Professional Documents
Culture Documents
Owner's Manual Blu-Ray Disc Player: TM Model No. DMP-BDT220
Owner's Manual Blu-Ray Disc Player: TM Model No. DMP-BDT220
Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT220
P PC VQT3V20
until
2012/01/12
DMP-BDT220_VQT3V20_eng.book 2 ページ 2011年12月5日 月曜日 午後5時35分
Getting started
IMPORTANT SAFETY
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this
device must accept any interference, including interference
INSTRUCTIONS
that may cause undesired operation of this device.
Contains FCC ID: MCLT77H330
Contains IC:2878D-T77H330
This transmitter must not be co-located or operated in
Read these operating instructions carefully before using the unit. conjunction with any other antenna or transmitter.
Follow the safety instructions on the unit and the applicable safety
This equipment complies with FCC/IC radiation exposure
instructions listed below. Keep these operating instructions handy
for future reference.
limits set forth for an uncontrolled environment and meets
1 Read these instructions. the FCC radio frequency (RF) Exposure Guidelines in
2 Keep these instructions. Supplement C to OET65 and RSS-102 of the IC radio
3 Heed all warnings. frequency (RF) Exposure rules. This equipment has very
4 Follow all instructions. low levels of RF energy that is deemed to comply without
5 Do not use this apparatus near water. maximum permissive exposure evaluation (MPE). But it is
6 Clean only with dry cloth. desirable that it should be installed and operated keeping
7 Do not block any ventilation openings. Install in accordance the radiator at least 20cm (77/8q) or more away from person’s
with the manufacturer’s instructions. body (excluding extremities: hands, wrists, feet and ankles).
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that THE FOLLOWING APPLIES ONLY IN THE U.S.A.
produce heat. FCC Note:
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one This equipment has been tested and found to comply with
wider than the other. A grounding-type plug has two blades and the limits for a Class B digital device, pursuant to Part 15 of
a third grounding prong. The wide blade or the third prong are the FCC Rules. These limits are designed to provide
provided for your safety. If the provided plug does not fit into reasonable protection against harmful interference in a
your outlet, consult an electrician for replacement of the residential installation. This equipment generates, uses and
obsolete outlet. can radiate radio frequency energy and, if not installed and
10 Protect the power cord from being walked on or pinched used in accordance with the instructions, may cause harmful
particularly at plugs, convenience receptacles, and the point interference to radio communications. However, there is no
where they exit from the apparatus. guarantee that interference will not occur in a particular
11 Only use attachments/accessories specified by the installation. If this equipment does cause harmful
manufacturer. interference to radio or television reception, which can be
12 Use only with the cart, stand, tripod, determined by turning the equipment off and on, the user is
bracket, or table specified by the
encouraged to try to correct the interference by one or more
manufacturer, or sold with the apparatus.
of the following measures:
When a cart is used, use caution when
moving the cart/apparatus combination to ≥ Reorient or relocate the receiving antenna.
avoid injury from tip-over. ≥ Increase the separation between the equipment and
13 Unplug this apparatus during lightning receiver.
storms or when unused for long periods of ≥ Connect the equipment into an outlet on a circuit different
time. from that to which the receiver is connected.
14 Refer all servicing to qualified service personnel. Servicing is ≥ Consult the dealer or an experienced radio/TV technician
required when the apparatus has been damaged in any way, for help.
such as power-supply cord or plug is damaged, liquid has been FCC Caution: To assure continued compliance, follow the
spilled or objects have fallen into the apparatus, the apparatus
attached installation instructions and use only shielded
has been exposed to rain or moisture, does not operate
interface cables when connecting to peripheral devices.
normally, or has been dropped.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate this equipment.
CAUTION This device complies with Part 15 of the FCC Rules.
RISK OF ELECTRIC SHOCK Operation is subject to the following two conditions:
DO NOT OPEN (1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
including interference that may cause undesired operation.
NO USER-SERVICEABLE PARTS Declaration of Conformity
INSIDE. Trade Name: Panasonic
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. Model No.: DMP-BDT220
The lightning flash with arrowhead symbol, within an Responsible Party:
equilateral triangle, is intended to alert the user to the Panasonic Corporation of North America
presence of uninsulated “dangerous voltage” within One Panasonic Way, Secaucus, NJ 07094
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons. Support Contact:
The exclamation point within an equilateral triangle is
Panasonic Consumer Electronics Company
intended to alert the user to the presence of important Telephone No.: 1-800-211-PANA (7262)
operating and maintenance (servicing) instructions in
the literature accompanying the appliance. THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian
ICES-003.
2 VQT3V20
DMP-BDT220_VQT3V20_eng.book 3 ページ 2011年12月5日 月曜日 午後5時35分
Table of contents
WARNING
Getting started
Unit Getting started
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit. IMPORTANT SAFETY INSTRUCTIONS. . . . 2
≥ Use only the recommended accessories. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4
≥ Do not remove covers. Unit and media care. . . . . . . . . . . . . . . . . . . . 4
≥ Do not repair this unit by yourself. Refer servicing to qualified
Playable media . . . . . . . . . . . . . . . . . . . . . . . 5
service personnel.
