  will  also 
be  using  a  strategic  low  intensity  steady  state  cardio  day  to  create  a  cardiovascular 
baseline for our training, and to improve recovery between strength training bouts.  

You’ll  be  able  to  view  the  schedule  and different options down below in a few sections, but 


I  want  to  make  one  thing  clear.  If  you  want  to  be  lean,  strong,  pain-free  and  athletic  for  a 
lifetime,  the  emphasis  and  energy  needs  to  be  put  into  the  strength  training  days,  and 
secondarily the cardio and conditioning.  

Now  that  we  have  our  mindset  on  the  right  track,  let’s  talk  a  little  about  “pain-free”  cardio 
and  conditioning.  We  will  be  using  lower  joint  stress  variations  of  cardio  like  walking, 
biking,  and  other  exercise  machines  to  yield  the  best  response  for  your  system,  while 

 
13 
 
minimizing  the  stress  to  your  joints  and  soft  tissues.  Don’t ever underestimate the power of 
walking, and you’ll really learn that to be true over the course of the next 9 weeks.   

Reading Each Exercise For Detail 
I  have  put  a ton of detail into every aspect of this program, so I want to make sure you know 
exactly  how  to  use  the  tools  at  your  fingertips  to  get  the  very  best  results  and  experience 
possible through these 9 weeks. 

This  program  has  been  broken  down  into  three  individual  3-week  training  phases,  each 
piggybacking  off  of  one  another.  Each  phase  has  an  overview  and  description  of  what  to 
expect  through  that  3-week  training  block  with  some  mindset  and  coaching  tips  to  get  you 
started. 

You’ll  see  that  under  each  phase,  we  will  have  individual  training  days  for  both  strength 
training  and  your  optional  cardio  and  conditioning.  Each  day  will  have  another  more 
detailed  overview  of  what  to  expect  and  prepare  for  in  that  specific  day.  I  highly 
recommend  that  you  review  the  plan  for  each  training  day  before  the  workout,  as  this  will 
only  take  a  minute  or  two  and  it  will  get  your  mind  right  before  you  start  training!  Finally, 
once  you  are  in  a  specific training day, each exercise is listed and detailed for programming 
and details of execution. The programming reads as follows: 

SETS x REPS @ REST 

You  will  have  these  for  both  “ramp  up”  sets  and  working  sets.  And  I’ll  go  into  a  little  more 
detail on how to correctly use ramp up sets in the next section. 

Understanding  how  these  sets,  reps  and  rest  periods  are  written  is  imperative  to  the 
success of this program, so make sure you double check what you are doing. 

After  you  determine  your sets, reps and rest periods, it’s time for the big ticket item… how to 


properly  execute  the  exercise  just  the  way  I  want  it  done  for  a  pain-free  training effect. I’ve 
added  a  ton  of  hand  written  coaching  notes  in  here,  detailing  the  exact  way  you  should be 
executing each movement, so be sure to read these for comprehension.  

Finally,  go  through  and  click  on  the  hyperlink  of  each  movement below the coaching notes 
to  see  a  set  of  that  movement  on  video.  These  video  demonstrations  are  the  exact  way  I 
want  you  executing  the movement, so review them a few times. I recommend reviewing the 
notes  and  video  before  every single movement. This is how we master new movements and 
ingrain them in our patterns! 

 
14 
 

How To Ramp Up Your Lifts 
The  use  of  “ramp  up”  sets  are  one  of  the  most original and innovative methods you will use 
to  build  pain-free  muscle  and  skyrocket  your  overall  workload  during  the  Foundations  of 
FHT  program.  Simply  put,  we  are  going  to  extend  the  warm  up  for  each  and  every  lift that 
we’ve  programmed  to  give  you  more  sets  and  reps  in  order  to  master  that  particular 
movement  pattern.  These  “warm  up  sets”  allow  us  to  get  more  work  in,  with  less  load,  to 
lighten  up  the  stress  on the joints, while also preparing your body for maximal performance 
during the heavier “working sets” to come. 

So  here’s  how  they  are  going  to work. First, determine the amount of ramp up sets you have 


programmed  for  each  movement.  This  will be detailed in the coaching notes right about the 
working sets. These are written as SETSxREPS@REST to be clear. 

You  will  start  your  first  ramp  up  set  light,  and  execute  all  the  reps  with  perfect  form  and 
rhythm  according  to  the  coaching  notes  and  video.  The  next  ramp  up set, you will increase 
the  weight  slightly  and  execute  your  reps  once  again.  This  will be done over the course of a 
few  ramp  ups  until  you  reach  a  weight  that  is  challenging  to  keep  your  form  pristine 
through  all  the  prescribed  reps.  At  that  point,  you  have  reached  your  “working  set”  weight 
and will stay there for all working sets. 

Let’s  give  you  an  example  and  break  it  down  from  the  first  phase  of  training:  Goblet  Box 
Squat  -  predicting  that  you  can  do  8  reps  with  100  pounds  for  your  working  sets.  The 
program will say: ​Ramp Up Sets:​ 2x8@45 and ​Working Sets:​ 3x8@45.  This will look like: 
● Ramp Up Set 1​ - 8 reps with 50 pounds 
● Ramp up Set 2​ - 8 reps with 75 pounds 
● Working Set 1​  - 8 reps with 100 pounds 
● Working Set 2​ - 8 reps with 100 pounds 
● Working Set 3​ - 8 reps with 100 pounds 

This  will  result  in  five  total  sets  between  the  ramp  up  sets  and  working  sets.  Complete  all 
ramps,  followed  by  all  working  sets,  then  move  onto  the  next exercise in the same manner. 
This  is  very  straight  forward  once  you  get  accustomed  to  the  programming,  so learn it now 
and have success with it for all 9 weeks in the Foundations and beyond!  

 
15 
 

Intelligently Progressing Your Weights 
One  of  the  biggest  questions  I  get  from  my  athletes  and  clients  is  how  do  you  know  what 
weights  to  start  with  on  your  big movements, and on top of that, how do you know when to 
increase  the  weights?  This  is  a  great  question,  as  optimal  loading  is  the  key  to  creating 
pain-free  training  performances, 
while  also  getting  strong  and 
receiving  maximal  benefit  from 
the  time  and  energy  that  you’re 
putting  towards  this  Foundations 
of FHT program. 

First  thing,  realize  that  you’d 


rather  be  going  too  light  than  too 
heavy.  So  that being said, use your 
ramp  up  sets  wisely.  Working  the 
weights  up  gradually  during  those 
ramp  up  sets  will  give  you  a  pretty  good  idea  of  where  you stand on your working weights. 
This  is  another  great  advantage  of  using  ramp  up  sets  in  foundational programs, as it gives 
you practice feeling each load and working through sets with it. 

When  you  get  to  a  weight that you can 110% knock out every single rep of each working set, 


you are left with a question. Do you stay at that weight or progress heavier the next week? 

In  the  next  section,  I’ll  go  through  the  mindset  you should be hitting each week with during 
training,  but  here’s  another  loading  rule  to  live  by:  Never  miss  a  rep.  If  you  have  to  break 
form  or  tempo  of  a  movement,  then  the  weights  are  too  heavy  and  you’ll  be  more  likely  to 
compensate.  This  is  also  how  injuries  can  occur.  So  make  sure  you  have  full  mental  and 
physical  effort  going  towards  each  set,  but  when  in  doubt  on  your  form  and/or  tempo, 
reduce the weights slightly to ensure proper execution.  

If  you  go  through  and  easily  get  all  your  reps,  it’s  time  to  progress  the weight slowly. Make 
small  jumps,  as  you  are  in  this  for  3-week  blocks  of  training  at  a  time.  We  want  constant 
progression;  think  about  taking  one  step  up  the  flight  of  stairs at a time, not jumping all the 
way  up.  You’ll  quickly  gain  an  appreciation  for  where  you  need  to  be  when  adding  load  to 
movements,  and  this  comes  with  experience.  Use  the  ramp  up  sets  wisely,  feel  out  the 

 
16 
 
working  sets,  and  have  in  the  back  of  your mind that over time you’ll add weight to all your 
movements and you’ll be constantly  progressing.  

How To Modify Movements 
While  I  have  really  prioritized  the  programming  of  pain-free  foundational  movement 
patterns  in  all  training  days  of  this  program,  there  will  always  be  certain  movements  for 
specific  people  that  just  aren’t  well  tolerated.  And  if  this  happens  to  be  you,  don’t sweat it! 
This is to be expected. And yes, we have you covered! 

Unlike  many  training  programs  on  the  market,  my  staff  and  I  are  here  for  you  every  single 
step  of  the way throughout these 9 weeks and beyond. That means if you are having trouble 
with  any  movements  in  the  program,  you  can  contact  us  for  tips,  send us videos to review, 
and interact with other FHT members in our private Facebook group (FHT Family). 

We  want  to  make  modifying  this  base program a simple and easy process, so when you are 


experiencing  problems  with  any  of  the  lifts  after  attempting  them, here’s the most effective 
way to go about getting great results and educating yourself in the process: 

Step  1  -  Use  the  interactive  Facebook  group  “FHT  Family”  and  post  your  question  and 
preferably  video  of  your  movement  that  is  causing  pain  or  discomfort.  We  will  review  this 
movement in depth. 

Step  2  -  Try  the  new  technique  fixes  or  tips  from  the  post  in  the  group  the  next  week  in 
training. If you are still having problems, we will develop a modified movement pattern that 
you can have instantaneous success with! 

I’ll  mention  this  again…  getting  your painful or awkward sets on video is the single best tool 


I  have  to  diagnose  a  problem  and  give  you  an  effective  modification.  Without  seeing  you 
move,  it’s  very  difficult  to  determine  the  problem.  So  I  highly  recommend  you  do  this. 
Without  video  or  pictures,  we  are  left  with  a  trivial  guessing  game,  and  that’s  usually  not 
fun for anyone. 

And  if  all  else  fails,  you’ll  notice  that  we go through progressions of movements throughout 


the  three phases of training. You can always revert back to the previous phase’s movements 
if you had success with them! That’s just called smart training. 

But  here’s  the  deal.  We  will  get  you  a  movement  that  fits  your  body,  skill  and  goal  for  that 
given  time.  That’s  what  makes  this  program  so  special.  We  are  here  to make this the best 9 
weeks of your training career, so utilize the resources that come with this program!  

 
17 
 

How & Why Use Bands In Training 
As  you’ll  see  in the Foundations of FHT program, we incorporate simple tools in order for us 
to  place  an  emphasis  on  the  movements  first,  and  the  specific loading implements second. 
But  in  addition  to  bodyweight  movements  and  free  weights,  such  as  the  dumbbells  and 
barbells,  we  will  be  incorporating  the  use  of  bands  strategically.  Why?  They  are  a  simple 
tool but possibly one of the ​most effective pain-free strength builders​ out there. 

The  exact  bands  that  you  will  routinely  use  throughout  this  9-week program, and then into 
FHT  and  far  beyond  for  the rest of your training career, can be found for a great price ​HERE​. 
There  are a few different types of bands, but for this program I prefer the circular bands that 
come  in  different  resistances. 
Since  some  of  these  circular 
bands  get  pretty  heavy,  we 
will  be  using  the  extra-light 
and light bands often. 

While  bands  get  a  fluffy 


reputation  for  being  a 
“therapy”  tool  for  resistance 
training,  however,  the  proper 
implementation  of  these  tools 
into  training  can  create 
dynamic  training  effects  that 
will get you strong while building pain-free muscle in the process. 

Bands  offer  something  quite  unique  for  pain-free  training,  something  called 
accommodating  resistance.  Simply  put,  the  elasticity  of  the  band  holds  tons  of  energy  to 
challenge  our  movement  patterns.  And  as  the band gets stretched out further and further, it 
creates  more  and  more  resistance.  Bands  also  offer  the  freedom  to  train  some  movement 
patterns  that  are  otherwise  harder  to  execute  without  machines,  cable  setups  and  other 
equipment that would be found in a commercial gym setting.  

By  all  means  if  you  have  cables  at  your  disposal,  please feel free to use them, but if not, we 
have  added  in  banded variations of some of these movements so equipment never has to be 
a limiting factor for your training.  

 
18 
 

I  recommend  that  once  you  purchase  a  set  of  bands  or  two, throw them in your gym bag or 
keep  them  in  your  workout  area,  as  they  will  become  staple  equipment  for  nearly  every 
dynamic warm up and training session.  

This  will  literally  be  the  best  money  you’ve  ever  invested  in  exercise  equipment,  as  I 
guarantee  you’ll  fall  in  love  with  the  brutal,  but  awesome,  pain-free  training  effect  bands 
offer.  

The Goal For Each 3-Week Phase 
I  realize  that  this  is  a  lot  of  information  right  off  the  bat  before  you’ve  even  seen  the 
program,  but  I  truly  believe  that  preparation  and  focus  is  the  key  to  mastery.  And  yes,  we 
are  here  to  not  only  get  accustomed  to  world-class  strength  training,  but  also  to  create 
habits and master movements that will work for us for life. 

I  have  split  each  phase  of  training  up  into  3-week  blocks.  You  will  have  3-weeks  on  each 
phase  where  the  training  days  will  be  the  same,  giving  you  time  to  master each movement 
and  go  through  and  progress  your  loads  and  feel  for  the  exercises,  before  moving  forward 
into the next phase of the program. 

The  first  week  of  training  in  each  phase  is  all  about  exploration  and  experimentation.  I 
realize  that  most  of  these  movements  will  be  brand  new  for  you...good!  I  want  you  to  use 
your  ramp  up  sets  conservatively,  go  a  bit  lighter  and  really  focus  on  feeling  the  form  and 
technique  of  each  rep  of  every  exercise  during  the  training  week.  Mark  down  in your notes 
how  challenging  your  weights  were,  and  if  you  feel  like  they  were  not  challenging enough, 
simply make a note to bump it up next week! 

Going  into  the  second  week  of  each  phase,  I  want  you  to  add  weight  to  all  of  your 
movements,  as  the  previous  week  you  were strategically going a bit lighter to feel your way 
through  the  movements.  You’ll  notice  right  away  that  you’ll  get  a  stronger  training  effect 
and  that’s  what  we  are  shooting  for.  Keep  the  form  tight,  stay focused and execute the reps 
with precision. 

The  third  week  is  all  about  going  hard,  but  staying  smart. If you can bump your weights up 
again,  great!  If  not,  no  worries.  Work  hard  with  the  same  weights  as  the  second  week.  But 
remember,  when  building  your  weights  up  into  that  final  week  three,  keep  in  mind  the 
golden rule of never missing a rep. 

 
19 
 

After  the third week of each phase you’ll be booted right back to the start with the beginning 
of  each  new  phase! This system has been tried and true for many great lifters who have had 
amazing success, so use it and gain the benefits.  

Never  try  to  jump  too  fast.  Earn  your  right  to  add  weight,  and  always  focus  on  the  goal  at 
hand, which for us, is learning the movements and training pain-free! 

Implementing “Optional” Training Days 
As  you’ll  notice  in  the  Foundations  of  FHT  programming,  a  large  emphasis  is placed on the 
three  weight  training  days  throughout  the  week,  which  are  designed  to  be  full  body 
workouts  that  will  challenge  your  strength  and  movement.  But as many of you are working 
not  only  on  getting  strong,  but  also losing fat and moving and feeling better, we have added 
in “optional” training days, which you can execute if your schedule or goals permit! 

The  goal  of  the  optional  days  are  to  increase  your  overall  work  throughout  the  week,  but 
also  to  complete  that  work  in  an  intelligent  manner  that  spares  the  joints  while  burning 
more  calories  and  recovering  optimally  between  your  big  total  body  weight  training  days. 
These  optional  days  will  consist  of  two  available  cardio  and  conditioning  days  which  will 
incorporate  both  interval  training  and  low  intensity  steady  state  cardio,  along  with  a 
specific prehabilitation day.  

Part  of  creating  resiliency  with  training  and  movement  is  building  out  a  cardiovascular 
base,  and  that’s  exactly  what  the  optional  days  will  do  for  you.  For  some  of  you  who  only 
have  three  days  to  devote  to  training,  I  highly  recommend  that  you work walking into your 
daily  schedule  for  a  bare  minimum  of  10  minutes  a  day.  This can be done after workouts to 
spark recovery and get some base conditioning in. 

