Professional Documents
Culture Documents
MUP 1 Multi-E 2XCRE 10-2 1.1KW 2.8@25
MUP 1 Multi-E 2XCRE 10-2 1.1KW 2.8@25
(MY)
Created by: Winson Lee
Phone: (+60) 12 294 2913
Email: wcenyang@grundfos.com
Date: 30/12/2021
Qty. Description
1 HYDRO MULTI-E 2 CRE 10-2
GRUNDFOS Hydro Multi-E booster sets are designed for the transfer and pressure boosting of clean water in
waterworks, blocks of flats, hotels, industry, hospitals, schools, etc.
GRUNDFOS Hydro Multi-E booster sets consists of 2 to 3 CR(N)E pumps coupled in parallel and mounted on a
common base frame provided with all the necessary fittings.
Hydro Multi-E is mounted on a common base frame made in black painted mild steel.
On the suction side are fitted a suction manifold ( AISI 316 or EN 1.4571) and two pressure transmitters which are
mounted on an isolating valve.
On the discharge side of the pumps are fitted a non-return valve, an isolating valve, a pressure gauge, two pressure
transmitters mounted on an isolating valve, a diaphragm tank and a stainless steel discharge manifold (AISI 316 or
EN 1.4571).
The Hydro Multi-E is fitted with an on/off-switch for the supply voltage.
The Hydro Multi-E is designed for maintaining a constant pressure regardless of flow changes and fluctuation.
The internal PI-controller regulates the number of running pumps and the speed of the pumps according to the
required flow.
The system can be operated directly on the graphical display of any of the pumps or via Grundfos GO (available as
accessory)
LON
PROFIBUS DP
PROFIBUS IO
BACnet MS/TP
BACnet IP
Modbus RTU
Modbus TCP
Ethernet IP
Cellular 3G/4G
When delivered, the GRUNDFOS Hydro Multi-E booster set is factory tested and ready for operation.
Liquid:
Pumped liquid: Water
Liquid temperature range: 278 .. 333 K
Selected liquid temperature: 293 K
Density: 998.2 kg/m³
Kinematic viscosity: 1 mm2/s
Technical:
Actual calculated flow: 2.8 l/s
Resulting head of the pump: 25 m
Materials:
Pump housing: Cast iron
Installation:
Maximum operating pressure: 1000 kPa
Maximum permissible inlet pressure: PN 10 bar
Flange standard: DIN ISO 7/1
Manifold inlet: R 2 1/2
Manifold outlet: R 2 1/2
Electrical data:
IE Efficiency class: IE5
Power (P2) main pump: 1.1 kW
Mains frequency: 50 / 60 Hz
Rated voltage: 3 x 380-415 V
Rated current: 4.74 A
Start. method: electronically
Enclosure class (IEC 34-5): IP55
Tank:
Volume of pressure tank: 24 l
Diaphragm tank: Yes
Others:
Net weight: 130 kg
Gross weight: 160 kg
Shipping volume: 1.01 m³
Language: Multi
25 100
20 80
15 60
10 40
5 20
2.5 P1 (motor+freq.converter) 10
P2
2.0 8
1.5 6
1.0 4
0.5 2
P1 (motor+freq.converter) = 1.143 kW
P2 = 1.028 kW
NPSH = 2.64 m
0.0 0
364
300
875
813
850
770
Liquid: 1.0 4
Mains frequency: 50 / 60 Hz
813
850
L3
PE
Breaker cabinet
eta
cos phi
0.8 1.6
0.6 1.2
0.4 0.8
0.2 0.4
0.0 0.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 P2 [kW]
n P1
[rpm] [kW]
P1 (motor+freq.converter)
3000 1.2
2000 0.8
1000 0.4
n = 100 %
0 0.0
300
846
364
813
850
875
184
770
Breaker cabinet
RCD
PE
L1
L2
L3