Control reference guide . . . . . . . . . . . . . . . . . 7
AC power supply cord
≥ Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs. Connections & Settings
Playback
tablecloths, curtains, and similar items. Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
≥ Do not place the unit on amplifiers/receivers or equipment that Enjoying Network Service
may become hot. The heat can damage the unit. (NETFLIX, etc.) . . . . . . . . . . . . . . . . . . . . . 19
Batteries Home Network feature. . . . . . . . . . . . . . . . . 20
Mishandling of batteries can cause electrolyte leakage which can
VIERA LinkTM “HDAVI ControlTM” . . . . . . . . . 21
damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer. Settings
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
Option menu . . . . . . . . . . . . . . . . . . . . . . . . 22
≥ Do not mix old and new batteries or different types at the same
time. Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 25
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for Reference
Settings
(Inside of product)
VQT3V20
3
DMP-BDT220_VQT3V20_eng.book 4 ページ 2011年12月5日 月曜日 午後5時35分
4 VQT3V20
DMP-BDT220_VQT3V20_eng.book 5 ページ 2011年12月5日 月曜日 午後5時35分
Playable media
Getting started
Type Logo examples Type detail Playable contents
BD-Video Video
DVD-Video Video
DVD-R
Video, AVCHD,
AVCHD 3D,
MKV, JPEG,
DVD MPO, FLAC, MP3,
WAV
DVD-R DL
CD MKV, JPEG,
CD-R
— MPO, FLAC, MP3,
CD-RW
Music [CD-DA], WAV
≥ See pages 6 and 37 for more information on the types of content that can be played.
VQT3V20
5
DMP-BDT220_VQT3V20_eng.book 6 ページ 2011年12月5日 月曜日 午後5時35分
6 VQT3V20
DMP-BDT220_VQT3V20_eng.book 7 ページ 2011年12月5日 月曜日 午後5時35分
Getting started
2 TV operation buttons
10 You can operate the Panasonic TV through
1
the unit’s remote control. (Depending on the
2 11 TV these buttons may not work.)
[Í TV] : Turn the television on and off
12 [AV] : Switch the input select
[i j VOL] : Adjust the volume
3 13
3 Select title numbers, etc./Enter numbers or
14 characters
15 [CANCEL] : Cancel
4 Basic playback control buttons (> 16)
5 Show status messages (> 17)
4 6 Show Pop-up menu/Top menu (> 17)
7 Show Option menu (> 22)
8 Color buttons
5 16 Used for various purposes depending on the
17 display
9 Transmit the remote control signal
18
6 10 Open or close the disc tray (> 14)
11 Show NETFLIX screen (> 19)
19
12 Start up a video communication (> 19)
7 20 13 Setup 3D effects (> 24)
14 Switch on/off Secondary Video
8 (Picture-in-picture) (> 23)
15 Select audio (> 16)
16 Exit the menu screen
17 Show the Home screen of the VIERA
Connect (> 19)
18 Show HOME menu (> 14)
19 [3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 16)
20 Return to previous screen
1 5 10
CALL
SD CARD
VQT3V20
7
DMP-BDT220_VQT3V20_eng.book 8 ページ 2011年12月5日 月曜日 午後5時35分
STEP 1 : Connecting to a TV
Perform either one of the following connections in accordance with your TV input terminal.
≥ Before making any connections, we suggest to temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may
not be displayed properly.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
HDMI IN
HDMI cable
VIDEO IN
L
AUDIO IN
R
Audio/Video cable
8 VQT3V20
DMP-BDT220_VQT3V20_eng.book 9 ページ 2011年12月5日 月曜日 午後5時35分
HDMI AV OUT
Amplifier/receiver
OPTICAL
OPTICAL IN
Amplifier/receiver
VQT3V20
9
DMP-BDT220_VQT3V20_eng.book 10 ページ 2011年12月5日 月曜日 午後5時35分
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
To a household AC outlet
≥ This unit consumes a small amount of AC power (> 37) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
10 VQT3V20
DMP-BDT220_VQT3V20_eng.book 11 ページ 2011年12月5日 月曜日 午後5時35分
Preparation
≥ Obtain your network name (> 12, SSID).
≥ If your wireless connection is encrypted,
please be sure that you know your
encryption key (password).
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
VQT3V20
11
DMP-BDT220_VQT3V20_eng.book 12 ページ 2011年12月5日 月曜日 午後5時35分
∫ “Search for wireless network” To enter your network name (SSID) manually
The available wireless networks will be displayed. If your network name (SSID) is not displayed in
1 Select your network name and press [OK]. step 1, follow these steps.
≥ If your network name is not displayed, 1 To display the network name (SSID) input
search again by pressing the [R] button on screen :
the remote control. Stealth SSID will not be Press [HOME] > select “Setup” > [OK] >
displayed, in this case enter manually. select “Player Settings” > select “Network” >
[OK] > select “Network Settings” > [OK] >
Wireless Settings
Select a wireless network for connection.
select “Wireless Settings” > [OK] > select
“Connection Setting” > [OK] > select
“Manual setting” > [OK]
Network name (SSID) Reception
XXXXXXXXXX 2 Press [OK] to select “SSID” and enter your
XXXXXXXXXX
XXXXXXXXXX SSID.
