Professional Documents
Culture Documents
3D View: Item QTY Part No Description Comments Mass (KG) Per Item
3D View: Item QTY Part No Description Comments Mass (KG) Per Item
A A
2
B INSIDE ONLY
STAMP PART NO. IN THIS AREA B
10mm HIGH LETTERING
TYP
3D VIEW
1301A00182-0
260
C C
130
16
190 260 260
900 36
D D
FRONT VIEW END VIEW
NOTES:
1. For construction & welding procedures see document QSE SOP 7134.
E 2. All welds to be 6mm CFW unless otherwise noted. E
3. Allowance to be made to nominated cutting lengths for weld shrinkage as required.
4. Remove all burrs & sharp edges.
5. Stamp Part No. & Rev (1301A00182-0) in position indicated. 2 3 1301P00512 Spring Mount BRU Base Seat 173 1.43
Total approx mass = 33.3 kg 1 1 1301P01561 Spring Mount BRU Base 173-3-260 900x260x16 Plate 29.0
Material list for 1 off "Spring Mount BRU Base 173-3-260 900x260x16" only. Mass(kg)
Item QTY Part No Description Comments per Item
TOLERANCES UNLESS DIMENSIONS IN DO NOT SCALE
SPECIFIED OTHERWISE MILLIMETRES DRAWING Title Spring Mount BRU Base 173-3-260 900x260x16
F loganag ongg klosa Drn loganag Scale F
0 Initial Document Created 16/11/2010 17/11/2010 29/11/2010 FABRICATION ±2mm 16/11/2010 1:5
Job No Client
MACHINING ±0.25mm
Chkd ongg
Rev Description Rev Drawn Rev Checked Rev Appd ANGULAR ±0.25°
SURFACE FINISH 3.2µm 17/11/2010
Model Spring Mount
Appd klosa Sheet Rev
©Ludowici Ltd 2009 Use restricted to express terms. All rights reserved. DEBURR ALL SHARP EDGES 29/11/2010 A3 www.ludowici.com.au
ABN 88 010 340 566
Drg No 1301A00182 1 of 1 0
1 2 3 4 5 6 7 8