Finally,  on  your  “off”  days  I’d  like to see you completing your dynamic warm up, then going 


through  the  prehabilitation  day.  This  will  increase  your  daily  activity  for  that  day  and give 
you  more  focused  time  to  practice  some of these movements that may be brand new, while 
also  taking  care  of  the maintenance of your body so that you stay fresh and ready to train in 
the  weeks  ahead.  The  more  time  and  emphasis  you  place  on  your  nutrition  and  recovery, 
the better results you will see in this program, and the quicker you’ll be able to progress! 

If  you  go  in  with  the  mindset  that these optional training days will actually enhance the big 


weight  training  days,  you’ll  be  golden.  Lets  solidify  the big ticket items like squats, presses, 

 
20 
 
hinges  and  pulls  first,  and  your  ability  to  increase  the  intensity  and  challenges  of  training 
over time will follow a close second! 

Setting Your Training Schedule 
During  the  9  weeks  of  Foundations,  we  will  be  placing  an  absolute  priority  on  scheduling 
your  three  strength  training days above all else. Since these training days are designed to be 
total  body  in  nature,  I  recommend  that  you  place  at  least  a  day  in  between  each  of  these 
strength training sessions. 

Depending  on  the  amount  of  days  you  have  available  to  train  during  the  week,  you’ll  be 
able  to  custom  build  your  weekly  training schedule accordingly. For those of you who have 
set  aside  60  minutes  a  day  for  the  Foundations  of  FHT  program  and plan on completing all 
strength  training  days,  plus  the  optional  conditioning  days, your schedule will look like the 
schedule below. Keep in mind that your recovery day can be completed at home: 
1. Monday​ - Total Body Squat Emphasis 
2. Tuesday ​- Interval Conditioning 
3. Wednesday​ - Total Body Press Emphasis 
4. Thursday​ - Low Intensity Steady State Cardio 
5. Friday​ - Total Body Hip Hinge Emphasis 
6. Saturday​ - Recovery & Prehabilitation  
7. Sunday​ - “OFF” 
If  your  schedule  permits  you  to  complete  four  of  the  training  days,  I  want  you  to  place  a 
priority  on  the three strength training days plus the interval conditioning day. This schedule 
will look something like this: 
1. Monday - ​Total Body Squat Emphasis 
2. Tuesday​ - Interval Conditioning or “OFF” 
3. Wednesday​ - Total Body Press Emphasis 
4. Thursday ​- “OFF” or Interval Conditioning 
5. Friday​ - Total Body Hip Hinge Emphasis 
6. Saturday​ - Recovery & Prehabilitation  
7. Sunday​ - “OFF” 
And  finally,  if  you  are  only  able  to  train  through  the  three  base  strength  days  on  this 
Foundations of FHT program, we need to ensure that you have a day between training days, 
but  also  place  an  emphasis  on  your  daily  activities  on  your  off  days.  This  means  that 

 
21 
 
doubling  up  on  your  “recovery”  day  would  be  the  best  way  to  improve  results  over  the 
course of these 9 weeks.  

Remember, this portion of the program can be done from home: 
1. Monday​ - Total Body Squat Emphasis 
2. Tuesday​ - Recovery & Prehabilitation or “OFF” 
3. Wednesday​ - Total Body Press Emphasis 
4. Thursday​ - “OFF” or Recovery & Prehabilitation 
5. Friday​ - Total Body Hip Hinge Emphasis 
6. Saturday​ - Recovery & Prehabilitation  
7. Sunday​ - “OFF” 
As  I  realize  that  people’s  schedules 
change  on  a  week  to  week  basis,  I 
want  to  challenge  you  all  to stay strict 
to  your  schedule  each  and  every 
phase.  

The  lifting  days  are  non-negotiable 


parts  of  the  program,  but  hey,  if  you 
have some extra time during the week, 
get  as  many  optional  days  and 
recovery days in as possible.  

The  more the better, as long as you are 
following the guide to cardio, conditioning and recovery that we will outline for you!  
 

   

 
22 
 

Nutrition to Build Muscle & Burn Fat 
No  results  based  program  is  complete  without  talking  about  the  vital  importance  of  sound 
nutritional  strategies  that  match  up  with  your  training  goals.  As  the  saying  goes, there’s no 
out training a bad diet. 

Since this is a beginners strength program that will teach you how to be safe and effective at 
the  big  lifts,  while  also  laying  down  a  foundation  for  conditioning  and  daily  maintenance, 
I’m  going to keep the nutritional sides of things very simple. However, never mistake simple 
for  ineffective.  These  strategies  will  provide  the  foundation for your nutrition, and more so, 
the habits that you will create in conjunction with training. 

Here  are  five  golden  rules  that you should be living by when it comes to creating nutritional 


habits  that  will  enhance  your  training  goals,  while  also  creating  sustainability for the long 
term. 

Rule  #1:  Know  what  you  are  eating!  This  one is simple, but it’s the single most effective tip I 


could  ever give my clients. Objectively tracking what energy goes into your body in the form 
of  food  and  drink  is  a  huge  step  forward  in  knowing  how  to  manipulate  your  diet  and 
identify  any  red  flags.  I  recommend  using  a  calorie  and  food  tracker  on  the  phone  like 
MyFitnessPal.com  to ensure that you know exactly what you are eating, and the contents of 
everything.  Just  as  a  side  note,  I  view  green vegetables as “free” food, so go nuts on these as 
much as you can. Your health will thank you! 

Rule  #2:  Prioritize  protein  intake  above  all  else.  Many  times  when  breaking  down 
nutritional  intakes  of  even  my  highest level clients, the protein intakes are lacking. Proteins 
are  the  building  blocks  of  muscle,  and  since  we  are  training  to  improve  body composition, 
building  muscle  and burning fat, protein is important. Without getting too complicated, you 
should  be  consuming  one  gram  of  protein  for  each  pound  of  bodyweight  for  your  desired 
weight.  For  example,  if  I  currently  weigh  200  pounds,  and  have  goals  of  fat-loss  and  an 
ideal  weight  of  180  pounds,  I  will  be  eating  180  grams  of  protein  per  day.  Don’t  make  this 
more  complicated  than  it  is!  Make  sure  you  have  a  protein  source  in  each  meal,  and  hey, 
don’t shy away from a great protein shake after your workout as well! 

Rule  #3:  Fuel  your  training.  These  strength  training  days  will  challenge  your  body,  so  we 
want  to  be  fueling  up  before  training,  but  also  after  training to get the most out of recovery. 
Ensure  that  you  have  at  least  one  balanced  meal  consisting  of  protein,  carbohydrates  and 
vegetables  before  training,  and  prioritize  getting  another  well  rounded  meal  in  within  an 

 
23 
 
hour  or  two after training (again consisting of protein, carbohydrates and good fat sources)! 
However,  if  you’re  someone  who  trains  early  in  the  morning,  don’t  feel  like  you  have  to 
force  down  a  big  meal  before  training.  Have  something  easily  digestible,  like  a  protein 
shake or bar, that will give you enough energy to fuel your training session.  

Rule  #4:  Create  sound  daily  habits  around  the  meals  you  eat  routinely.  Every  single  day, 
you  will  fall  into  the  same  type  of  habits  whether  you  know  it  or  not.  For  example,  for  me, 
breakfast,  snacks  and  lunch  are  usually  the  same.  Define  which  meals  you  can normalize, 
and  key  in  on  those  meals  being  as  clean  and  healthy  as  possible.  I  am  a  big  believer  in 
making  your nutrition and training work for your lifestyle, and not forcing harsh nutrition or 
over  training  to  yield  results.  That’s  how  we  burn  out.  But  take  care  of  things  you  have 
100%  control  over.  This  will  really  make  a  difference  over  the  long  term  and  take  the 
pressure off of restrictive nutritional programs. 

Rule  #5:  ​Don’t drink your calories. This may seem minor, but let me tell you, calories add up 


quickly  when  you  are  drinking  beverages  that  contain  high  amounts  of  calories, especially 
sugar  and  fat.  I’ve  had  clients  in  the  past  that  have  lost  30  pounds  in  a  3-month  period  by 
just  switching  from  a  sugary  calorie  bomb  at  the  coffee  shop  every morning to black coffee 
in  combination  with  a  base  strength  training  program.  You  may  not  realize  it,  but  this  is 
huge!  Juices  are  another  calorie  load  that  most  people  should  be  avoiding.  But  the  simple 
rule  goes  like  this…  stick  to  water,  non-caloric  teas,  black  coffee  or  diet  soda  if  you  are  a 
soda  drinker.  Prioritize  your  calories  for  whole  food  that  will  offer  your  body  energy  and 
nutrition, which it is in need of during this training program! 

As you move through these 9 weeks, I want you to solidify these five habits. Later on, as you 
become  more  advanced,  one  of  our  goals  will  be  to  implement  a  more  detailed  nutritional 
program  that  will  determine  ideal  calories  for  your  specific  training  goals,  and  even  break 
down how many grams of protein, carbohydrates and fats you’ll consume on a daily basis. 

However,  in  the  current  phase,  I  feel  it’s  hard  enough  to  stick  to  the  training  schedule  and 
discipline, without adding another layer of complexity on top of it.  

As  training  goes,  we  must  first  lay  down  a  foundation  of  solid  daily  practices  in  order  to 
progress and get the most out of more advanced programming.   

 
24 
 

The Dynamic Warm Up 
An  effective  and  efficient  warm  up  program  needs  to  include  more  than  just  flopping 
around  on  the  foam  roller  and  doing  some  stretches  for  30  minutes  before  you  train,  but 
rather, it needs a structured plan and purpose that creates results. 

What’s  the  advantage  of  warming  up  properly  instead  of  just  going through the motions, or 
not  even  warming  up  at  all?  For  one,  an  intelligently  sequenced  dynamic  warm  up  routine 
will  bulletproof  you  against  training  injuries.  Secondly,  by  preparing your body for training 
with strategic exercises, we can increase the blood flow to muscles, lubricate the joints, and 
even  heighten  the  response  of  your  central  nervous  system  to  be  firing  on  all  cylinders 
before you ever pick up a weight.  

Sure,  staying  resilient  against  injuries  is  the  primary  reason  for  placing  your  focus  on  a 
proper  dynamic warm up, but I’d be lying to you if I didn’t also mention the added benefit of 
performance  enhancement.  Simply  put,  your  dynamic  warm  up  will  clean  up  those 
functional  loose  ends  that  have  caused  chronic  aches  and  pains  in  the  past,  while 
strengthening  and  solidifying  your  movement  so  that  you  can  move  better,  feel  better  and 
even train a bit heavier as well. 

When  working  with  clients  for  the  first  time,  I  place  all  our  energy  into  learning  and 
executing  the dynamic warm up perfectly. Many times we forget that the dynamic warm up 
is  an  essential  part  of  a  strength  and  conditioning  program,  and  not  just  a  fluffy  add  on  to 
the  beginning.  My  recommendation  to  you  is this; concentrate on perfecting these dynamic 
warm  up  movements  each  and  every  training  day  with  the  same  focused  intensity  as  the 
big loaded movements like the squat and press. 

After  9  weeks  of  mastering  your  dynamic  warm  up  sequence,  you’ll  have  put  in  work  that 
will yield serious results later on. The warm up is our first stepping stone in the process, and 
it’s  only  one  of  the  pillars  supporting  your  fitness  efforts.  One  step  at  a  time  will  get  you  to 
where  you  want  to  be  physically.  Every  aspect  of  the  program  is  important,  and  the 
dynamic warm up is just the first step! 

 
25 
 

   

 
26 
 

Schedule 
1. Elliptical ​(Or Any Other Piece of Cardio Equipment) 
Ramp Up Sets:​ None  

Working Sets:​ 5 minutes  

Coaching  Notes:  Go  nice  and  easy  on  this,  as  it  is  just  a  warm  up.  Keep  the  heart  rate  low, 
and  just  get  the  blood  flowing.  We  are  using  this  as  a  general  warm  up  to  get  your  body 
ready  for  the  dynamic warm up and training session. Think about breaking a sweat, but not 
going hard enough to fatigue yourself. 

Video: ​Quick Movement Reference: Elliptical 

2. Full Body Foam Roll  
Ramp Up Sets:​ None  

Working Sets:​ 1x30 seconds (per side and per area)  

Coaching  Notes:  We  are going to go through a quick and easy “full body” foam roll sequence 


to  work  on  your  soft-tissue  before  we  get  moving.  Roll  for  30 seconds on each setup, taking 
into  account  rolling  both  sides  on  the  areas  that  requires  it.  Move  seamlessly  through  this 
rolling sequence with minimal time between the different set ups.  

Go through the following in order:  
1. Quads (Front of Thighs)  
2. IT-Band (Side of Thighs)  
3. Hamstrings (Backs of Thighs)  
4. Adductors (Groin Area)  
5. Thoracic Spine (Mid Back)  
6. Lats (Back of Shoulders)  
7. Pecs (Front of Chest)  
*For  more  exact  notes  on  foam  rolling  technique  &  guide/video  for  ​each  individual 
movement​, see the detailed descriptions in the “Recovery Day” portion of this program.  

Video​: ​Going Through the Full Foam Rolling Sequence 

 
27 
 

3. World’s Greatest Stretch  
Ramp Up Sets: ​None  

Working Sets​: 1x6 reps (per side)  

Coaching  Notes:  From  a  standing  position,  you  will  step  forward  with  the  right  leg  into  a 
lunge  position,  letting  your  back  knee  come  down  to  the  ground.  Placing  both  hands to the 
inside  of  your  front  foot,  sink  deep  into  your  hips  getting  a  nice  stretch  through  your  groin 
and glutes.  

From  that  position,  take  the  hand  closest  to  the  front  foot  and open it up, reaching towards 
the  ceiling  and  rotating  up  with  a  deep  breath.  Replace  the  hand  to  the  outside  of  the front 
foot  and  stretch  your  hamstring  on  the  front  leg  before  stepping  back  up  to  the  starting 
position.  

You will do this in walking alternating fashion with 6 reps per side.  

Video:​ ​The World’s Greatest Stretch Guide 

4. Deep Squat to Hamstring Stretch  
Ramp Up Sets:​ None  

Working Sets:​ 1x10 reps  

Coaching Notes: Place your feet shoulder width apart with the toes slightly turned out. Bend 
over  by  hinging  back at the hips and place your hands under your toes and grab hold. It’s ok 
to  bend  your  knees  to  place  your  hands  in this position. When your hands are secure under 
the  feet, pull your body into a deep squat position nice and slow, driving your knees out and 
trying  to  sit  back  on  your  heels  as  you  bring  your  chest  into  a  more  vertical  position.  From 
this  deep  squat,  you  will  be  reversing  the  movement  by  straightening  the  legs  while  still 
holding  onto  the  toes,  and  stretching  the  hamstrings.  If  you  can’t  get  your  legs  all  the  way 
straight,  get  them  as  straight  as  you  can  while  still  keeping  hold  of  your  toes.  Be  sure  to 
move slowly through these two positions holding 2-3 seconds in each position.  

Video:​ ​Movement Reference: Deep Squat to Hamstring Stretch 

 
28 
 

5. Quadruped Bird Dog  
Ramp Up Sets:​ None  

Working Sets:​ 2x5 reps (per side)  

Coaching  Notes:  You  will  be  down  on  your  hands  and  knees  in  the  quadruped  position  to 
start.  Make  sure  you  are  in  a  strong  position,  squeezing  your  shoulders,  butt  and  core  to 
stabilize.  With  a  slow  and  deliberate  movement,  you  will  be  reaching  one  arm  and  your 
opposite  leg  out  and extending them away from each other, squeezing your glutes, shoulder 
and  maintaining  a rigid core. Hold this extended position for two full seconds then bring the 
arm  and  leg  back  in  and  return  to  the  quadruped  position.  Do  these  sets  in  non-alternating 
fashion,  so  five reps on one side, followed by 5 reps on the opposite side. Note that there are 
two sets here for each side, so after the first set, take minimal rest before completing the last 
set.  

Video:​ ​Movement Reference: Quad Bird Dog 

6. Slow Bodyweight Squat  
Ramp Up Sets:​ None  

Working Sets:​ 2x6 reps  

Coaching  Notes:  Get  your  feet  a  little  wider  than  hip-width  apart,  and  your  toes  pointed 
slightly  out  (just  so  they  are  not  facing  directly  forward,  but  not  directly  to  the side either). 
Keep  your  hands  together  in  around  your  chest  to  start  the  movement,  then  slow  and 
controlled,  squat  down  while  pressing  your  hands  straight  out  in  front  of  you.  One  of  the 
biggest  things  to  remember  on  this  movement  is  to  make  sure  that  your  weight  is  on  your 
heels,  not  falling  forward  on  your  toes.  Drive  the  butt  back  and  sit  into  your  hips  upon  a 
slow  descent.  When  you  are  at  the  bottom  of  the  squat  position,  you  should  be  in  a  stable 
position,  pause  down  there  for  a  split  second  for  stability.  Drive  up  from  the  heels,  and 
squeeze  your  butt  at the top in a smooth and coordinated fashion. Do six reps, take a bit of a 
break and reset, then complete another six reps for the second set.  