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX Wireless Settings
Enter your network name (SSID) to connect.
OK
R Search again G B Y
OPTION RETURN
SSID
Set
When your wireless network is encrypted
2 Press [OK] to select “Encryption Key”.
≥ If your wireless network is encrypted, go to step 2.
Wireless Settings
Enter the encryption key (password) of the wireless network.
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates
Encryption Key settings relating to the connection and security of wireless
LAN devices. To see whether your wireless router supports
Set
WPS, check the wireless router operating instructions.
≥ You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 28)
≥ You can redo these settings individually using “Network
3 Enter your encryption key (password). Settings”. (> 28)
≥ Do not use this unit to connect to any wireless network for
Encryption Key (Password) which you do not have usage rights.
l During automatic searches in a wireless network
environment, wireless networks (SSID*) for which you
Shift a b c d e f g 1 2 3 Delete do not have usage rights may be displayed; however,
h i j k l m n 4 5 6 Finish
using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
o p q r s t u 7 8 9 (encryption level, etc.) of the wireless router might change.
v w x y z . @ * 0 # When you have trouble getting online on your PC, perform
Space
/ : ~ _ - , ; ‘ “ the network settings on your PC in accordance with the
Symbols Alphanumeric Other Characters settings of the wireless router.
OK ≥ Please be aware that connecting to a network without
RETURN
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
12 VQT3V20
DMP-BDT220_VQT3V20_eng.book 13 ページ 2011年12月5日 月曜日 午後5時35分
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(> 30, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 30)
VQT3V20
13
DMP-BDT220_VQT3V20_eng.book 14 ページ 2011年12月5日 月曜日 午後5時35分
Preparation
Turn on the television and select the appropriate
video input on the television.
Network
facing the right way up. Blu-ray Disc Player
connected equipment.
Videos/Photos/Music
≥ Use the front USB port when you connect a
USB memory or a USB HDD. The USB port on Disc
the rear panel is only for the Communication Play back the contents. (> 16)
Camera. ≥ When multiple contents are
SD Card
recorded, select the types of
CAUTION USB contents or the title.
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened, Network
and this may cause malfunction.
Network Displays the Home screen of
Service VIERA Connect. (> 19)
Home DLNA Client (> 20)
Network Media Renderer (> 20)
Setup
Player
(> 25)
Settings
SD Card
(> 17)
Management
Changes the background of
Wallpaper
HOME menu.
≥ Items to be displayed may vary with the media.
14 VQT3V20
DMP-BDT220_VQT3V20_eng.book 15 ページ 2011年12月5日 月曜日 午後5時35分
B
USER1 Personalize
2nd user Switching the user
A The user name and icon currently selected ∫ Using color buttons
B Personalize a new user and switch the
Press the color buttons in the Home menu to
users with color buttons.
switch to the user corresponding to the
button.
Personalizing a new user
∫ Using facial recognition
Playback
1 Press [HOME].
(Only when connected to Communication
2 Press a color button that indicates new Camera > 19)
user personalization. 1 Press [OPTION] in the Home menu.
3 Select an item and change the settings
2 Select “Facial Recognition” and press [OK].
according to the indications.
The following items can be set. 3 Turn the face to Communication Camera.
The camera determines the closest face from
Input
Personalize a user name. the face pictures of the personalized users
Nickname
and displays the results.
Personalize a user icon.
4 Press [OK].
Select from illustrations
≥ To redo the facial recognition, press
The image can be selected from [RETURN].
prepared illustrations.
Create from Photos ∫ Using registered smartphones
Select Icon If the Communication camera is
When the unit is turned on using the
connected, you can shoot and registered smartphone, the user who
personalize your photo. registered the smartphone will automatically
≥ You can also select a photo in be selected.
recording media as an icon. ≥ Perform the “Remote Device Settings”. (> 28)
(> 22, “Icon Personalization”)
≥ To use smartphones as a remote control, installation of
dedicated software is required. For more details, refer to
the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
VQT3V20
15
DMP-BDT220_VQT3V20_eng.book 16 ページ 2011年12月5日 月曜日 午後5時35分
Search/Slow-motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
The speed increases up to 5 steps.
≥ Press [1PLAY] to revert to normal playback speed.
Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: [1] (;1) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
16 VQT3V20
DMP-BDT220_VQT3V20_eng.book 17 ページ 2011年12月5日 月曜日 午後5時35分
BD-Video
T1 C1 0:05.14
0:20.52
Play
Enjoying BD-Live
C D With “BD-Live” discs, you can enjoy bonus
Playback
A T: Title, C: Chapter, PL: Playlist contents that use Internet access.
B Elapsed time in the title For this BD-Live function, insertion of an SD card
C Current position is necessary along with Internet connection.
D Total time 1 Perform network connection and settings.
e.g., JPEG (> 10, 11)
Date 11/12/2007
1 / 26 2 Insert an SD card with 1 GB or more free
Size 500 x 375 space.
