Professional Documents
Culture Documents
Single Phase Smart Meter Using DLMS/COSEM Application Data
Single Phase Smart Meter Using DLMS/COSEM Application Data
Single Phase
PLC Smart Meter
5CTM meters provide robust automated meter 5CTM smart meter integrates a PLC service
reading solutions for distribution companies. node that is automatically identified in the PLC
They integrate energy measurement, load network (plug & play).
profile and Time of Use (TOU) features. These meters implement ZIV’s own technology
Local and remote communication capabilities for PLC standards. It ensures a high-power
enable complete meter operation. This includes transmission without distortion optimized also
data reading, configuration setting changes, for low impedance lines, without affecting line
date synchronization and operation of the built- impedance. High receiver sensitivity and efficient
in breaker. data provide optimized communications over noisy
lines.
Additionally, the meters include a RS-485 port to
remotely access the meter through a modem or
other purposes.
ZIV continually strives to improve products and services. The technical information included in this document is subject to change without prior notice.
5CTM smart meters can be operated using DLMS/ Verification test 1000 pulses / kWh or kvarh
COSEM application data. constant
· Time synchronization.
Optical port According to IEC 62056-21
· Event and alarm recording with a broad set of
manageable events. Connection to RS485 (RJ11) *
external modem (option depending on model)
· Power Quality recording. Voltage variations outside
the established thresholds and long-term voltage
PLC service node Built-in (PRIME 1.4 in CENELEC A band)
interruptions.
· Breaking and reconnection elements for remote Degree of IP51 (according to IEC 60529)
switching operations, power control and demand side protection
management.
· Self-diagnostics and monitoring. Dimensions 212,17 mm x 145,85 mm x 64,03 mm