Video:​ ​Movement Reference: Bodyweight Squat 

 
29 
 

7. Seal Jacks  
Ramp Up Sets:​ None  

Working Sets:​ 1x15 reps  

Coaching  Notes:  These  are  similar  to  jumping  jacks  and have the same rhythm, but instead 


of  your  arms  coming  up  overhead,  they’re  going  to  be  coming  out  in  front  of  you  and 
meeting  (in  almost  a  clap)  in  the  middle.  Start  the  movement  with  your  feet  out  and  your 
arms  straight  out  to  each  side  at  shoulder  height.  Also,  turn  your  palms  out  so  that  your 
pinkie  finger  is  pointing  towards  the  ground.  I  want  these  to  be  a  little  more  “twitchy”,  so 
accentuate  the  change  of  direction  from  the  arms  on  the  front  and  back  side  and  the  feet 
from an in and out position.  

Video:​ ​Movement Reference: Seal Jacks 

   

 
30 
 

The Recovery & Prehabilitation Day  
* Complete the “Dynamic Warm Up” before moving into the Recovery Day activities.  

While  the  focus  of  the  Foundations  of  FHT  program  is  to  teach  and  master  the  big  lifts  so 
you  are  proficient  and  confident  in  your  movement  and  loading  patterns  with  barbells, 
dumbbells  and  bands, we need to also account for recovery and general “prehabilitation” to 
keep you fresh and progressing over this 9-week training block in preparation for FHT. 

The  strategy  that  we  are  using  to  recover  between  workouts,  but  to  also  get  some  extra 
practice  in  moving  through  important  movement  patterns  and  working  on  improving 
functional  weak  links,  is  a  specific  recovery  day.  This  day  can  be  completed  at  home  in 
addition  to  your  dynamic  warm  up  and  will  incorporate  more  detailed  foam  rolling 
techniques,  stretching,  corrective  exercises  and  even  a  little  low  intensity  cardiovascular 
activity  like  walking  to  spark  recovery.  Also,  we are working to prevent injuries before they 
happen. 

Many  times  when  jumping  feet  first  into  a  new  program  that  places  an  emphasis  on  big 
loaded  movements,  your  body  will  respond  with  muscular  soreness  a  day  or  so  after  the 
training  bout.  We  call  this  “delayed  onset  muscle  soreness”  or  simply  “DOMS”.  We  can 
reduce  soreness  while  also  improving  recovery  ability  by  completing  these  strategies,  not 
only  on  off  days  away  from  weight  training,  but  also  each  night  before  you  go  to  bed  in 
order to ensure proper recovery. 

I’ve  implemented  these  techniques  with  high  performance  athletes,  as  well  as  the  general 
fitness  population,  and  they  were  equally  as  well  for  everyone.  The  goal  is  to  keep  things 
simple, yet effective.  

Get  into  a  habit  of  implementing  this  recovery  program  into  your  daily  routine  as  much  as 
possible.  They  say  that  there  is  no  such  thing  as  overtraining,  but  rather  just 
under-recovering.  So  before  that  happens,  let’s  take  the  simple  measures  that  will  ensure 
that  you  head  into  each  training  day  of  this  9-week  ramp  up  program  with  high  energy 
levels, fresh muscles and an excitement to get better each and every day.   

 
31 
 

1. Foam Roll Thoracic Spine Extensions  
Ramp Up Sets:​ None  

Working Sets:​ 1x10 reps (breaths)  

Coaching  Notes:  With  the  foam  roller  placed  in  a  stationary  position  on  the  ground  at  the 
mid-back  level between your shoulder blades, place your feet and butt on the ground. Make 
sure  that  you  have  a  little  bit  of  tension  through  your  glutes  and  core  during this setup and 
throughout  the  motion.  Slowly  extend  your  arms  overhead  while  also  bringing  your  head 
and  neck  into  extension  by  looking  back  behind  you.  Exhale  deeply  as  you  get  to  an  end 
range  stretch,  allowing  your  mid  back  to  extend  over  the  foam  roller.  Slowly  come  back  to 
the  starting  position  and  complete  10  total  reps  coordinating  your  breath  with  the  stretch 
over the foam roller.  

Video:​ ​Foam Roll Thoracic Spine Extensions Guide 

2. Foam Roll Pecs  
Ramp Up Sets:​ None  

Working Sets:​ 1x30 seconds (per side)  

Coaching  Notes:  With  the  foam  roller  placed  under  one  side of your chest at an angle while 
laying on your stomach, you will slowly roll back and forth only 1-2 inches at a time to target 
the  pec  muscles  of  the  chest.  Be  sure  that  you  are  in  a  comfortable  position throughout the 
rest of your body, placing an emphasis on the roller on your chest. Roll one side at a time.  

Video​: ​Foam Roll Pecs Guide 

 
   

 
32 
 

3. Foam Roll Lats  
Ramp Up Sets:​ None  

Working Sets:​ 1x30 seconds (per side)  

Coaching  Notes:  While  lying  on  your  side,  place  the  foam  roller  right  under  your  armpit 
where  it  is  in  contact  with  the  major  back  muscle  called  the  lat.  From  this  position,  reach 
your  arm  up  to place the muscles under stretch before you begin to roll. Pick out a few spots 
and  roll  only  1-2  inches  at  a  time  over  the  muscle  while  keeping  the  rest  of  your  body  in  a 
comfortable and neutral position to emphasize the back. Roll both sides.  

Video: ​Foam Roller Lats Guide 

4. Foam Roll Quads  
Ramp Up Sets:​ None  

Working Sets: ​1x30 seconds (per side)  

Coaching  Notes:  ​While  on  your  stomach, place the foam roller under the front side of one of 


your  thighs.  You  can  keep  your  elbows  and  forearms  on  the  ground  to  stabilize  this 
position,  and  bring  the  opposite  leg  out  to  the  side  to  place  more  emphasis  on  the  muscles 
under  the  foam  roller.  Roll  1-2  inches  at  a  time  right  down  the  midline  of  your  thigh  where 
your quad muscles are located. Be sure to roll both sides.  

Video​: ​Foam Roller Quad Guide 

 
   

 
33 
 

5. Foam Roll Glutes  
Ramp Up Sets:​ None  

Working Sets:​ 1x30 seconds (per side)  

Coaching  Notes:  Start  this  foam  rolling  drill  in  a seated position on the roller, or if you want 


to  go  a  bit  deeper  into  those  hip  rotator  muscles,  cross  one  leg  over  the  other and roll more 
acutely  right  in  the  mid-belly  of  the  gluteus  maximus  (right  in  the  middle  of  your butt). We 
are  placing  the  roller  right  over  this  area,  targeting  one  side  at  a  time.  Rotate  your  body 
towards  the  side  you  want  to  concentrate  on  and  roll  back  and  forth  only  1-2  inches  and 
spend  a  little  more  time  here  on  the  concentrated  spots  that  may  be  a  little  more  painful 
than the others. Remember to roll both sides.  

Video​: ​Foam Roller Glute Guide 

 
 
6. Dynamic Hip Hinge Lat Stretch  
Ramp Up Sets:​ None  

Working Sets:​ 1x10 reps  

Coaching  Notes:  With  your  feet  placed  hip  width  apart  and  your  toes  pointed  directly 
forward,  we  will  be  using  a  hip  hinge  in  combination  with  a  lat  stretch.  For  the  hand 
placement,  you  can either use a pole, side of a rack, or my preferred method is a suspension 
trainer  like  the  TRX.  Grab  your  hands  onto  your  chosen  tool  and  shoot  your  hips  back 
slowly,  letting  your  arms  stretch  overhead  while  placing  a  stretch  in  your  lats  and  your 
hamstrings  simultaneously.  Sit  in  this  stretched position for a full two seconds, then slowly 
move  out of this position back up to neutral (starting position), where you will squeeze your 
butt in and stabilize yourself before moving onto your next rep.  

Video: ​Movement Reference: Dynamic Hip Hinge Lat Stretch 

 
34 
 

7. Dynamic Half Kneeling Pec Stretch  
Ramp Up Sets: ​None  

Working Sets: ​1x10 reps (per side)  

Coaching  Notes:  In  a  half  kneeling  position  (one  knee  on  the  ground  and  your  other leg out 
in  front  of  you  with  a  90-90  degree  position  at  your  hip  and  knee),  you will place your arm 
up  on  an  elevated  surface  to  stretch  the  pecs.  Make  sure  that  the  knee  on  the ground is the 
one  closest  to  the  side  pec  that  you  are  stretching.  Place  your  elbow  so  that  it  is  slightly 
above  parallel  to  the  ground,  and  start  rocking  back  and  forth  at  your  hips  to  move  in  and 
out  of  an  end  range  stretch  at  the  pecs.  Make  sure  the  mobilization  of  this  stretch  is  done 
slowly. Complete 10 reps on one side before moving onto the opposite side.  

Video​: ​Dynamic Half Kneeling Pec Stretch Guide 

 
8. Active 90-90 Hamstring Mobilization  
Ramp Up Sets:​ None  

Working Sets: ​1x15 reps (per side)  

Coaching  Notes:  ​Lying  on your back, grab the back of one of your legs and bring your hip up 


to  a  90  degree  position.  Make  sure  your  head  and  neck  remain  in  a  neutral  position  on  the 
ground.  While  holding  your  leg,  you  will  extend  and  bend your knee slowly back and forth. 
When  extending  the  leg,  hold  it  as  straight  as  possible  for  a  full  second,  then  actively 
contract  your  hamstrings  and  bend  the  knee  for  a  full  second  as  well.  Make  sure  to 
complete all 15 reps on both sides.  

Video: ​Movement Reference: Active 90-90 Hamstring Mobilization 

 
 
   

 
35 
 

9. Rear Foot Elevated Hip Flexor Dynamic Stretch  
Ramp Up Sets:​ None  

Working Sets: ​1x30 seconds (per side)  

Coaching  Notes:  Using  an  elevated  surface  such  as  a  stair  or a weight bench, you are going 
to  get  into  a  kneeling  position.  Elevate the foot on the side that you are kneeling on so that it 
rests  on  the  bench.  Cue  your  spine,  pelvis  and  shoulders  to  be  in  a  neutral  position,  and 
make  sure  to squeeze your butt on the back side leg. Place both hands on the front side knee 
and  start  to  slowly  rock  back  and  forth  to  get  a  stretch  in  the  hip  flexors  and  quads.  There 
should  be  very  little range of motion here, so only an inch or so at a time. Stay in this perfect 
position for 30 seconds and make sure to stretch both sides.  

Video​: ​Rear Foot Elevated Hip Flexor Dynamic Stretch  Guide 

 
10. Brisk Walking  
Ramp Up Sets:​ None  

Working Sets: ​10-45 minutes  

Coaching  Notes:  ​After  you have completed your dynamic warm up, foam rolling techniques 


and  mobility  drills  for  your  recovery  day,  one  of  the  best  things you can do is go for a walk. 
If  you  are  in  a  gym  setting, jump on a treadmill. If this recovery day is taking place at home, 
go  outside  for  your  walk!  I  want  you  to  concentrate  on  a brisk walk with a steady cadence, 
but  still  staying  under  control  and  keeping  the  heart  rate  down  to  about  100-120  beats  per 
minute.  Extend  this  walk  as long as you’d like, as this is a great way to increase your overall 
daily activity.  

Video: ​Quick Movement Reference: Brisk Walking   

 
36 
 

Phase 1 (3 weeks)  
 

The  first  phase  of  the  Foundations  of  FHT  training  will  consist  of  implementing  strategic 
variations  of  each  foundational  movement  pattern  to get the very most out of your training, 
while  also  teaching  you  proper  technique,  form  and  mechanics  for  each  lift.  As  mentioned 
in  the  Introduction,  you  will  have  the  same  training  days  for  all  3  weeks  of  this  phase, 
allowing you to master the movements, before progressing and moving on to Phase 2.   

I’m  a  big  believer  that  we  must  earn  the  right  to  train  heavy  with  a  barbell,  and  not  jump 
right  into  the  training  fire,  but  rather  layer  in  smart  training  that  will  have  you  progressing 
just  as  long  as  you  put  in  the  focused  work.  When  building  lifestyle habits and mastering a 
new  skill,  you  never  want  to  leave  it  up  to  chance.  Random  half  efforts  lead to half results. 
Put  your  focus  into  this  program  and  you’ll  be  healthier,  stronger  and  fitter  than  ever.  It’s 
that easy. 

 
37 
 

Many  of  the  lifts  that  you  will  be  completing  in  the  first  phase of this program will be more 
joint-friendly,  but  will  also  be  set  up  in  a  way  that  will  help  to  naturally  improve  your 
movement to prepare you for the next level.  

I  have  split  the  weight  training  up  into  three  “total  body”  days,  each  with  a  big  movement 
emphasis.  This  will  help  us  increase  our  total  work  done  during  each  session  while 
challenging every aspect of your body to work as a functional unit. 

Yes,  I  realize  that  for  some  of  you,  these  lifts  will be brand new and there will be a learning 
curve  involved.  That’s  great,  and  exactly  what  I  want  and  expect.  The  way  we  ensure 
success  is  by  reading  through  the  coaching  notes  before  you  execute  each  movement,  and 
hell,  even  watch  the  clip  of  the  video  if  you  are  more  of  a  visual  learner.  The  key  here  is 
executing  the  movements  properly,  and  getting  better  each  and  every  session  throughout 
this 3-week training block. Practice and experience makes perfect. 

If  you  put  in  the  work  to  start  light and increase your weights slowly over this first phase of 


training,  you’ll  be  setting  yourself  up  for  huge  amounts  of  success  leading  into  the  second 
phase  of  training  (weeks  4-6).  As  previously  mentioned,  training  is  not  an  all  or  none 
process,  but  just  a  strategic  sequence  of  stepping  stones  to  get  you  where  you  want  to  be. 
You  also  want  to  train  in  a  manner  that  is  sustainable,  promotes  orthopedic  and  systemic 
health and creates lifelong habits that will fuel your physicality forever. 

Now  it’s  time  to  get  started!  Lets  focus  on  taking  those  first  steps  towards  intelligently 
building  your  movement  library  with  proper  training.  Training  is  an  investment  of  your 
time,  energy  and  focus,  and  you  couldn’t  be  investing  it  any  better than in the Foundations 
of FHT. 

   

 
38 
 

Day 1 – Total Body Squat Emphasis  
Welcome  to  your  first  training  day  on  the  Foundations  of  FHT!  We  will  start  this  day  off 
with  a  focused  dynamic warm up that, over the course of this program, will become second 
nature with mastery! From there, it’s time to train! 

The  first  movement  of  the  day,  the  ​Banded  Glute  Bridge​,will  work  the  glutes  and 
hamstrings  while  placing  an  emphasis  on  continuing  the  “warm  up”  process  to  ensure you 
are ready for the big movement ahead, the squat. 

The  squat  is  the  emphasis  of  this  total  body  day,  and  the  foundational  variation  we  will 
start  this  program  off  with  is  the  ​Goblet  Box  Squat​.  Using  a  dumbbell  held  in  front  of  your 
chest  in  the  “goblet”  position  will  keep  your  chest  up,  allow  you  to  really  hold  your  core 
tight and stable while going down and completing a full range of motion squat. Also, the box 
will  start  to  teach  you  a  proper  squat  depth  and  technique  while  helping  to  stabilize  the 
bottom portion of the movement. 

From  there,  we  are  going  to  move  through  two  upper  body  emphasized  movements,  the 
Neutral  Grip  Banded  Pull  Up  and  the  ​Incline  Dumbbell  Bench  Press​.  I  have  strategically 
chosen  these  movements  to  start  us  off  as  they  are  joint  and  positionally  friendly  and  will 
aid you in getting a feel for the strength work in the upper body. 