Manufacturer
Equipment ≥ The SD card is used as the local storage.
3 Insert the disc.
∫ Deleting data/Formatting SD
cards
Select “SD Card Management” in the Home
menu (> 14) , then select “BD-Video Data
Erase” or “Format SD Card” and press [OK].
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 29).
VQT3V20
17
DMP-BDT220_VQT3V20_eng.book 18 ページ 2011年12月5日 月曜日 午後5時35分
Slideshow
Play a slideshow of photos and make various
settings during the playback.
≥ Still pictures displayed as “ ” cannot be played back
with this unit.
≥ When both the music CD and the USB device with
recorded music are inserted into this unit, the music CD
has priority to be played back as background music.
18 VQT3V20
DMP-BDT220_VQT3V20_eng.book 19 ページ 2011年12月5日 月曜日 午後5時35分
(NETFLIX, etc.)
accessed directly by pressing [ ] button,
and NETFLIX can be accessed directly by
You can access information services from the pressing [NETFLIX] button.
VIERA Connect Home screen via the Internet.
2 Select the item and press [OK].
XXXXX
– When wrong time is displayed
Featured Videos
XXXXXXXXXXXXXXXXXXXX
(> 28, “Time Zone”, “DST”)
XXXXXXXXXXX
New York, NY
MORE
BACK
XXXX
≥ If using slow Internet connection, the video may not be
F
39°
Mostly Cloudy Market
XXXX displayed correctly. A high-speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you will not be able to use the VIERA Connect
function. (> 13)
Playback
≥ VIERA Connect Home screen is subject to change without
notice.
Internet
≥ The services through VIERA Connect are operated by their
respective service providers, and service may be
* Images are for illustration purposes, contents may change discontinued either temporarily or permanently without
without notice.
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
Preparation ≥ All features of websites or content of the service may not
≥ Network connection (> 10) be available.
≥ Network setting (> 11) ≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
To enjoy video communication (ex. SkypeTM) : and may be presented in specific languages.
≥ Connect this unit with optional Communication
Camera (TY-CC20W or TY-CC10W).
Depending on your location, this optional
camera may not be available. Please consult
your local Panasonic dealer for advice.
Communication Camera
TY-CC20W or TY-CC10W
VQT3V20
19
DMP-BDT220_VQT3V20_eng.book 20 ページ 2011年12月5日 月曜日 午後5時35分
Server *
Renderer
Controller *
Server
Player
Preparation
Server *
1 Perform network connection (> 10) and +
Renderer Controller
network settings (> 11) of this unit.
2 Perform Home Network settings of the * DMC compatible software should be installed.
connected equipment.
3 Add the contents and folder to the libraries of Preparation
the Windows Media® Player or the Perform steps 1 to 3. (> left )
smartphone, etc. 4 Perform the “Remote Device Settings”. (> 28)
≥ Playlist of Windows Media® Player can play ≥ You can register up to 16 devices.
back only the contents that are stored in the 1 Press [HOME].
libraries.
2 Select “Network”.
1 Press [HOME].
3 Select “Home Network”.
2 Select “Network”.
4 Select “Media Renderer”.
3 Select “Home Network”.
5 Select “Home Network” or “Wi-Fi Direct”
4 Select “DLNA Client”. and press [OK], then follow the indications
≥ The list can be updated by pressing [R] on on the screen.
the remote control.
≥ The connection method can be switched to
6 Operate the DMC compatible devices.
Wi-Fi Direct by pressing [G] on the remote To exit from Media Renderer screen
control. Press [HOME].
5 Select the equipment and press [OK].
6 Select the item to play and press [OK]. For more details, refer to the following website
≥ You may be able to use convenient and the operating instructions for each of the
functions depending on the content by equipment.
pressing [OPTION]. http://panasonic.jp/support/global/cs/
≥ Control Panel (> 23) is displayed once the (This site is in English only.)
playback starts. Press [OK] if the Control
≥ Wi-Fi Direct connection while using Home Network feature
Panel is not displayed, and press is only temporary, and the network connection method
[RETURN] to hide the Control Panel. returns to the original setting when exiting.
≥ Depending on the contents and the connected equipment,
To exit from Home Network playback may not be possible.
Press [EXIT], [HOME] or [POP-UP MENU/TOP ≥ Items displayed in gray on the display cannot be played
back by this unit.
MENU]. ≥ This unit can be played back via connected equipment only
when controlled using DMC.
20 VQT3V20
DMP-BDT220_VQT3V20_eng.book 21 ページ 2011年12月5日 月曜日 午後5時35分
Playback
on the connected TV so that the “HDAVI
Control” function works properly.
≥ The buttons that you can use for this unit vary depending
Also when the connection or settings are on the TV. For details, refer to the operating instructions of
changed, repeat this procedure. the TV.
