Professional Documents
Culture Documents
C2R-CHY4: Introduction and Features
C2R-CHY4: Introduction and Features
Important Notes
1. A PAC steering wheel interface must be used in conjunction for SWC retention.
2. Only one of the two provided radio harnesses will be used. Remove the factory installed radio to determine the correct harness
for your particular vehicle.
3. Vehicles without a factory amplifier: Connect the aftermarket radio’s front and rear speaker wires to the 22-pin plug.
4. Vehicles with a factory amplifier: The factory amplifier only accepts two audio channels (left and right). The amplifier’s
fading is controlled by data communication from the factory radio. The aftermarket radio does not have the ability to control the
amplifier’s fader. Connect the front outputs of the aftermarket radio to the rear inputs of the 22-pin radio connector. This
will allow navigation voice prompts and Bluetooth calls to be heard. The rear speaker outputs of the aftermarket radio are not
used.
Wiring Connection Chart
Illustration / Schematic
SWC
2
3
4
5
6
7
8
9
9
Connect to Radio
10 11
Specific SWC
Interface
Connection
Vehicle
Aftermarket
Radio
Connections
PAC SWC
Interface
C2R-CHY4
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V2 Page 1
PAC-audio.com Date: 051618
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V2 Page 2
PAC-audio.com Date: 051618