No  session  on  the  Foundations  of  FHT  program  is  complete  without  a  little  direct  core 
training,  which  is  a  common  pain-point  for  many  people  moving  into  a  strength  training 
program.  My  favorite  movement  to  teach  full  body  tension  while  working  hard  to  contract 
the  core,  glutes  and  shoulders  together  as  a  functional  unit  is  the  ​RKC  Plank​.  Be  sure  to 
maximally  squeeze  your  entire  body  on  these  and  get  the  very  most  out  of  your  short 
duration  bursts  on  each  and  every  set.  These  are  about  creating internal tension, not about 
holding for minutes on end. 

There  we  have  it.  Make  sure  to  read  the  detailed  coaching  notes,  watch  the  videos  and 
really practice sound movement patterns and techniques throughout! 

   

 
39 
 

Schedule 
*Dynamic Warm Up  

And then: 

1. Banded Glute Bridge  
Ramp Up Sets:​ 2x6@30  

Working Sets:​ 3x12@30  

Coaching  Notes:  ​Sit  on  the  ground  and hook a circular band around your heel, pull it across 


your  waist,  and  then hook the other end to the opposite heel (the video will help you see the 
set  up).  Then  lie  down,  with  your  arms  out  about  45  degrees  from  your  sides.  Press  your 
hands  firmly  into  the  floor  as  you  drive  your  hips  up,  squeezing  your  glutes  as  hard as you 
can  for  1  second  at  the  top  of  the  movement.  Slowly  lower  back  down  to  the  starting 
position.  Keep  your  core  engaged  throughout  the  entire  movement,  and  make  sure  your 
neck and spine are in neutral.  

Movement Reference:​ ​Banded Glute Bridge Video  

2. Goblet Box Squat  
Ramp Up Sets:​ 2x8@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  Get  a  dumbbell  into  the  chest  position  and  your  feet  out  into  the  squat 
position,  just  like  the  video.  Squat  down  to  the  bench  in  a  slow  and  controlled  motion  (do 
not  let  your  butt  plop  onto  the  bench).  Rock  slightly  back  onto  the  bench  before  standing 
back  up  dynamically  to  the  start  position.  Keep  your  core  engaged  throughout  the 
movement,  and  squeeze your butt at the top. Also make sure to keep driving your knees out, 
so that they don’t buckle inwards.  

Movement Reference:​ ​Goblet Box Squat Video  

 
40 
 

3. Band-Assisted Neutral Grip Pull Up  
Ramp Up Sets:​ 2x3@45  

Working Sets:​ 3x6@45  

Coaching Notes: For this movement, the band assists you by deloading your weight, making 
it  easier  to  complete the pull up movement. To get set up, grab a band (the thicker the band, 
the  easier  the  pull  up  will  be)  and  wrap  it  around the bar that you’ll be pulling up on. You’ll 
need  a step or a box to stand up on to make sure that you can reach the bar. Once it’s around 
the  bar,  pull  the  band  down,  bend  your  knee  (you  can  use  whichever  leg  you  want),  and 
place  your  knee  onto  the  bottom  of the band (keep your other leg on the step/box). Grab the 
bar  with  your  hands  facing  each  other,  giving  you  the neutral grip position. Take your back 
leg  off  of  the  step/box  and  lower  yourself  all  the  way  down  until  your  arms  are  straight, 
before  pulling  right  back  up  so  that  your  face is in line with the bar. Make sure to keep your 
head  straight  and  your  spine  in  neutral-  don’t  let  your  chin  point  up  or  down  at  any  point. 
Keep  your  core  engaged  and  a  hollow body position to decrease extension stress on the low 
back as well.  

Movement Reference:​ ​Band-Assisted Neutral Grip Pull Up Video  

4. Incline Dumbbell Bench Press  
Ramp Up Sets:​ 2x12@45  

Working Sets: ​3x12@45 Coaching  

Notes:  ​Set  the  bench  up  at  a  45-degree  incline.  With  a  dumbbell  in  each  hand,  sit  on  the 
bench  with  the  dumbbells  placed  on  your  legs  (right  above  your  knees).  Getting  the 
dumbbells  into  position  here  is  extremely  important,  so  watch  the  set-up  from  the  video  a 
few  times. One leg at a time, kick the dumbbells up as you lie back on the bench, and get the 
dumbbells  into  the  starting  position  at  your  shoulders.  Make  sure  your  feet  are  out  wide 
enough,  brace  your  core,  tighten  your glutes and make sure everything is stable. Then press 
the  dumbbells  directly  up  towards  the  ceiling,  bringing  them  towards  each other at the top 
(just slightly), before slowly lowering them back down to the starting position.  

Movement Reference:​ Incline Dumbbell Bench Press Video  

 
41 
 

5. RKC Plank  
Ramp Up Sets: ​None  

Working Sets:​ 4x20sec@30  

Coaching  Notes:  This  is similar to a standard plank on your elbows, but the big difference is 


going  to  be  your  effort.  Once you are in position (exactly like the video), squeeze your arms, 
core,  butt  and  legs  as  hard  as  you can, building a maximal amount of tension. Make sure to 
keep a neutral spine and your shoulders pressed down throughout.  

Movement Reference:​ ​RKC Plank Video  

   

 
42 
 

Day 2 – Interval Conditioning 
(Optional)  
While  these  conditioning  days  are  optional,  this  is  a  great  way  to  increase  the  total 
workload  during  the  week  of  training.  Simply  put,  you’ll  burn  more  calories,  lose  more  fat, 
and recover quicker to put your all into the big strength training days. 

If  you  can  fit  this  conditioning day into your training schedule between the first and second 


lifting  days,  you  will  be  implementing  ​Intervals​.  This  will  consist  of  30  seconds  of  hard 
work  followed  by  60  seconds  of  rest,  and  repeating  this  scheme  multiple  times  to  get  a 
training  effect.  Intervals  are  a  great  way  to  train  heart  rate  variability,  which  is  spiking the 
heart  rate  up  and  trying  to  recover  as  quickly  as  possible  in  the  rest  periods.  The  exercise 
bike  is  one  of  my  favorite  tools  for  pain-free  interval  conditioning  training,  but  feel  free  to 
use any cardio machine such as an elliptical or rower.  

Keep  in  mind  that  the  goal  for  this  conditioning  day  is  to  work  your  cardiovascular system 
while minimizing the stress on your joints. So for now, no running! 

Schedule 
*Dynamic Warm Up  

And then: 

1. Exercise Bike Intervals  
Ramp Up Sets: ​None  

Working Sets:​ 15x30sec@60  

Coaching  Notes:  Jump  on  an  upright  exercise  bike,  or  any  other  piece  of  low  impact cardio 
equipment  such  as  an  elliptical  if you do not have a bike at your disposal. Start off by riding 
at  a  moderate  pace  for  a  minute  to  get  the  groove,  then  from  there  it’s  time  for  “intervals” 
which  will  consist  of  30  seconds  of  hard  pedaling,  followed  by  60  seconds  of  relative  rest 
where  you  are  pedaling very slowly. You will complete 15 rounds of 30 seconds of work and 
60  seconds  of  rest,  trying  to  recover  as  quickly  as  possible  between  rounds.  Work  on 
keeping  great  posture  and  incorporating  deep  breathing to bring down your heart rate in an 
efficient way. Work hard on these, and really push your limits on the work times!  

 
43 
 

Movement Reference:​ ​Bike Intervals Video  

Day 3 – Total Body Press Emphasis  
While  the  Foundations  of  FHT  is  built  around  three  full  body  training  days,  each  day  will 
have  an  emphasized  movement  and  focus  for  the  day.  In  the  second  lifting  day,  our  big 
movement is the horizontal pressing pattern. 

Many  people  struggle  with  pressing  movements  such  as  the  bench  press  due  to  a  lack  of 
shoulder  mobility  and  stability,  and  generally  less  than optimal posture. The way we make 
sure  that  you  are  pressing  pain-free  is  by  implementing  something  called  a  “primer” 
movement before your big presses, and in this day that movement is the face pull. 

The  ​Face  Pull  will  help  to  activate  the  muscles of the shoulders including the rotator cuff to 


ensure  great  positioning  of  the  shoulder  and  warming  that  region  up  further  for  optimal 
pain-free performance.  

After  you  are  primed  off  the  face  pull,  we  are  using  a  more  well  tolerated  press  movement 
this  month  in  the  ​Dumbbell  Bench  Press​.  Dumbbells  allow  for  more  free  range  of  motion 
and  don’t  lock  you  into  place  like  two  hands  on  a barbell does. This is great for learning the 
press  as  you’ll  need  to  move  slowly  and  deliberately  to  stabilize  the  weights  through  a  full 
range of motion. 

Next,  we  are  going  to  get back into the lower body and concentrate on our single leg pattern 


with  the  ​Dumbbell  Split  Squat​.  Think  of  the  split  squat  like  the  simplified  version  of  the 
lunge,  where both feet stay on the ground throughout the set and you are in a better position 
to use your hips and core to stabilize. 

To  finish  off  this  training  day,  we  are  going  back  to  a  spine  friendly  row  with  the  ​Chest 
Supported  Dumbbell  Row​.  This  is  done  on  an  incline  bench,  which  deloads the lower back 
and hips, so all the energy and emphasis is placed on the muscles moving the weight. 

Finally,  we  are  going  to  end  this workout with the ​Side Plank to work the core from a strong 


and  stable  position.  The  side  plank  is  a  highly  effective  functional  core  builder  for 
integrating  the  hips  with  the  core  and  learning  how  to  activate  and  contract  these  regions 
together.  

Time to get after this training day!  

   
 
44 
 

Schedule 
*Dynamic Warm Up  

And then: 

1. Cable/Band Face Pull  
Ramp Up Sets: ​2x6@30  

Working Sets: ​3x12@30  

Coaching  Notes:  ​Do  this  from  a  standing  position.  Make  sure  you  have  the  rope  extension 
(just  like  the  one  in  the  video),  hooked  onto  the  cable  hook.  Set  the  cable  at  highest  or 
second  highest  notch  on  machine  (should  be  at  about  your  head height). Squeeze and hold 
for  a  second  on  the  back  part  of  the  movement.  Make  sure  not  to  shrug  your  shoulders,  so 
concentrate  on  keeping  them  pressed  down.  If  you  have  a  band,  place  the  band  around  a 
rack or stable pole at about head height, grab the band with an overhand grip with about six 
inches between the hands, and pull back into the face pull movement.  

Movement Reference:  

Cable Face Pull Video  

Banded Face Pull Video  

2. Dumbbell Bench Press  
Ramp Up Sets:​ 2x8@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  This  is  going  to  be  the  same  movement  as  the  Incline  Dumbbell  Bench 
Press  from  Day  1,  but  this  time  you’re  going  to  be  setting  up  on  a  flat  bench  (no  incline). 
Grab  a  dumbbell  in  each  hand,  sit  on  the  bench  with  the  dumbbells  placed  on  your  legs 
(right  above  your  knees).  Getting  the  dumbbells  into  position  here  is  extremely  important, 
so  watch  the  set-up  from  the  video  a  few  times.  One  leg at a time, kick the dumbbells up as 
you  lie  back  flat  on  the  bench,  and  get  the  dumbbells  into  the  starting  position  at  your 
shoulders.  Make  sure  your  feet  are  out  wide  enough,  brace  your  core,  tighten  your  glutes 
and  make  sure  everything  is  stable.  Then  press  the  dumbbells  directly  up  towards  the 

 
45 
 
ceiling,  bringing  them  towards  each  other  at  the  top  (just  slightly),  before  slowly  lowering 
them back down to the starting position.  

Movement Reference: ​Dumbbell Bench Press Video  

3. Dumbbell Split Squat  
Ramp Up Sets:​ 2x10@45  

Working Sets:​ 3x10@45  

Coaching  Notes:  Get  on  level  ground  and put one foot out in front, and the other one behind 


you,  holding  dumbbells  in  each  hand.  Bend  both  legs  down,  keeping  your  front  knee 
slightly  over  your  front  foot,  but  don’t  let  it go too far over your toes. One leg at a time for all 
10  reps,  and  then  immediately  switch  to  the  other  side  and do another 10 reps. Dumbbell in 
each  hand, keeping the core tight, and again coming down to where your knee is grazing the 
floor.  Watching  the  video  of  these  a  few  times  will  be  very  helpful  to  see  the  movement 
pattern as well as the tempo.  

Movement Reference: ​Dumbbell Split Squat Video  

4. Chest Supported Dumbbell Row  
Ramp Up Sets​: 2x15@45  

Working Sets:​ 3x15@45  

Coaching  Notes:  We  want  to  be  setting  up  the  incline  bench  between  30-45  degrees  here, 
making  sure  that  when  lying  face  down  on  the  bench  we  have  clearance  between  the 
dumbbells  and  the  ground  when  the  elbows  are  fully extended and the shoulder blades are 
slightly  protracted.  The  setup  is  also  key  for  the  success  of  this  movement,  integrating  a 
strong  and  stable  hip,  pelvic  and  spinal  position.  Squeezing  the  butt  hard  and  keeping  a 
rigid  torso  and  spinal  position  is  a  requisite.  The  dumbbells  will  be  placed  in a neutral grip 
in  both  hands and the row will go through a full range of motion, really accentuating the top 
squeeze  portion  of  the  movement.  Throughout  this  movement,  it’s  important  to  be  able  to 
maintain  uncompensated  control  of  each  and  every  repetition,  to  keep  tension  in  the  back 
and get the most out of the strength and muscle benefits of this movement.  

 
46 
 

Movement Reference: ​Chest Supported Dumbbell Row Video  

5. Side Plank  
Ramp Up Sets: ​None  

Working Sets:​ 4x20sec@30 (per side)  

Coaching  Notes:  ​While  lying  on  your  side,  position  your  elbow  and  forearm  on  the  ground 
just  below  your  shoulder,  while  your  feet  are  stacked  on  top  of  one  another.  Be  sure  that 
your  entire  body  is  in  a  straight  line,  so  your  hips  and  trunk  are  in  a  neutral  position. 
Squeeze  your  butt,  core  and  shoulders  as  hard  as  you  can  to  create  stability  through  your 
body  for  20  seconds.  Go  directly to the opposite side before taking the 30 second rest period 
between sets.  

Movement Reference:​ Side Plank Video  

   

 
47 
 

Day 4 – Low Intensity Steady State 
Cardio (Optional) 
Lets  be  honest,  low  intensity  steady  state  cardio  is  not  sexy,  but  it  is  one  hell  of  a  tool  for 
increasing  cardiovascular  condition,  while  also  burning  calories  and  increasing  daily 
activity level without being too hard on your joints. 

You  should  be  focused  on  ​Walking  for  this  workout,  whether  it  is  on  a  slight  incline on the 
treadmill  or  outside.  Walking  is  one  of  the  single  most  undervalued  physical activities, but 
we are going to place an emphasis on it in this program both for cardio and recovery. 

Make  sure  you  are  walking  with  arm  swing  and  your  “natural”  gait.  This  is  not  a  game  of 
speed,  but  we  also  don’t  want  you  strolling  around  like  you  are  window  shopping  at  the 
mall. Moderate speed will do the trick. 

Progress  over  the  course  of  this  phase  by  either  walking  at  a  slightly  faster  speed,  a  higher 
incline  (if you are on the treadmill) or just go for a few minutes longer on every walk. Simple 
mastery  of the basics will go a long way! Remember, this is a great way to spark fat loss and 
increase your total weekly activity, while avoiding any stress on your joints.  

Schedule 
*Dynamic Warm Up  

And then: 

1. Slight Incline Treadmill Walk  
Ramp Up Sets: ​None  

Working Sets: ​10-45 minutes  

Coaching  Notes:  Get  on  the  treadmill  and  bring  the  incline  up  to  2.0  and  get  to  a  speed  of 
2.5-3.0MPH.  You  want  to  keep  your  heart  rate  below  125  beats  per  minute,  so  adjust  your 
incline  and  speed  accordingly.  Biggest  thing  here  is,  DO  NOT  hold  onto the treadmill! Keep 
good  walking  form  the  entire  time.  Try  and  increase  the  incline  by  1  degree  each week (e.g. 
week 2 you should be at an incline of 3.0). 

Movement Reference:​ ​Slight Incline Treadmill Walk  

 
48 
 

Day 5 – Total Body Hip Hinge Emphasis  
In  the  final  day  of  the  training  week,  we  will  be  focusing  in  on  the  hip  hinge  movement 
pattern  as  our  marquee  movement.  You  may  also  know  this  pattern  as  the  “deadlift”  but 
before  we  start  yanking  barbells  off  the  floor,  we  will  earn our way up the functional chain 
to ensure success. 