≥ The operation of this unit may be interrupted when you
press certain buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of
Automatic input switching November, 2011) for Panasonic’s HDAVI Control
compatible equipment. This standard is compatible with
Power on link Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control
functions provided by HDMI which is an industry standard
When the following operations are performed, the known as HDMI CEC (Consumer Electronics Control), is a
input channel of the television will be unique function that we have developed and added. As
automatically switched and the screen of this unit such, its operation with other manufacturers’ equipment
that supports HDMI CEC cannot be guaranteed.
will be displayed. ≥ Please refer to individual manuals for other manufacturers’
When the television is off, the television will equipment supporting VIERA Link function.
automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is
performed
(e.g., Home menu)
VQT3V20
21
DMP-BDT220_VQT3V20_eng.book 22 ページ 2011年12月5日 月曜日 午後5時35分
Option menu
Settings
Operation Menu
A variety of playback operations and settings can
be performed from this menu. ∫ Soundtrack
Available options differ depending on the playing Show or change the soundtrack.
contents and the condition of the unit.
∫ Audio channel
About Multi User Mode
Select the audio channel number.
: Settings of the items with this indication are
saved by the respective users registered in the ∫ Subtitle
Home menu. Change the subtitle settings.
Please refer to page 15 for details about user
registration and switching. ∫ Angle
Select the number of the angle.
1 Press [OPTION].
≥ When playing music, select “Playback ∫ Repeat Play
Settings” and press [OK]. (Only when the elapsed time is being displayed
on the unit’s display.)
e.g., BD-Video
Select the item which you want to repeat.
≥ The items displayed differ depending on the
Operation Menu
Soundtrack 1 ENG DTS-HD MSTR Multi
type of media.
Subtitle
Angle 1
≥ Select “Off” to cancel.
Repeat Play Off
Status
Pop-up Menu
∫ Start Slideshow
Start the slideshow.
2 Select an item and change the settings.
∫ Status
To exit the screen Show the status messages.
Press [OPTION].
∫ Rotate Right
Regarding Language : (> 36) ∫ Rotate Left
Rotate the still picture.
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 14)
∫ Icon Personalization
Set the still picture as your user icon. (> 15)
∫ Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video
appears.
22 VQT3V20
DMP-BDT220_VQT3V20_eng.book 23 ページ 2011年12月5日 月曜日 午後5時35分
∫ Secondary Video
Video Settings
Select on/off of images. The
recording method of original ∫ Picture Mode
video appears. Select the picture quality mode during play.
Video
≥ During search/slow-motion or ≥ If you select “User”, you can change settings in
frame-by-frame, only the “Picture Adjustment”.
primary video is displayed.
Select on/off of audio and the ∫ Picture Adjustment
Soundtrack
language. Specific picture quality settings can be performed.
≥ 3D NR:
∫ Control Panel Reduces the rough noise in the background to
Display the Control Panel. give a greater feeling of depth.
Playing back while using VIERA Link, etc. When “24p Output” is set to “On”, this function
may not operate. (> 25)
e.g., EXIT ≥ Integrated NR:
Smoothes block noise and reduces the
smudging that appears around contrasting
sections of the picture.
∫ Menu
∫ Super Resolution
Display Menu.
Pictures of normal image quality are corrected to
sharp and detailed images when output as 1080i/
1080p from HDMI AV OUT.
Personal Preference ∫ Progressive
Select the method of conversion for progressive
You can access settings to enjoy special features
output to suit the type of material being played.
of this unit from this category.
Settings
Refer to “Video Settings” and “Audio Settings” ≥ When the content is distorted change the
(> 24) for more details on each setting item. settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p
Output” (> 25).
∫ Screen Aspect
Switch the screen mode.
VQT3V20
23
DMP-BDT220_VQT3V20_eng.book 24 ページ 2011年12月5日 月曜日 午後5時35分
∫ Pop-Out Level
(Only when “Full HD” is selected in “3D Type”
(> 27).)
3D position for the Option menu or message
screen etc. can be adjusted during 3D playback.
24 VQT3V20
DMP-BDT220_VQT3V20_eng.book 25 ページ 2011年12月5日 月曜日 午後5時35分
3D
Chroma Process
Detail Clarity
Advanced
0
≥ When playing DVD-Video, set to “On” and
Language
Super Resolution
HDMI Output
1
then set “24p” in “Video Settings” (> 23) to
Network Still Mode (paused video) Auto “On”.
Seamless Play On
Ratings
Black Level Control Lighter ≥ When BD-Video images other than 24p are
System
played, images are output at 60p.
OK
RETURN
≥ 24p : A progressive image recorded at a rate
of 24 frames per second (motion-picture film).
4 Select an item and change the settings. Many BD-Video movie contents are recorded
in 24 frames/second in accordance with the
film materials.
To exit the screen
Press [EXIT].
¾ HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal when the unit is
Settings
VQT3V20
25
DMP-BDT220_VQT3V20_eng.book 26 ページ 2011年12月5日 月曜日 午後5時35分
26 VQT3V20
DMP-BDT220_VQT3V20_eng.book 27 ページ 2011年12月5日 月曜日 午後5時35分
3D Language
∫ 3D BD-Video Playback ∫ Audio Language
Select the playback method of 3D compatible Choose the language for audio.
video software. ≥ If “Original” is selected, the original language of
each disc will be selected.