This  training  day  will  start  with  a  primer  movement  to  get  us  ready  for  the  hip  hinge.  The 
3-Point  Single Arm Dumbbell is a staple movement for strength, muscle and shoulder health 
so  really  focus  in  here.  We  are  using this to work the back directly and activate big muscles 
like the lats to work for us later on in the training day. 

After  the  row, we will start up with the ​Dumbbell Romanian Deadlift (RDL)​. This movement 


is  one  hell  of  a  variation  of  the  hip  hinge  that  teaches  you  to  use  your  hips  and  load  the 
glutes  and  hamstrings  instead  of  folding  over  your  spine  and  getting  into  a  poor  position. 
The  reason  we  are  starting  with  this  movement  is  that  it  allows  the  hands  to  be  free  with 
dumbbells,  keeping  the  weights  more  over  your  center  of  mass,  which  is  more  spine 
friendly.  Also, the RDL involves both a raising and lowering portion of the lift, which is great 
for learning how to move under load through full ranges of motion. 

This  day  is  full  of  staple  foundational  movements,  so  we’ll  move  forward  with  the  ​Hands 
Elevated Push Up​. Many times people have trouble executing a sound push up that displays 
great  core  stability  and  the  use  of  full  body  tension.  This is the reason that we are using the 
hands  elevated  position,  which  will  decrease  the  relative  “load”  of  the  movement,  making 
your  push  ups  feel  lighter  and  easier  so  we  can  key  in  on  the  hip, pelvic and core positions 
as well as the pushes. 

Finally,  no  program  is  complete  without  an  overhead  pressing  variation.  Today  we’ll  be 
doing  the  ​Single  Arm  Dumbbell  Overhead Press​. This movement is great for not only getting 
strong  and  building  muscle,  but  maintaining  optimal  posture  and  alignment  of  the  spine 
and shoulder. 

Finish  off  the  day  with  a  ​Dumbbell  Loaded  Carry​,  which  is  essentially  walking  under 
control  with  dumbbells  in  your  hands.  This  is  a  great  full  body  movement  that  will  create 
stability  through  the  shoulders  and  core,  while  teaching  you  how  to  brace  your  core 
effectively! 

 
49 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. 3-Point Single Arm Dumbbell Row  
Ramp Up Sets:​ 2x12@30  

Working Sets:​ 3x12@30  

Coaching  Notes:  Set  up  on  the  bench,  with  one  knee  up  so  that foot is just off of the back of 
the  bench  and  have  the  other  leg  off  to  the  side  with  a straight knee. Use the opposite hand 
on  the  bench  to  get  into  a  stable  position.  Drive  the  dumbbell  back  towards  your  hip, 
keeping  the  shoulder  pressed  down.  Then  nice  and  slow  on  the  way  down  into  a  slight 
stretch. Then repeat the movement. Rest for 60 seconds after each set.  

Movement Reference:​ ​3-Point Single Arm Dumbbell Row Video  

2. Dumbbell Romanian Deadlift (RDL)  
Ramp Up Sets: ​2x8@45  

Working Sets: ​3x8@45  

Coaching  Notes:  ​When  picking  up  the  dumbbells,  if  they’re  starting  on  the  ground,  make 
sure  you  pick  them  up  with  as  neutral  of  a  spine  position  as  possible.  This  may  require 
pulling  them  from  a  box  or going down into a partial lunge. Once you have the dumbbells in 
your  hands,  place  them  on  the  outside  of  your  body  with  palms  facing  one  another. Before 
you  start  the  movement,  you  want  to  take  a  breath  in,  brace  your  core,  and  squeeze  the 
handles  of  the  dumbbells  to  create  tension  in  your  arms  and  upper  back.  Then  send  your 
hips  backward,  drop  your  chest,  and  lower  the  dumbbells  down  your  legs,  keeping  only  a 
soft bend in the knee. Go down until you feel tension in your hamstrings, and make sure you 
don’t  compensate  with  your  spinal  position.  Once  you  are  at  the  bottom  of  the  lift, 
immediately  come  back  to  the  top  in  a  dynamic movement, and squeeze your glutes. Brace 
your core and start the descent of the movement again.  

Movement Reference: ​Dumbbell RDL Video 

 
50 
 

3. Hands Elevated Push Up  
Ramp Up Sets:​ 2x3@45  

Working Sets:​ 2x8@45  

Coaching  Notes: ​Place your hands on a flat bench shoulder-width apart. Step your legs back 
onto  the  floor,  one  at  a  time,  so  that  you’re  in  a  push  up  position.  Squeeze  your  glutes, 
tighten  your  core,  and  rotate  your  shoulders  down  and  back  before  lowering  your  chest 
down  to  the  bench.  Make  sure  that  as  you  go down, your elbows are tucked into your sides 
and  they  don’t  flare  out.  Once  you  get  to  where  your  chest slightly touches the bench, push 
back  up  to  the  starting  position.  It’s  very  important  that  throughout  this  movement,  your 
body  remains  in  a  straight  line.  Your spine and neck should remain in a neutral position, so 
be careful not to tuck your head down or lift it up.  

Movement Reference: ​Hands Elevated Push Up Video  

4. Single Arm Dumbbell Overhead Press  
Ramp Up Sets: ​2x12@30  

Working Sets: ​3x12@30  

Coaching  Notes:  ​Grab  a  dumbbell  in  one  hand  and  get  into  a  split  stance.  The  leg  on  the 
same  side  as  the  hand  that’s  holding  the  dumbbell  should  be  behind  you, and the other leg 
in  front  of  you.  The  arm  that’s  not  holding  the  dumbbell  should  be  out  at a 45-degree angle 
from  your  front  leg.  Position  the  dumbbell on top of your shoulder so that your pinkie finger 
is  the  furthest  away  from  your  head.  Brace  your  glutes,  tighten  your  core,  and  press  the 
dumbbell  directly  up  so  that  your  bicep  is  almost touching your ear, and then lower it back 
down  to  your  shoulder.  This  should  just  be  an  isolated  movement  with  that  arm,  so  the 
lower body should be completely stable the entire time.  

Movement Reference:​ ​Single Arm Dumbbell Overhead Press  

   

 
51 
 

5. Dumbbell Loaded Carry  
Ramp Up Sets: ​1x30sec@30  

Working Sets: ​4x30sec@30  

Coaching  Notes:  ​To  make  it  easier  on  the  lower  back,  place  the  dumbbells  on  an  elevated 
surface  both  at  the  start  and  at  the  end  of  this  exercise  so  you  don't  have  to flex your spine 
forward  to  pick  them  up  off  the  ground  or  put  them  down.  Get  a  dumbbell  in each hand as 
heavy  as  you  can  control  and  walk  with  them  for  30  seconds.  Squeeze  the  handles  of  the 
dumbbells  as  hard  as  possible,  and  make  sure  that  you  use  a  shorter  step  length  and  keep 
your  core and shoulders firing and steady throughout the walk. Get a weight that challenges 
you  big  time  to  keep  them  in  hand  for  a  full  30  seconds.  If  it  doesn't  scare  you  just  a  little 
that you are going to drop them, it's not heavy enough!!  

Movement Reference: ​Dumbbell Loaded Carry Video  

Day 6 – Recovery  

Day 7 – OFF  
 

   

 
52 
 

Phase 2 (3 weeks)  
 

After  the  last  3-weeks of foundational training, you should be feeling empowered and ready 


to  kick  it  up  a  notch  in  Phase  2  of  the  Foundations  of  FHT.  And  yes,  we  will be progressing 
some  of  the  big  movements  centered  around  the  squat,  press  and  deadlift  patterns  to  keep 
you moving forward and breaking limits. 

You’ll  quickly  see  that  the  exercise  variations  in  the  second  phase  have  been  bumped  up a 
notch  on  the  functional  pyramid,  and  that  means  getting  the  barbell  into  your  hands  and 
starting to move your weights up over time. 

I  have  placed  a  huge  emphasis  on  choosing  movements  that  will  continue  on  the  teaching 
process,  and  are  also more joint and learning friendly for lifters just beginning with the iron. 
This  will  ensure  that  we  continue  to  have a steep learning curve and get you the experience 
that  is  necessary  to  start  yielding  results  that  you can not only notice with your proficiency 
of movement, but also in how  your body looks and feels. You’ll see a change in this phase. 

 
53 
 

The  goal  for  this  phase  is  again  to  master  these  movements  and  key  in  on  perfecting 
technique,  form  and  increasing  load  each  week  while  maintaining  optimal  execution.  I 
highly  recommend  that  you  study  the  coaching  notes  before  each  and  every  programmed 
movement  in  the  training  days  while  also  watching  the  videos  to  double  check  you  are 
using perfect form and technique. As movements get more challenging, you need to focus. 

So  here’s  the  deal!  If  you  work  diligently  through  this  phase  and  piggy  back  off  the  first 
phase  of  the  Foundations  of  FHT,  you’ll  be  ready  to  start  implementing  the  holy  grail  of 
strength  training,  the  barbell  in  traditional  lifts  like  the  bench  press,  deadlift  and  squat. 
Again, this is something that is earned, and not just handed over. 

Aside  from  the  strength  training  days,  focus  on  increasing  the  intensity  of  your  cardio  and 
conditioning  on  your  off  days  if  you  have  the time to use those optional workouts. If not, be 
sure  to  work  the  recovery  days  into  your  routine.  You’ll  start  feeling  the  need  to  enhance 
recovery this phase as the lifts progress and become more challenging on your system. 

Let’s  get  after  it,  the  second  3-week  phase  of  strategic  and  intelligent  training. The ball is in 
your  court,  so  it’s  time  to  capitalize  on  your  gains  and  create  a  strong  foundation  moving 
forward before moving on to the final phase - Phase 3. 

   

 
54 
 

Day 1 – Total Body Squat Emphasis  
As  you’ll  quickly  see,  the  “blueprint”  of  the  Foundations  of  FHT  has  been  setup  to  ensure 
that  you  are  stepping  up  your  movements,  loads  and  intensities  of movement little by little 
over  the  9-week  training  program.  And  this  phase  is  a  great  example  of  progression  from 
both a movement standpoint, but also the amount of total work done. 

We  are  increasing  the  work  sets  you’ll  be  completing  in  this  phase  to  continue  on  your 
progress.  You  earned  it.  Work  can  be  defined  by  the  total amount of reps you are doing in a 
movement,  a  training  day  or  overall  in  a  training  week. Over time, we want to increase this 
to create an environment for improving strength, muscle mass and fat-loss. 

The  squat  is  the  focus  of  the  first  training  day  again,  but  we  have  progressed  this  to  a  free 
standing  squat  without the box this phase, the ​Goblet Squat​. I want you to focus on trying to 
translate  the  squat  from  the  box  to  free  standing  where  the  pattern  and  motion  itself  looks 
very much the same. This will come naturally. 

To prepare for squats, we have the ​Barbell Glute Bridge as our primer movement. It’s pivotal 
that  you  use  a  barbell  with  45  pound  plates  on  it  to  ensure  that  you  can  roll  the  bar  up  on 
your  hips  and  not  have  to  pick  it  up,  place  it on your hips then bridge. If you have access to 
bumper  plates,  which  are  the  same  size as the traditional 45-lb plate, but they are lighter in 
weight,  you  can  use  these  as  you  progressively  get  heavier week-to-week. If you don’t have 
access  to  bumper  plates,  and  the  45-lb  ones  are  too  heavy,  then  modify  by  doing  less  reps 
with that weight. Also, ensure that you are using a pad or a mat between you and the bar. 

We  have  changed  your  hand  position  for  the  vertical  pull  this  phase  to  a  traditional 
“pronated”  grip,  where  your  palms  will  face  away  from  you  during  the  ​Band-Assisted  Pull 
Up​.  Keep  the  same  range  of  motion  and  mechanics  as  last  phase,  the  only  difference is the 
hand position on the bar. 

And  speaking  of  the  neutral  grip hand position, we have programmed this into your presses 


on  this  training  day  with  the  ​Neutral  Grip  Dumbbell  Bench  Press​,  in  order  to  alter  the 
movement pattern from last month.  

I’m  also excited to progress your core work into more “dynamic stability” work, meaning we 
are taking you from isometrics from last phase, and starting to used controlled movement to 
challenge  you  with  the  ​Dead  Bug​.  Work  hard  and  move  slowly  through  these  with  great 
stability. 

 
55 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Barbell Glute Bridge  
Ramp Up Sets:​ 3x10@45  

Working Sets: ​3x10@45  

Coaching  Notes:  ​Breaking  down  the  range  of  motion  here  a  bit,  we  are  going  to  go  with 
barbell  glute  bridges  where  you  will  be  lying  flat  on  the  ground  with  your  knees  bent  in  a 
bridge  position  and  having  the  barbell  on  your  hips  just  like  the  hip  thrust.  Drive  up  and 
squeeze  for  a  full  second  at  the  peak  contraction  and  control  the  barbell  all  the  way  back 
down  to the ground. Essentially, I want these dead stop style, where you are literally resting 
for  a  second  between  every  rep.  These  will  really  cause  a  novel  pump  in  your  backside  to 
get the day started!  

Movement Reference:​ ​Barbell Glute Bridge Video  

 
2. Goblet Squat  
Ramp Up Sets:​ 3x8@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  Just  like  the  Goblet  Box Squat, but we’re not going to be squatting down on 


a  box/bench  for  this  one.  Get  a  dumbbell  into  the  chest  position  and  your  feet  out  into  the 
squat  position.  Squat  down  just as you do with the bodyweight squats, and make sure to hit 
a  depth  of  at  least  parallel  or  below.  Then  drive  back  up  dynamically  to  the  start  position 
and  squeeze  your  glutes  at  the  top.  Keep  your  core  engaged  and  your  weight  on  your heels 
throughout  the  movement.  Also make sure to keep driving your knees out, so that they don’t 
buckle inwards.  

Movement Reference:​ ​Goblet Squat Video  

 
56 
 

3. Band-Assisted Pull Up  
Ramp Up Sets:​ 3x3@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  This  is  going  to  be  the  same  as  you  did  in  Phase  1, but just with a different 
hand  position. For this movement, the band assists you by deloading your weight, making it 
easier  to  complete  the  pull  up  movement.  To  get  set  up,  grab  a  band  (the  thicker  the band, 
the  easier  the  pull  up  will  be)  and  wrap  it  around the bar that you’ll be pulling up on. You’ll 
need  a step or a box to stand up on to make sure that you can reach the bar. Once it’s around 
the  bar,  pull  the  band  down,  bend  your  knee  (you  can  use  whichever  leg  you  want),  and 
place  your  knee  onto  the  bottom  of the band (keep your other leg on the step/box). Grab the 
bar  in  an  overhand  grip  about  shoulder-width  apart.  Take  your  back  leg  off  of  the step/box 
and  lower  yourself  all  the  way  down  until  your  arms  are  straight,  before  pulling right back 
up  so  that  your  face  is  in  line  with  the  bar.  Make  sure  to  keep  your  head  straight  and  your 
spine  in  neutral-  don’t  let  your  chin  point  up  at  any  point.  Keep  your  core  engaged  and  a 
hollow body position to decrease extension stress on the low back as well.  

Movement Reference:​ ​Band-Assisted Pull Up Video  

4. Neutral Grip Dumbbell Bench Press  
Ramp Up Sets:​ 3x12@45  

Working Sets:​ 3x12@45  

Coaching  Notes: This is going to be the same movement as the Dumbbell Bench Press on the 
flat  bench,  but  using  a  different  hand  position.  Grab  a  dumbbell  in  each  hand,  sit  on  the 
bench  with  the  dumbbells  placed  on  your  legs  (right  above  your  knees).  Getting  the 
dumbbells  into  position  here  is  extremely  important,  so  watch  the  set-up  from  the  video  a 
few  times.  One  leg  at  a  time,  kick  the  dumbbells  up  as  you  lie  back  flat  on  the  bench,  and 
get  the  dumbbells into the starting position at your shoulders. For this variation, your hands 
will  be  turned  so  that  your  palms are facing one another (neutral grip hand position). Make 
sure  your  feet  are  out  wide  enough,  brace  your  core,  tighten  your  glutes  and  make  sure 
everything  is  stable.  Then  press  the  dumbbells  directly  up  towards  the  ceiling,  keeping the 
palms facing one another, before slowly lowering them back down to the starting position.  

 
57 
 

Movement Reference:​ ​Neutral Grip Dumbbell Bench Press Video  

5. Dead Bug  
Ramp Up Sets: ​None  

Working Sets: ​4x6@30 (per side)  

Coaching  Notes:  ​Lying  on  your  back,  you  will  have  your  arms  out  straight  in  a  vertical 
position  to  the  floor  while  your  hips  and  knees  are  bent  to  a  90-90  position.  This  is  the 
starting  position.  From  here,  you  are  going  to  very  slowly  extend  the  right  leg  and  left arm, 
reaching  them  down  towards  the  ground  in  a  controlled  way  then  bringing  them  slowly 
back  up  to  the  starting  position.  Reciprocate  between  the  arms  and legs for a total of 6 reps 
per  side  in  each  set.  Be  sure  to  brace  the  abs  and  glutes  and  really  move  slowly  through 
these ranges of motion.  

Movement Reference: ​Dead Bug Video  

Day 2 – Interval Conditioning 
(Optional)  
The  power  of  the  interval  cardiovascular  conditioning  is  most  likely  apparent  after  last 
phase,  so  we  are  going  to  continue  on  with  this  method  again  in  Phase 2. Instead of having 
you  in  a  passive  position  on  the  exercise  bike,  we  are  progressing  and  getting  you  up  by 
starting a controlled ​“Jog”​ this month. 

The  ability  to  run  like  an  athlete  is  a  commonly  overlooked  aspect  of  general  health  and 
function.  I  realize  many  of  you haven’t run in a while, hence the reason why we are starting 
you  off  with  intervals,  as  well  as  with  a  slower  and  more  deliberate  speed.  By  doing  these 
shorter  burst  intervals,  and  keeping  them  at  only  a  moderate  speed,  this  will  help  to  not 
stress  your  joints  (which  I’ve  said  previously  that  running,  especially  for  long  periods  of 
time) is notorious to do. 

Intensity  is  not  our  focus  here,  but  rather  the  quality  of  your  gait  and  training  your body to 
endure  some  repeated  loading  through  the  joints  and  muscles.  Over  the  course  of  the  next 

 
58 
 
three  weeks,  try  to  progress  slowly  with  increasing  speed.  And by all means, if you want to 
head outside to get your work in, go for it! In this case, walk slowly for the rest periods. 

Alright  guys,  this  is  the  progression  that  we  need  in  order  to  move  forward  with  your  base 
cardio!  Work  hard  and  stay  smart  with  these.  The  goal  here  is  not  to  get  you  ready  to  run 
marathons,  but  rather progress the intensity (aka the speed) of the runs over time so we can 
start  incorporating  controlled  tempo  runs  and  sprints  into  your  movement  library  that  will 
be  another  huge  tool  to  spark  fat-loss,  increase  muscle  mass  and  stay  athletic  for  the  long 
run. 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Treadmill Jog Intervals  
Ramp Up Sets: ​None  

Working Sets: ​15x30sec@60  

Coaching  Notes:  ​These  are  just  like  they  sound,  lower  level  running  intervals.  You  will  be 
moving  into  a  moderate  speed  jog  for 30 seconds, then jumping off the treadmill by keeping 
your  feet  on  the  rails  to  rest  for  60  seconds.  Over  the  course  of  the  next  few  weeks  on  this 
phase,  you  can  get  a  little  faster  each  time  to  continue  to  challenge  yourself.  But again, we 
want  this  only to be moderate intensity and shorter bursts of effort to keep the joint stress to 
a minimum and reintroduce running back into your routine.  

Movement Reference: ​Treadmill Jog Intervals Video  

   
 
59 
 

Day 3 – Total Body Press Emphasis  
This  second  weight  training  day  of  phase  2  excites  me  because  we  are  opening  up  one  of 
your  big  foundational  movement  patterns  and  placing  a  barbell  in  your  hands  for  loading! 
The  barbell  bench press is the staple movement of this day, and again, we are going to work 
diligently to prepare you for optimal pain-free performance on this lift. 

This  training  day  starts  off  with  ​Band  Pull  Aparts​,  which  are  possibly  the  single  most 
effective  primer  movement  for  shoulder  health  and  function.  Even  though  these  are 
executed  with  banded  resistance,  focus  in  on  driving  your  hands  apart,  really  squeezing 
your  shoulders  hard,  and  staying  under  control  throughout  the  entire  range  of  motion.  We 
want  to  elicit  a  “pump”  effect  from  these  sets,  so  you  should  be  feeling  the  burn  and  feel 
your  shoulders  fill  up  with  blood.  This  is  exactly  the  response  we  want  before  bench 
pressing. 

The  ​Barbell  Bench  Press  has  been  earned  during  this  phase,  but  we  must  ensure  that  you 
have  proper  form,  tempo  and  choose  loads  that  allow  you  to  perform  this  staple  lift  with 
perfect technique. Study these coaching notes and watch the videos. 

After  dominating  the  bench  press,  we  are headed back into the lower body and progressing 


our  single  leg  pattern  with  ​Dumbbell  Reverse  Lunges​.  The  reverse  lunge  is  a  little  more hip 
dominant,  meaning  less  wear  and  tear  on  the  knees,  and  it  incorporates  the  glutes  and 
hamstrings to a greater degree, which is exactly what most people need. 

To  end  the  day,  we  are  going  to  get  some  more  higher  volume  back  work  in  to  emphasize 
postural  restoration  and  create  a  training  effect  that  will  build  muscle in the right places to 
help  achieve  higher levels of pain free function. For the ​Low Row​, we’re going to use either a 
cable setup if you have that at your disposal, or bands if not. 

And  since  we  had  great  success  with  both  the  RKC  and  side  plank  last  phase, why not add 
them  together  in  the  form  of  the  ​3-Way  Plank​?  That’s  exactly  what  we  will  do,  so  work 
diligently to squeeze hard and maximize those seconds in each position of this exercise. 

You  will  most  likely  need  some  extra  recovery  by  this  day  in  the  program,  especially after, 
so  make  sure  you  place  an  emphasis  on  getting  in  a  few  recovery  days  to  expedite  that 
process and ensure that you are fresh and ready to go for the last training day of the week. 

 
60 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Band Pull Aparts  
Ramp Up Sets:​ 3x6@30  

Working Sets: ​3x12@30  

Coaching  Notes:  Standing,  grab  a  band  with  an  overhand  grip  about  shoulder  width apart. 
Your  legs  should  be  about  hip  width  apart,  with  just  a  slight  knee  bend.  Tension  through 
your  core  and  drive  your  hands  apart  from  one  another,  making  sure  to keep the shoulders 
pressed  down  and  not  letting  them  shrug  up.  Then  slowly  bring  them  back  out  in  front  of 
you  to  where  you  started.  Try  to  keep  tension  in  the  band  throughout  all  reps.  Also  make 
sure  to  keep  your  spine  in  neutral  by  not  dropping  your  head  down  or  looking  too  far  up 
during the movement.  

Movement Reference: ​Banded Pull Apart Video  

   

 
61 
 

2. Barbell Bench Press  
Ramp Up Sets: ​3x8@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  ​This  is  the  traditional  barbell  bench  press.  Lie  down  on  a  flat  bench  with 
the  barbell  racked  above  you.  Place  your  hands  about  shoulder  width  apart  and  grab  the 
bar.  Once  you  take  the  bar  off  the  rack,  press  your  shoulders  into  the  bench,  squeeze  your 
glutes,  and  tighten  your  core.  Then  bring  the  bar  slowly  down  to  your  chest  under  control, 
pausing  it  there  for  a  split  second  and  then  exploding  it  up  to  a  1-second  lock  out at the top 
where  you  are  actively  trying  to  squeeze  your  pecs  and  shoulders  to  maximize  tension.  I 
want  you  to  go  heavy  enough  where  you  lose  speed,  but  not  too  heavy  where  you 
jeopardize your form and technique.  

Movement Reference:​ ​Barbell Bench Press Video  

3. Dumbbell Reverse Lunge  
Ramp Up Sets:​ 3x8@45  

Working Sets:​ 3x8@45  

Coaching  Notes:  Stand  with  a  dumbbell  in  each  hand  and  your feet side-by-side. Step back 
with  one foot (keeping the other foot firmly planted) and lunge down so that your back knee 
almost  touches  the  ground.  Then  drive  your  back  leg  up  to  the  starting  position  by 
tensioning  the  glute  in  your  front  leg,  and  bring  the  back  leg  up  to  the  starting  position. 
Squeeze  your  glute  at  the  top  of  the  movement,  and  then  step  back  with  the  same  leg.  Get 
the  chest  angled  down  a  bit  to  target  the  glutes  and  hamstrings  and  stay  smooth with your 
movement.  

Movement Reference:​ ​Dumbbell Reverse Lunge Video  

   

 
62 
 

4. Neutral Grip Low Cable/Band Row  
Ramp Up Sets: ​3x15@45  

Working Sets: ​3x15@45  

Coaching  Notes:  ​Setup  on  the  low  cable  row  machine  and  use  a  slow  tempo  pulling  back 
and  pausing  for  a  second  on  the  back  side  of  the  movement.  Really  work  this  movement 
and  “feel”  the  back  muscles  working.  You  want  to  maintain  great  form  throughout  all  10 
reps.  If  you  don’t  have  access  to  a  low  cable  row machine, then you can do the banded low 
row  variation.  For  this,  take  a  band  and  wrap  it  around  the  bottom  of  pole  or  squat  rack, 
and  get  a weight bench or box to sit on. You want the bench/box positioned far enough back 
that  when  you  grab  the  band  there’s  no  slack  in  it  and  you  have  tension  in  it  when  your 
arms  are  fully  extended.  From  here  the  movement  and  execution  cues  are  the  same  as  the 
low cable row.  

Movement Reference:  

Neutral Grip Low Cable Row Video  

Neutral Grip Banded Low Row Video  

5. 3-Way Plank  
Ramp Up Sets: ​None  

Working Sets:​ 4x20sec@30 (per side)  

Coaching  Notes:  This  is  a  great  movement  for  progression  since we have mastered the RKC 


Plank  and  the  Side  Plank  in  the  phases  before!  The  3-Way  plank  will  consist  of  doing  both 
sides  of  the side plank for 20 seconds, then finishing off the round with the RKC plank for 20 
seconds. So this will be 60 total seconds of planking in three different positions per set, with 
a 30 second rest period between the sets.  

Movement Reference: ​3-Way Plank Video  

 
63 
 

Day 4 – Low Intensity Steady State 
Cardio (Optional)  
Since  we  turned  up  the  intensity and challenge in the first few workouts of this phase while 
incorporating  jogging  intervals,  we  are going to simplify the steady state cardio with a more 
joint-friendly variation, the ​Exercise Bike​. 

If  you  don’t  have  access  to  an  exercise  bike,  feel  free  to  hop  on  the  elliptical  or  any  other 
cardio  machine here with the focus of having your heart rate around 125 beats per minute. If 
you  don’t  have  a  device  that  gives  you  your  heart  rate,  then  take your pulse (either on your 
neck  or  wrist)  for  6  seconds,  and multiply the number of beats by 10 to get your BPM (beats 
per minutes).  Avoid the natural tendency to work harder, as this is not what we want.  

Again,  this  is  some  extra  work during the week if you can fit it into your schedule, simple as 


that.  These  seemingly  “small”  optional  cardio  and  conditioning days will add up to create a 
compound  effect.  Looking  at  fat-loss  and  body  recomposition  as  a  long  term  goal,  these 
days  will  not  only  pay  off  for  the short term by increasing your daily activity, but it’ll create 
habits that will fuel sustainable fat-loss and activity for a lifetime. 

 
   

 
64 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Exercise Bike (Outdoor Bike or Elliptical)  
Ramp Up Sets:​ None  

Working Sets:​ 10-45 minutes  

Coaching  Notes:  Get  on  the  exercise  bike  and  go  for  10-45  minutes.  Keep  the  heart  rate 
below  125  beats  per  minute  so  that  we  don’t  turn  this  recovery  based  cardio  day  into 
something  that  will  overtax  the  body.  If  you want to jump on your outdoor bike and go for a 
cruise,  perfect!  You  can  walk  outside,  or  use  any  other  piece  of  cardio  equipment to sub in 
here,  but  the  only  rule  is  that  you  keep  your  heart  rate  down  and  keep  this  a  lower  level 
activity.  

Movement Reference:​ ​Exercise Bike Video  

   

 
65 
 

Day 5 – Total Body Hip Hinge Emphasis  
This  training  day  is  again  full  of  progressions  on  the  movements that you have earned! The 
big  movement  of  the  day  will  be  a  barbell  rack  pull,  which  is  essentially  a  deadlift  with  a 
barbell  with  the  height  of  the  bar  raised  up  off  the  floor  to  make  it  more  learning  and  joint 
friendly.  

We  will  prepare  for  this  rack  pull  by  using  the  ​Split  Stance  Single Arm Dumbbell Row​. Last 
phase  we  stabilized your hips and core with the 3-point stance, but we are going to progress 
this  movement  by  getting  you  up  on two feet and splitting your stance which will challenge 
your core to a greater extent.  

After  creating  a  pump  and  training  effect  through  the  back  and  lats,  it’s  time  to  move  into 
the  ​Barbell  Rack  Pull​.  Tension  is  a  big  key  here,  so  ensure  that  before  every  rep,  you  are 
getting  your  spine  into  a  great  position,  bracing  your  abs  and  glutes  hard  while  squeezing 
the bar as hard as you can, and lifting the weight with ultimate control. 

Over  the  course  of  this  three  week  training  block,  progress  the  weights  up  slowly  on  the 
rack  pull.  We  don’t  have  to  go  crazy  here,  and  I  don’t  want  you  grinding  out  reps. 
Remember,  we  are  building  movements  from  the  ground  up,  so  look  at  this  as  blocked 
practice that you’ll also get a training effect from. Form, form, form! 

Since  the  rack  pull  is  the  biggest  movement  pattern  that  we  have  incorporated  into 
programming  to  this  point,  we  are  going  to  keep  the  ​Hands  Elevated  Push  Up  the  same  as 
last  phase,  and  place  an  emphasis  on trying to lower the hands closer to the ground and get 
all the reps with ease! 

Also,  we’ll  be  using  the  first  shoulder  isolation  exercise  in  the  ​Prone  Rear  Deltoid  Raise​, 
which  is  a  game  changer  for  shoulder  health  and posture. Work slowly through a full range 
of  motion  on  these  and  get  ready  for  a  nasty  burn!  Fight  through  this  feeling,  as  this  is 
expected and needed to get a training effect. 

Progressing  from the loaded carries that we did last month, we are using a more challenging 
variation  on  this  training  day  in  the  form  of  the  ​Dumbbell  Suitcase  Carry​.  Simply  put,  we 
are  using  a  dumbbell  in  one  hand and walking with it, which will attempt to side bend you. 
Fight to keep perfect alignment at the core and shoulders and walk under control! 

 
66 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Split Stance Single Arm Dumbbell Row  
Ramp Up Sets:​ 3x10@30  

Working Sets:​ 3x10@30  

Coaching  Notes:  ​Set  up  in  a  split  stance  on  the  dumbbell  rack  (or  something  similar  in 
height),  holding  a  dumbbell  in  the  same  hand  as  the  leg  that’s  back,  and  put  your  other 
hand  on  the  rack.  Brace  your  core,  and  drive  the  dumbbell  up  and  back  towards  your 
armpit.  Think  of  moving  the  dumbbell  like  a  pump,  really  getting  a  stretch  through the lats 
at  the  bottom  of  the  range.  Make sure not to lose your spinal position, and keep it in neutral 
throughout the movement.  

Movement Reference:​ Split Stance Single Arm Dumbbell Row Video 

   

 
67 
 

2. Barbell Rack Pull  
Ramp Up Sets:​ 3x6@45  

Working Sets:​ 3x6@45  

Coaching  Notes: ​The easiest way to set this up is inside the power rack. You’ll need to set up 
so  that  the  barbell  is  elevated  to a height a few inches below the knee cap. If you don’t have 
access  to  a  power  rack,  the  bar can also be set up by using either pulling blocks or stacks of 
plates  to  elevate  the  bar.  The  bar  should  never  be  so  low  as  to  lose  the  ability  to  lift  with  a 
neutral  spine.  Once  the  bar  height  is  set,  approach  the  bar  so  that  it  begins  in  contact with 
your  body.  Place  your  hands  on  the  bar  so  that  your  arms  are  outside  your  legs.  Put  your 
spine  into  neutral,  take  a  breath  in,  brace  your  core,  tighten  your  lats,  and  stand  up  while 
keeping  the  back  neutral  the  entire  lift.  Reset  your  breathing  and  brace  at  the  top  before 
lowering  the  bar  back  down  for  the  next  lift.  You  should  be  pulling  the  bar  aggressively 
upward in this exercise, so no going slow. This is a big and powerful lift.  