∫ 3D AVCHD Output ≥ Enter a code (> 36) when you select “Other
Select the output method of 3D AVCHD videos. ¢¢¢¢”.
∫ Subtitle Text
Select a suitable item according to the language
used for MKV subtitles text.
≥ This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen
messages.
Settings
VQT3V20
27
DMP-BDT220_VQT3V20_eng.book 28 ページ 2011年12月5日 月曜日 午後5時35分
28 VQT3V20
DMP-BDT220_VQT3V20_eng.book 29 ページ 2011年12月5日 月曜日 午後5時35分
Registration Type
System
Allow connection to all the
Auto equipment that is accessing ∫ Easy Setting
this unit. You can execute basic settings.
Set the permission of the
connection individually for the ∫ Display Settings
Manual Press [OK] to show the following settings:
equipment that is accessing
this unit.
¾ TV Aspect
¾ Status Messages
Choose whether to show status messages
automatically.
VQT3V20
29
DMP-BDT220_VQT3V20_eng.book 30 ページ 2011年12月5日 月曜日 午後5時35分
∫ Quick Start
Speed of startup from power off is increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase compared to when set to “Off”. (About
the power consumption > 37)
¾Update Now
You can update the firmware manually if a
firmware update is available.
30 VQT3V20
DMP-BDT220_VQT3V20_eng.book 31 ページ 2011年12月5日 月曜日 午後5時35分
Troubleshooting guide
Reference
General operation
Before requesting service, please perform the
following steps. To return to the factory preset.
¾ Select “Yes” in “Restore Default Settings” in
Do you have the latest firmware installed? the Setup menu. (> 30)
Firmware updates may be released to correct
operating irregularities that are discovered To return all settings to the factory preset.
with certain movies. (> 13) ¾ Reset the unit as follows:
4 1 While the unit is off, press and hold [OK], [B]
Make the following checks and visit our and [Y] on the remote control at the same
website for more information. time for more than 5 seconds.
For U.S.A. :
– “00 RET” is displayed on the unit’s display.
www.panasonic.com/help
2 Repeatedly press [1] (right) on the remote
Enter the model number.
control or [Í/I] on the unit until “08 FIN” is
For Canada :
displayed on the unit’s display.
http://www.panasonic.ca
3 Press and hold [OK] on the remote control or
4
[< OPEN/CLOSE] on the unit for at least 3 seconds.
Or visit our website to find a service
center.
This unit is turned off when the input for the
You can find a service center near you easily
TV is switched.
on our website.
¾ This is a normal phenomenon when using VIERA
Other support information: Link (HDAVI Control 4 or later). For details please
“Customer Services Directory (United States read the operating instructions for the TV.
and Puerto Rico)” (> 41) or “Limited
Warranty (Only for CANADA)” (> 42). The remote control doesn’t work properly.
¾ Change the batteries in the remote control. (> 4)
¾ The remote control and main unit are using
The following do not indicate a problem with different codes. If “SET ” is displayed on the
this unit: unit’s display when a button is pressed on the
– Regular disc rotating sounds. remote control, change the code on the
– Image disturbance during search. remote control. (> 30, 34)
– Image disturbance when replacing 3D discs.
The TV tuner mode is not displayed when the
∫ Unit doesn’t respond to remote TV is switched on.
control or front panel buttons. ¾ This phenomenon may occur, depending on the
Press and hold [Í/I] on the main unit for TV setting, when “Quick Start” is set to “On”.
Settings
3 seconds. ¾ Depending on the TV, this phenomenon may
– If still unable to power the unit off, disconnect be prevented by reconnecting the HDMI cable
the power cord, wait 1 minute, then reconnect to a different HDMI input terminal or by
the power cord. changing the HDMI auto connection setting.
– “00 RET” is displayed on the unit’s display. – “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote 2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “06 FTO” is control or [Í/I] on the unit until “03 VL” is
displayed on the unit’s display. displayed on the unit’s display.
3 Press [OK] on the remote control or 3 Press [OK] on the remote control or
[< OPEN/CLOSE] on the unit. [< OPEN/CLOSE] on the unit.
VQT3V20
31
DMP-BDT220_VQT3V20_eng.book 32 ページ 2011年12月5日 月曜日 午後5時35分
This unit does not recognize the USB Video is not output in high-definition.
connection correctly.
¾ Confirm that “HDMI Resolution” in the Setup
¾ Disconnect and reconnect the USB cable. If it menu is set properly. (> 25)
still does not recognize the connection, turn
the power of this unit off and on again. 3D video is not output.
¾ If you connect USB HDD to this unit, use USB ¾ Change the settings as required by the
extension cable that is supplied with the HDD. connected TV format. (> 27, “3D Type”)
¾ Is there a non-3D compatible amplifier/receiver
connected between this unit and a TV? (> 9)
Picture ¾ Are the settings on this unit and the TV
correct? (> 17)
The images from this unit do not appear on ¾ Is the amplifier/receiver that is connected
the television. between this unit and TV on?
Picture is distorted. ¾ Depending on the connected TV, the video
¾ An incorrect resolution is selected in “HDMI being played back might switch to 2D video
Resolution”. Reset the setting as follows: due to changes in resolution etc. Check the
1 While the unit is on, press and hold [OK], [B] 3D setting on the TV.
and [Y] on the remote control at the same
time for more than 5 seconds. 3D video is not output correctly as 2D.
– “00 RET” is displayed on the unit’s display. ¾ Select “Set before play” in the Setup menu,
2 Repeatedly press [1] (right) on the remote and select “2D Playback” in the setup screen
control or [Í/I] on the unit until “04 PRG” is displayed when playing 3D discs. (> 27, “3D
displayed on the unit’s display. BD-Video Playback”)
3 Press and hold [OK] on the remote control or ¾ Discs that have recorded titles with Side by
[< OPEN/CLOSE] on the unit for at least 3 side (2 screen structure) and that can be
seconds. enjoyed in 3D are played back in accordance
Set the item again. (> 25) with the settings of the TV.
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output in No subtitles.
bitstream, select “Yes” in “Restore Default ¾ When progressive output is on, closed
Settings” and make proper settings. (> 30) captions/subtitles cannot be displayed.
¾ When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be The subtitles overlap closed captions
output depending on the connection method. recorded on discs.
After removing the disc from this unit, select ¾ Turn off the subtitles or the closed caption
“Set before play” in the Setup menu, and setting on the TV. (> 22)
select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 27) A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. (> 29)
¾ Adjust the aspect setting on the television.
32 VQT3V20
DMP-BDT220_VQT3V20_eng.book 33 ページ 2011年12月5日 月曜日 午後5時35分
Audio Network
VQT3V20
33
DMP-BDT220_VQT3V20_eng.book 34 ページ 2011年12月5日 月曜日 午後5時35分
Messages
On the unit’s display
The following messages or service numbers
appear on the television or unit’s display.
F99
¾ The unit fails to operate properly. Press [Í/I]
On the television
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
Cannot play.
HDMI ONLY
¾ You inserted an incompatible disc (Discs
¾ Some BD-Video discs can only be output with
recorded in PAL video, etc.).
HDMI.
Cannot display on this unit.
NET
¾ You tried to play a non-compatible image.
¾ While connecting to a network.
¾ Confirm “SD” on the unit’s display is not
displayed and re-insert the card.
No PLAY
¾ There is a viewing restriction on a BD-Video
No disc inserted.
¾ The disc may be upside down. or DVD-Video. (> 29)
34 VQT3V20
DMP-BDT220_VQT3V20_eng.book 35 ページ 2011年12月5日 月曜日 午後5時35分
U59
¾ The unit is hot.
The unit switches to standby for safety
reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when
installing the unit.
Hor F
(“ ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
2 Press [Í/I] to turn the power on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
START
¾ The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off the unit.
FINISH
¾ The firmware update is complete.
Reference
VQT3V20
35
DMP-BDT220_VQT3V20_eng.book 36 ページ 2011年12月5日 月曜日 午後5時35分
36 VQT3V20
DMP-BDT220_VQT3V20_eng.book 37 ページ 2011年12月5日 月曜日 午後5時35分
Including the
7 5/16z)
projecting parts
Mass (Weight) Approx. 1.5 kg (3.3 lbs)
VQT3V20
37
DMP-BDT220_VQT3V20_eng.book 38 ページ 2011年12月5日 月曜日 午後5時35分
38 VQT3V20
DMP-BDT220_VQT3V20_eng.book 39 ページ 2011年12月5日 月曜日 午後5時35分
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network
Alliance.
Reference
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
Skype, associated trade marks and logos and the “ ” logo are trade marks of Skype Limited.
VQT3V20
39
DMP-BDT220_VQT3V20_eng.book 40 ページ 2011年12月5日 月曜日 午後5時35分
For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those
individuals at
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable
copy of the corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest.bdplayer@gg.jp.panasonic.com
Source code is also freely available to you and any other member of the public via our website below.
http://panasonic.net/avc/oss/bdplayer/AWBPP12.html
(1) MS/WMA
This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
(4) Vorbis
The software license is displayed when “License” in the Setup menu is selected.(> 30)
(5) FLAC
The software license is displayed when “License” in the Setup menu is selected.(> 30)
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
40 VQT3V20
DMP-BDT220_VQT3V20_eng.book 41 ページ 2011年12月5日 月曜日 午後5時35分
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only) lightning damage, modification, introduction of sand, humidity or liquids,
If your product does not work properly because of a defect in materials or commercial use such as hotel, office, restaurant, or other business or rental use
workmanship, Panasonic Consumer Electronics Company (referred to as “the of the product, or service by anyone other than a Factory Service Center or
warrantor”) will, for the length of the period indicated on the chart below, which other Authorized Servicer, or damage that is attributable to acts of God.
starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new or THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
a refurbished equivalent value product, or (c) refund your purchase price. The “LIMITED WARRANTY COVERAGE”.
decision to repair, replace or refund will be made by the warrantor. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
Product or Part Name Parts Labor PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
Blu-ray Disc Player, Portable Blu-ray Disc servicer, loss of or damage to media or images, data or other memory or
1 year 90 days
Player recorded content. The items listed are not exclusive, but for illustration only.)