Movement Reference:​ ​Barbell Rack Pull Video  

3. Hands Elevated Push Up  
Ramp Up Sets:​ 3x4@45  

Working Sets:​ 3x8@45  

Coaching  Notes: Place your hands on a flat bench shoulder-width apart. Step your legs back 
onto  the  floor,  one  at  a  time,  so  that  you’re  in  a  push  up  position.  Squeeze  your  glutes, 
tighten  your  core,  and  rotate  your  shoulders  down  and  back  before  lowering  your  chest 
down  to  the  bench.  Make  sure  that  as  you  go down, your elbows are tucked into your sides 
and  don’t  flare  out.  Once  you  get  to  where your chest slightly touches the bench, push back 
up  to  the  starting  position.  It’s  very  important  that  throughout  this  movement,  your  body 
remains  in  a  straight  line.  Your  spine  and  neck  should  remain  in  a  neutral  position,  so  be 
careful not to tuck your head down or lift it up.  

Movement Reference:​ Hands Elevated Push Up Video  

 
   
 
68 
 

4. Prone Dumbbell Rear Delt Raise  
Ramp Up Sets:​ 3x15@45  

Working Sets:​ 3x15@45  

Coaching  Notes:  Get  a  bench  that’s  inclined  to  a  45-degree  angle.  Take  a  dumbbell  in  each 
hand,  and  set  up  with  your  chest on the bench and your head just off the back of the bench. 
Your  arms  should  be  straight  down  from  your  shoulders,  with  your  palms  turned  in 
towards  one  another.  Dynamically  drive  your  hands  out  and  up,  so  that  your  arms  are  out 
to  each  side  in  line with your shoulders, before lowering back down to the starting position. 
Squeeze  the  glutes  throughout  this  movement,  and  make  sure to have your feet on the floor 
on either side of the bench to ensure your body is stable.  

Movement Reference:​ ​Prone Dumbbell Rear Delt Raise Video  

5. Dumbbell Suitcase Carry  
Ramp Up Sets:​ 1x30sec@30 (per side)  

Working Sets:​ 4x30sec@30 (per side)  

Coaching  Notes:  This  is  as  straight-forward  as  it  gets! Grab a heavy dumbbell and hold it to 


your  side.  You  will  be  walking  for  30  seconds  slow  and  controlled.  Keep  the  spine, 
shoulders  and  pelvis  in  neutral,  and resist the urge to drop the dumbbell. Switch hands and 
carry  the  dumbbell  back  to  the  starting  point  for  another  30  seconds.  Then  rest  30 seconds 
between bouts of carries.  

Movement Reference: ​Dumbbell Suitcase Carry Video  

Day 6 – Recovery Day  

Day 7 – OFF  
   

 
69 
 

Phase 3 (3 weeks)  
 

Congratulations,  you’ve  made  it  to  the  last  phase  of  the  Foundations  of  FHT.  And  hey,  you 
earned  this  and  it’s  something  to  be  damn  proud  of.  You  have  6-weeks  of  foundational 
training  under  your  belt.  You’ve  worked  hard  to  learn,  perfect  and  master  your  big 
movement  patterns  while  also  challenging  yourself  with  weights  and  intensity.  It’s  time  to 
make  the  jump  into  the  final  phase  of  Foundations  before  jump  starting  your  12-week  FHT 
experience. You ready?! 

The  last  step  of  the  Foundations  of  FHT  consists  of  getting  a  barbell  in  your  hands  and 
executing  some  staple  strength  movements  with  confidence  and  prowess.  Yes,  we’ll  be 
barbell  box  squatting like the powerlifters, bench pressing like the NFL guys and deadlifting 
with smooth and solid movements that will create resiliency throughout your body. 

The  goal  here  is  to  use  this  3-week  training  block  and  move  up  in  weights  slowly, 
challenging  your  system  and  your  movements  each  and  every  training  day.  I’ve  also 

 
70 
 
boosted  up  the  intensity  of  your  cardio  and  conditioning  which  should  help  expedite  your 
fitness goals as well. 

In  case  you  were  wondering,  many  of  the  strategically  chosen  movements  from  this phase 
of  training  will  mirror  some  of  the  movements in the FHT program, and that’s been done by 
design.  I  want  you  all  to  not  only  get  a  taste  of  the  FHT  program  and  the  exercises  which 
make  it  so  effective,  but  also  mentally  prepare  yourself  for  the  challenge  coming  up  and 
gaining confidence in each and every rep you execute in this last foundational phase. 

Yes,  this  phase  will  be  a  challenge,  but that’s what you’re here for; to revolutionize the way 


you  feel,  function  and  look.  This  block will take you to the promised land, and it’s up to you 
to  execute  these  training  days  to  the  best  of  your  mental  and  physical  abilities  to  earn  the 
right to step through the doors to Functional Hypertrophy Training. 

Place  an  emphasis  on  your  movement  quality,  on  your  recovery,  and  of  course  your 
nutrition.  You’ve  come  this  far,  and  you  are  so  close  to  earning  the  right  to  train  on  one  of 
the  most  exciting  programs  in  the  industry.  And  guess  what?  By  crushing  this  last phase of 
training,  you  will  no  longer  be  a  “new”  lifter.  You’ll  have  been  battle  tested  and challenged 
to  the  point  of  forging  ahead  with  a  solid  foundation  laid.  Go  all  in  and  you  will  succeed. 
Enough talk, let’s get after it! 

Day 1 – Total Body Squat Emphasis  
Congratulations,  you’ve  made  it  to  the  last  phase  of  the  Foundations  of  FHT  program!  You 
have  put  in  the  work  over  the  course  of  the  last  two  phases  of  squat  emphasized  training 
days,  so  yes,  you’ve  earned  the  right to get that barbell on your back and squat! This will be 
the focus of this training day. 

Before  we  get  into  the  barbell  box  squat,  we  will  be  loading  up  another  one  of  my  favorite 
glute  and  hamstring  builders,  the  ​Barbell  Hip  Thrust​.  Essentially,  we  are  using  the  same 
barbell  and  movement  pattern  as  last  month,  but  just  increasing  the  available  range  of 
motion  by  elevating  your  back  and  arms  onto  a  bench.  This will train the glutes harder and 
open up your function as well. 

Now,  we  are  going  to  get  back  to  the  box  that  you  used  in  the  first  phase  of  training,  and 
instead  of  holding  a  dumbbell  in  the  “goblet”  position in front of your chest, we are going to 
trade  that  in  for  a  barbell  on  your  back  for  a ​Barbell Box Squat​. Ensure that you grip the bar 
hard  and  keep  your  core  tight,  and  from  there,  it’s  the  same  movement  pattern  so  you 
should be more than ready! 

 
71 
 

After  a  big  movement  like  the  barbell box squat, which puts compression through the spine 


and  hips,  the  best  way  to  “decompress”  those  regions  is  by doing a free hanging movement 
like  the  ​Band-Assisted  Chin  Up​!  Again,  it’s  the  same  pull  up  movement  pattern,  but  your 
hands  will  be  turned  so  that  your  palms  facing  back  towards  you  (this  is  called  a 
“supinated” grip). This will stimulate the biceps a bit more. 

And  to  finish  off  this  day  we  are  going  back  to  some  staples  that  you  will  see  in  the  FHT 
program,  which  are  the  ​Push  Up  and  the  ​3-Way  Plank​.  By  now,  you  should  have  worked 
your  way  down close to the floor for push ups, so if you’re ready, go off the ground for these. 
If  you  aren’t  quite  ready,  no  worries!  Do  the  hands  elevated  variation  and  knock  these  out 
with perfect form. 

The  progression  of  the  3-way  plank  is  not  to  add  more  time  to  the  movement,  but  rather 
squeeze  harder  and  turn  on  the  core,  hips  and  shoulders  with  greater  amounts  of  tension 
than  the  month  before.  Also,  feel  free  to  add  a  few  additional  sets  of  this  if  you  want  to 
hammer  home  these  planks,  which  are  highly  advantageous  for  everything  involving 
strength and function. 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Barbell Hip Thrust  
Ramp Up Sets:​ 2x8@45  

Working Sets:​ 4x8@45  

Coaching  Notes:  The  hip  thrust  setup  can  be  a  little  tedious,  but  let  me  tell  you,  it’s  worth 
the  extra  time  getting  everything  locked  in.  Use  a  standard  weight  bench  and  get  it 
stabilized  on  a  rack  or  with  dumbbells  or  plates  on  the  opposite  side  to  ensure  that  the 
bench  does  not  slip  out  from  under  you.  Once  the  bench  is  stabilized,  place  standard 
diameter  45  pound  plates  or  lighter  bumper  plates  onto  a  barbell.  You  need  the  bigger 
plates  so  that  you  can  easily  slip  under  the  bar  to  get  the  movement  set  up  without having 
to  pick  the  bar  up  from  the  ground  and  place  it  on  your  lap.  The  next  step  is  to  place a pad 
between  you  and  the  bar  to  avoid  any  irritation  at  the  front  side  of  the  hips.  Once  we have 

 
72 
 
these  setup  variables  accounted  for,  it’s  time  to  get  into  the  movement  itself.  You  will  be 
positioning  your  back  up  against  the bench at approximately the level of the bottom of your 
shoulder  blades.  The  bar  will  be  resting  on  your  lap,  and  your  knees  and  hips  will  be  bent 
with  approximately  a  vertical  shin  angle.  Once  the  barbell is positioned, drive your hips up 
and  squeeze  your  glutes  for  a  full  second  at  the  top  of  the movement, before lowering back 
down  to  where  the  plates  contact  the  floor  again.  Make  sure  to  lower everything down in a 
slow and controlled manner.  

Movement Reference:​ ​Barbell Hip Thrust Video 

 
2. Barbell Box Squat  
Ramp Up Sets:​ 2x6@45  

Working Sets:​ 4x6@45  

Coaching  Notes:  Stay  tight  through  the  core,  and  use  a  bit  of  a  wider  stance  on  this  one. 
Control  the  descent  and  come to a complete seated position at the bottom of the movement. 
With  a  slight  rocking  mechanism,  come up explosively and squeeze the gluteal group at the 
top  of  every  rep  for  a  full  second  before  moving  onto  the  next  rep.  This  will  ensure  tension 
throughout the movement.  

Movement Reference:​ ​Barbell Box Squat Video  

 
3. Band-Assisted Chin Up  
Ramp Up Sets:​ 2x5@45  

Working Sets:​ 4x10@45  

Coaching Notes: For this movement, the band assists you by deloading your weight, making 
it easier to complete the chin up movement. To get set up, grab a band (the thicker the band, 
the  easier  the  chin  up  will  be) and wrap it around the bar that you’ll be pulling up on. You’ll 
need  a step or a box to stand up on to make sure that you can reach the bar. Once it’s around 
the  bar,  pull  the  band  down,  bend  your  knee  (you  can  use  whichever  leg  you  want),  and 
place  your  knee  onto  the  bottom  of the band (keep your other leg on the step/box). Grab the 
bar  in  an  underhand  position  so  that  your  fingers  are  facing  towards  you.  Take  your  back 
leg  off  of  the  step/box  and  lower  yourself  all  the  way  down  until  your  arms  are  straight, 
 
73 
 
before  pulling  right  back  up  so  that  your  face is in line with the bar. Make sure to keep your 
head  straight  and  your  spine  in  neutral-  don’t  let  your  chin  point  up  or  down  at  any  point. 
Keep  your  core  engaged  and  a  hollow body position to decrease extension stress on the low 
back as well.  

Movement Reference:​ ​Band-Assisted Chin Up Video  

4.Push Up or Hands Elevated Push Up  
Ramp Up Sets:​ 2x5@45  

Working Sets:​ 4x10@45  

Coaching  Notes:  If  you’ve  been  able  to  progress  to  a  push up from the ground, great!  If not, 
just  keep  with  the  hands  elevated  version. Place your hands on a flat bench shoulder-width 
apart.  Step  your  legs  back  onto  the  floor,  one  at  a  time, so that you’re in a push up position. 
Squeeze  your  glutes,  tighten  your  core,  and  rotate  your  shoulders  down  and  back  before 
lowering  your  chest  down  to  the  bench.  Make  sure  that  as  you  go  down,  your  elbows  are 
tucked  into  your  sides  and  they  don’t  flare  out.  Once  you  get  to  where  your  chest  slightly 
touches  the bench, push back up to the starting position. It’s very important that throughout 
this  movement,  your  body  remains  in  a  straight  line. Your spine and neck should remain in 
a neutral position, so be careful not to tuck your head down or lift it up.  

Movement Reference:  

Push Up Video 

Hands Elevated Push Up Video  

5. 3-Way Plank  
Ramp Up Sets:​ None  

Working Sets:​ 5x20sec@30 (per side)  

Coaching  Notes:  This  is  the  same  plank  progression  that  you  did  in  Phase  2.  The  3-Way 
plank  will  consist  of  doing  both  sides of the side plank for 20 seconds, then finishing off the 
round  with  the  RKC  plank  for  20  seconds.  So  this  will  be  60  total  seconds  of  planking  in 
three different positions per set, with a 30 second rest period between the sets.  

Movement Reference:​ ​3-Way Plank Video  

   

 
74 
 

Day 2 – Interval Conditioning 
(Optional)  
We’ve  now  built  up  your  cardio  and  conditioning  base,  so  now  it’s  time  to  start  being  an 
athlete  again  and  reaping  the  benefits of moving well. What does that mean? It’s time for us 
to run, and yes, more than just a jog. 

This  phase  we  will  be  increasing  the  speed  of  the  running  intervals  and  getting  into 
something  I  like  to  call  the  slow  sprint.  A  sprint  is  a  full  effort  explosive  movement,  and 
that’s  not  what  we  are  doing  here.  We  are  simply  running  a  little  faster  in  the  work phases 
of these intervals to the point where you start going decently fast. 

So  before  we  move  forward,  let  me  caution  you  all,  especially  those  of  you  who  are 
choosing  to  do  your  interval  work  outside.  We  are not in the business of pulling hamstrings 
and  getting  injured,  so  be  smart  about  your  speed.  Work  up slowly and reap the benefits of 
the foundations that you are laying down with this program.  

For  reference,  if  you  are  on  the  treadmill,  the  speed  usually  only  goes  up  to  12.5  miles  per 
hour.  That  is  the  top  speed  I want you at on the treadmill or outside, but most of you will be 
working between 7-10 miles per hour and getting a great training effect. 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Treadmill Sprint Intervals  
Ramp Up Sets:​ None  

Working Sets:​ 20x20sec@40  

Coaching  Notes:  You’re  going  to  increase  the  speed  and  intensity  this  month,  moving  from 
Jog Intervals to full Sprint Intervals. Run fast at a full sprint for 20 seconds, then jump off the 
treadmill  by  keeping  your  feet  on the rails to rest for 40 seconds. Over the course of the next 

 
75 
 
few  weeks  on  this  phase,  you  can  get  a  little  faster  each  time  to  continue  to  challenge 
yourself.  

Movement Reference:​ ​Treadmill Sprints Video  

Day 3 – Total Body Press Emphasis  
I  love  to  program  these  last  phases  as  this  is where the real magic happens not only in your 
performance,  but  also  how  you  start  to  transform  your  body  and  kick  it  into  overdrive, 
ready for more challenges, years to come! 

We  are  starting  this  training  day  off  again  with  the  staple  ​Band  Pull  Apart  movement.  As 
you  continue  to  get  stronger,  either  grab  the  band  closer  to  add  more  resistance  to  the 
movement or use a thicker band which will do it for you. Always progressing! 

Keeping  the  barbell  in  your  hands,  we  are  moving  onto  the  ​Incline  Barbell  Bench  Press  to 
change  the  angle  of  pressing  and  work  a  different  angle  from  the  same  foundational 
movement  pattern.  Remember,  you  will  not  be  as  strong  on  an  incline  press  as  the  flat 
bench  press,  so  ramp  up  your  weights  accordingly and ensure that you get all the reps with 
great form and technique! 

Next  we  are  going  back  to  the  single  leg  variations  and  challenging  you  with  a  relatively 
simple  movement  that  will  create  one  hell  of  a  pain-free  training effect. The ​Dumbbell Step 
Up  ​movement  allows  you  to  move  your body through space, and also to defy gravity. Move 
slowly  and  under  control,  and  these  will  smoke  you  in  a  smart  way.  I  want  your heart rate 
up  on  these  and  you  huffing  and  puffing  after  work  sets.  Work  hard  to  breathe  deep 
between sets and get your heart rate down. 

We  are  going  to  finish  off  the  back  with  the  ​Low  Row  ​movement  again  that  should  be  a 
challenge  for  your  back  and  cause  a  huge  pump  through  the  active  muscles.  Get  stronger 
over  time  on  these  and  challenge  yourself  with  weight  as  this  is  a  safe  position  to  work 
from. 

To  progress  your  core  work,  we  are  going  to  work  in  a  great  movement  called  the  ​Pallof 
Press​,  which  is  an  anti-rotation movement. Simply put, as you press the band out in front of 
you,  it will make your core want to rotate, and your job is to stay solid and stable. This looks 
simple,  but  you’ll  quickly  realize  that  this  movement  is  a  challenge  and  will  require  you  to 
mentally  and  physically  focus  on  each  and  every rep in order to execute it the way I want it 
to be done. 

 
76 
 

Let’s get a serious training effect today and keep moving forward! 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Band Pull Aparts  
Ramp Up Sets:​ 2x8@30  

Working Sets:​ 4x15@30  

Coaching  Notes:  Grab  the  band  shoulder  width apart in front of your chest and contract the 


backs  of  your  shoulders  to activate the rhomboids (muscles between your shoulder blades) 
and  posterior  deltoid  (muscles  on  the  backs  of  your  shoulders).  Really  drive  the  shoulder 
blades down and together on this one. These are great for posture and shoulder prehab.  

Movement Reference: ​Band Pull Apart Video  

2. Barbell Incline Bench Press  
Ramp Up Sets:​ 2x8@45  

Working Sets:​ 4x8@45  

Coaching  Notes:  We  will  first  be  placing  a  bench  at  a  30-45  degree inclined angle. This can 
be  done  by  using  an  adjustable  bench  and  positioning  it  up  2-3  notches,  or using 3-4 plates 
under  the  head  of  a  standard  flat  bench.  This  is  going  to  be  very  similar  to  the  flat  bench 
bench  press  that  we  did  in  Phase  2,  but  because  of  the  incline  of  the  bench  here,  the  bar 
path  and  range  of  motion  will  differ  slightly.  Place  your  hands  about  shoulder  width  apart 
and  grab  the  bar.  Once  you  take  the  bar  off  the  rack,  press  your  shoulders  into  the  bench, 
squeeze  your  glutes,  and  tighten  your  core.  Then  bring  the  bar  slowly  down,  but  only  to 
where  you  get  to  2-3  inches  over  your  chest  (don’t  go all the way down and touch the bar to 
your  chest),  pause  it  there  for  a  split  second  and then explode it up to a 1-second lock out at 
the  top  where  you  are  actively  trying  to  squeeze  your  pecs  and  shoulders  to  maximize 
tension.  Also  take  note  that  the  bar  will  come  down  directly  over  your  upper  chest  in  a 

 
77 
 
slightly  higher  position  than  the  bar  path  of  the  flat  bench  press.  I  want  you  to  go  heavy 
enough where you lose speed, but not too heavy where you lose proper form.  

Movement Reference:​ ​Barbell Incline Bench Press Video  

3. Dumbbell Step Up  
Ramp Up Sets:​ 2x10@45  

Working Sets:​ 4x10@45  

Coaching  Notes:  Get  a  box  or  weight  bench  and  dumbbells  in  each  hand.  Hold  the 
dumbbells  straight  down  at  your  sides,  step  up  onto  the  box/bench,  and  then  lower  your 
back  leg  down  to  the  floor  while keeping the front foot up on the box/bench. Make sure that 
you  are  lowering  back  down  in  a  controlled  manner,  and  not  plopping  the  back  foot  down 
on  the  ground.  This  movement  is  notorious  for  cheating  so  be  sure  that  you do not push off 
your  bottom  foot  when  you  step  up,  but  try  to  isolate the foot that is elevated up on the box 
throughout the entire set. A little weight here goes a long way, so start off light.  

Movement Reference:​ Dumbbell Step-Up Video  

 
4. Neutral Grip Low Cable/Band Row  
Ramp Up Sets:​ 2x10@45  

Working Sets:​ 4x20@45  

Coaching  Notes:  Setup  on  the  low  cable  row  machine  and  use  a  slow  tempo,  pulling  back 
and  pausing  for  a  second  on  the  back  side  of  the  movement.  Really  work  this  movement 
and  “feel”  the  back  muscles  working.  You  want  to  maintain  great  form  throughout  all  10 
reps.  If  you  don’t  have  access  to  a  low  cable  row  machine,  you  can  do the banded low row 
variation.  To  set  this  up,  wrap  the  band  around  the  bottom  part  of  the  squat  rack  or  pole, 
and  sit  on  a  bench  or  box  that’s  bench-height.  Execute  the  movement  the  same  way  as  I 
explained the low cable row. 

Movement Reference:  

Neutral Grip Low Cable Row Video  

Neutral Grip Banded Low Row Video  

 
78 
 

 
   

 
79 
 

5. Banded Half Kneeling Pallof Press  
Ramp Up Sets:​ None  

Working Sets:​ 5x10@30 (per side)  

Coaching  Notes:  You  will be hooking a band around a stable surface such as a squat rack or 


pole  for  this  one.  It should be at chest height when you are kneeling on the ground. Kneel on 
the  knee  that  is  closest  to  the  side  the  band  is  on  in  perfect  posture  with  glutes  squeezing 
and  the  core  strong.  Take  the  band  in  front  of  you,  making  sure  there  is  tension  through  it, 
and  grab  it  with  both  hands  interlocked  at  the  fingers.  To  start,  position  the  band  right  in 
front  of  your  chest,  then  slowly  press  it  directly  out  in  front  of  your  chest,  pause  for  a  full 
second,  and  then slowly bring it back into the chest. Take another slight pause at your chest 
before  bringing  it  out  again.  This  should  be  slow  and  controlled  at  all  times.  Do  10  reps  on 
each side then take your 30 second rest period.  

Movement Reference:​ ​Banded Half Kneeling Pallof Press Video  

   

 
80 
 

Day 4 – High Intensity Interval Training 
(Optional)  
Simple  stuff  here  from  an  execution  standpoint,  but  I want you to be pushing yourself from 
an  intensity  standpoint.  Your  base  conditioning  should  be  improving  by  the  week  in 
preparation  for  FHT,  so  this  is  the  last  step  that  will  challenge  you  and  see  what  you  are 
made of.  

The  ​Bike  Sprints  can  sky  rocket  your  heart  rate quickly, but the game is to get the heart rate 


and  respiratory  rate  down  as  quickly  as  possible  so  you  can  head  into  each  interval  round 
with full effort.  

Again,  I  want  you  to get out of your comfort zone on this training day. This isn’t supposed to 


be  a  breeze,  but  rather  a  test  of  your  willpower.  Work  hard  now  and  continue  your 
progression, as that metabolic engine will pay off big moving into 12-weeks of FHT. 

Schedule: 
*Dynamic Warm Up  

And then: 

1. Bike Sprints Ramp Up Sets: None  
Working Sets:​ 20x30sec@30  

Coaching  Notes:  Now  that  we  have  some  experience  with  the  exercise  bike  intervals  from 
the  previous  phases  of  training,  we  are  going  to  turn  up  the  intensity.  The  goal  here  is  to 
work  as  hard  as  you  can  for  30  seconds  (aka  a  sprint),  then  take  your  feet  totally  off  the 
pedals  (if  the bike allows without turning off) and resting for only 30 seconds. If you need to 
keep  the  pedals  moving  to  make  sure  the  bike  doesn’t  turn  off,  go  as  slow  as possible. This 
will  create  a  cumulative  effect  after  the  20  rounds,  something  we  call  a  heart  rate  ramp. 
Each  round,  you  will  not  have  enough  time to fully recover, so your heart rate will continue 
to  elevate  each  and  every  round.  Push  it  as  hard  as  you  can  here  and  again concentrate on 
deep breathing in the rest periods.  

Movement Reference:​ ​Bike Sprints Video  

 
81 
 

Day 5 – Total Body Hip Hinge Emphasis  
This  is  your  last  training  day  in  the  Foundations  of  FHT  program,  so  make  it count! We are 
focusing  on  the  king  of  all movements today, the deadlift! We will also work some other big 
movements  around  the deadlift to create a great training effect that you’ve been working for 
over the course of the last two phases of training. 

Starting  the  day  off  focusing  on  back  development  and  activation  with  the  ​3-Point  Single 
Arm  Dumbbell  Row  will  act  as  an  extended  warm  up  after  the  dynamic  warm  up  routine. 
Work  hard  on  these  sets  and  push  the  weights  up  little  by  little  keeping  great  form 
throughout. 

After  the  rows,  you’ll  be  ready  to  pull  from  the  floor.  Take  the  form  and  technique that you 
have  perfected  from  the  RDL  in  the  first  phase  and  the  rack  pull  in  the  second  phase  and 
transfer  that  into  the  ​Barbell  Deadlift​.  Stay  tight,  keep  great  tension  and  position  with  a 
neutral spine and drive the barbell up under control. 

Again,  we  are  focusing  on  movement  quality  here,  so  before  you  increase  your loads, have 
100% confidence in your movement patterns that they look and feel good. 

For  our  upper  body  emphasized  movements  of  this  training day, we will be pressing with a 


new  hand  position  and  also  finishing  off  the  training  day  with  the  face  pull  to  train  the 
shoulders directly. 

The  ​45-degree  Dumbbell  Bench  Press  places  your  hands  in  a  position  that  is  not  quite  a 
traditional  grip,  and  not  quite  neutral,  but  in  between  the  two.  This  will  challenge  the 
stability  of  the  shoulder,  and  is  more  joint  friendly  for  most  people.  It’s  all  about becoming 
resilient in multiple positions and setups. 

I  want  you  to  work  hard  on  these  ​Face  Pulls  and  really  fight  through  some  tough  sets  that 
will  leave  your  back  and  shoulders  burning  and  pumped  up  like  no  other.  When  you  feel 
this happen, work hard to keep your form and rhythm in the movement. 

We  will  end  this  training  day  with a novel loaded carry variation, the ​Cross Body Dumbbell 


Carry​.  This  involves  a dumbbell down at one side, similar to the suitcase carry, but with the 
opposite  hand  up  overhead  to  change  the  stability  pattern  of  the shoulders. This will really 
test your limits, but again, you’ve earned it! ;) 

 
82 
 

Schedule: 
*Dynamic Warm Up  

And then: 

1. 3-Point Single Arm Dumbbell Row  
Ramp Up Sets:​ 2x12@30  

Working Sets:​ 4x12@30  

Coaching  Notes:  Set  up  on  the  bench,  with  one  knee  up  so  that foot is just off of the back of 
the  bench  and  have  the  other  leg  off  to  the  side  with  a straight knee. Use the opposite hand 
on  the  bench  to  get  into  a  stable  position.  Drive  the  dumbbell  back  towards  your  hip, 
keeping  the  shoulder  pressed  down, and then nice and slow bring it back down into a slight 
stretch.  Then  repeat  the  movement.  No  rest  in  between  sides,  and  30  seconds  of  rest  in 
between sets.  

Movement Reference: ​3-Point Single Arm Dumbbell Row Video  

2. Barbell Deadlift  
Ramp Up Sets: ​2x6@45  

Working Sets:​ 4x6@45  

Coaching  Notes:  To  set  up  on  the  barbell  deadlift,  approach  the  barbell  with  your  feet 
around  shoulder  width  apart  (similar  to  a  squat  stance).  Step  your  feet  under  the  barbell. 
Your  feet  should  be  placed  under  the  barbell  far  enough  so  that  the  bar  covers  your  shoe 
laces.  If  the  bar  is  over  your  toes,  you’re  at  a  disadvantageous  position  and  the  bar  will  be 
too  far  away  from  your  body. Once your feet are set, bend forward and place your hands on 
the  barbell  just  outside  the  knees.  Take  a  deep  breath  in,  tighten  your  core,  and  lift  the 
barbell  up  off  the  floor.  Make  sure  to  keep  your  spine  in  neutral  (don’t  lean  forward  or 
backwards),  squeeze  your  glutes  at  the  top  of  the  movement,  before  lowering  the  barbell 
back down to the floor. Make sure to lower it down in a controlled manner, and don’t just let 
it drop to the floor. Brace that core again and lift the barbell up for the next rep.  

Movement Reference:​ ​Barbell Deadlift Video  

 
83 
 

3. 45-Degree Dumbbell Bench Press  
Ramp Up Sets: ​2x12@45  

Working Sets:​ 4x12@45  

Coaching Notes: This is yet another hand variation of the Dumbbell Bench Press. Set up on a 
flat  bench,  grab  a  dumbbell  in  each  hand,  and  sit  on  the  bench  with  the  dumbbells placed 
on  your  legs  (right  above  your  knees). Getting the dumbbells into position here is extremely 
important,  so  watch  the  set-up  from  the  video  a  few  times.  One  leg  at  a  time,  kick  the 
dumbbells  up  as  you  lie  back  flat  on  the  bench,  and  get  the  dumbbells  into  the  starting 
position  at  your  shoulders.  The  key  with  this  variation,  is  you’re  going  to rotate your hands 
45  degrees so that you’re halfway between the traditional grip and a neutral grip. Make sure 
your  feet  are  out  wide  enough,  brace  your  core,  tighten  your  glutes  and  make  sure 
everything  is  stable.  Then  press  the  dumbbells  directly  up  towards  the  ceiling,  bringing 
them  towards  each  other  at  the  top  (just  slightly),  before  slowly  lowering  them back down 
to  the starting position. Your hands should remain in that 45-degree position throughout the 
movement.  

Movement Reference:​ ​45-Degree Dumbbell Bench Press Video  

4. Cable/Band Face Pull  
Ramp Up Sets: ​2x10@30  

Working Sets: ​4x20@30  

Coaching  Notes:  If  you’re  doing  a  cable  face  pull,  get  a rope attachment (just like the one in 
the  video),  and  hook  it  onto  the  cable  hook.  Set  the  cable  at  the  highest  or  second  highest 
notch  on  the  machine (should be over your head). If you don’t have a cable machine at your 
disposal,  then  do  the  banded  version.  Hook  a  theraband  with  the  handles  around 
something  sturdy  like  a  machine  or  rack  at  about  shoulder  height,  with  both  handles 
available  for  you  to grab in an overhand position. After the set-up, the cable and the banded 
face  pull  variations  are  the  same  in  movement  and execution. Drive your elbows back, and 
bring  your  hands  to  about  nose-height.  Try  and  pinch  your  shoulder  blades  together, 
squeeze  and  hold  for  a  second  on  the  back  part  of  the  movement,  before  letting  your  arms 
back  out  in  a  controlled  manner.  Make  sure  not  to  shrug  your shoulders, so concentrate on 
keeping  them  pressed  down.  Also  make  sure that there is no movement whatsoever in your 

 
84 
 
lower  body,  as  this  should  be  an  isolated  movement  from  your  arms  and  shoulders.  Also 
make sure to maintain a neutral spine, so keep your head looking straight ahead.  

Movement Reference:  

Cable Face Pull Video  

Banded Face Pull Video  

 
5. Cross Body Dumbbell Carry  
Ramp Up Sets:​ None  

Working Sets: ​6x30sec@30  

Coaching Notes: ​I absolutely love the cross body loaded carry for so many different reasons. 
Before  we  get into the specifics, remember that each set consists of one round of 30 seconds 
with  the  left  arm  in  the  up  position,  and  an  additional  30  seconds  with  the  right arm in the 
up  position.  You  will  complete  both  sides  first  then  rest  the  30  seconds.  I  want you to get a 
heavy  dumbbell  in  your  down  hand,  and  a  somewhat  lighter dumbbell in the up hand. Just 
with  any  other  loaded  carry,  we  are  using  short  steps  and  perfect posture. Keep strong and 
stable at the core and shoulders, squeezing everything you have.  

Movement Reference:​ ​Dumbbell Cross Body Carry Video  

Day 6 – Recovery  

Day 7 – OFF 

 
85 

You might also like