Blu-ray Home Theater System 1 year 1 year ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
DVD Player, Portable DVD Player 1 year 90 days WARRANTY.
DVD Recorder 1 year 90 days Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
Rechargeable Batteries (pack), DVD-RAM Not the exclusions may not apply to you.
10 days
Disc (defective exchange) Applicable This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
During the “Labor” warranty period there will be no charge for labor. During the after the warranty period, you may contact your dealer or Service Center. If the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty problem is not handled to your satisfaction, then write to the warrantor’s
excludes both parts and labor for non-rechargeable batteries, antennas, and Consumer Affairs Department at the addresses listed for the warrantor.
cosmetic parts (cabinet). This warranty only applies to products purchased and PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
serviced in the United States or Puerto Rico. This warranty is extended only to WARRANTY, ARE YOUR RESPONSIBILITY.
the original purchaser of a new product which was not sold “as is”.
Mail-In Service Customer Services Directory (United States and Puerto Rico)
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to: Obtain Product Information and Operating Assistance; locate your
Panasonic Exchange Center nearest Dealer or Service Center; purchase
4900 George McVay Drive Parts and Accessories; or make Customer Service and
Suite B Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
McAllen, TX 78503
or, contact us via the web at:
panacare@us.panasonic.com http://www.panasonic.com/contactinfo
When shipping the unit, carefully pack, include all accessories, and send it You may also contact us directly at:
prepaid, adequately insured and preferably in the original carton. When shipping 1-800-211-PANA (7262)
Lithium Ion batteries please visit our Web Site at www.panasonic.com/ Monday-Friday 9am-9pm,
BatteryHandling as Panasonic is committed to providing the most up to date Saturday-Sunday 10am-7pm EST
information. Include a letter detailing the complaint, a return address and
provide a daytime phone number where you can be reached. A valid registered For hearing or speech impaired TTY users, TTY: 1-877-833-8855
receipt is required under the Limited Warranty.
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
Purchase Parts, Accessories and Instruction Books online for all Panasonic
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID
Products by visiting our Web Site at:
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
http://www.pstc.panasonic.com
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF Or, send your request by E-mail to:
PURCHASE. npcparts@us.panasonic.com
You may also contact us directly at:
Limited Warranty Limits And Exclusions 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
This warranty ONLY COVERS failures due to defects in materials or (Monday-Friday 9am-9pm EST)
workmanship, and DOES NOT COVER normal wear and tear or cosmetic Panasonic Service and Technology Company
damage. The warranty ALSO DOES NOT COVER damages which occurred in 20421 84th Avenue South, Kent, WA 98032
shipment, or failures which are caused by products not supplied by the (We accept Visa, MasterCard, Discover Card, American Express, and
warrantor, or failures which result from accidents, misuse, abuse, neglect, Personal Checks)
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge, For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of December 2010
User memo
:
The model number and serial number of this product can be DATE OF PURCHASE
found on either the back or the bottom of the unit. DEALER NAME
Reference
Please note them in the space provided below and keep for DEALER ADDRESS
future reference.
TELEPHONE NUMBER
MODEL NUMBER DMP-BDT220
SERIAL NUMBER
VQT3V20
41
DMP-BDT220_VQT3V20_eng.book 42 ページ 2011年12月5日 月曜日 午後5時35分
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre: Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Support # contact us # email” on www.panasonic.ca
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
42 VQT3V20
DMP-BDT220_VQT3V20_eng.book 43 ページ 2011年12月5日 月曜日 午後5時35分
Inicia la reproducción
Pulse [1PLAY].
Conexión a un televisor con
un cable para audio/vídeo Parada
VIDEO IN
Pulse [∫STOP].
L
AUDIO IN
La posición de detención se memoriza.
R
Función de reanudación de la reproducción
Cable de audio/vídeo Pulse [1PLAY] para reiniciar la reproducción
desde esta posición.
≥ La posición se borra si se abre la bandeja o se pulsa
[∫STOP] varias veces para visualizar “STOP” en el visor
Conexión a un televisor de la unidad.
compatible con HDMI y a un ≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
amplificador/receptor
compatible con HDMI Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
Cable HDMI
Búsqueda/Cámara lenta
HDMI IN
VQT3V20
43
DMP-BDT220_VQT3V20_eng.book 44 ページ 2011年12月5日 月曜日 午後5時35分
Index
A Audio M Media Renderer . . . . . . . 20 V VIERA Connect . . . . . . . 19
Changing audio . . . . . .16 Multi User Mode. . . . . . . . 15 VIERA LinkTM
Language . . . . . . . .27, 36 “HDAVI ControlTM” . . . . . .21
N Network
B BD-Live . . . . . . . . . . . . . .17 Connection . . . . . . . . . . 10 W Wireless LAN . . . . . . . . . 10
D DLNA . . . . . . . . . . . . . . . .20 Setting . . . . . . . . . . 11, 28
24p . . . . . . . . . . . . . . . .23, 25
F File format. . . . . . . . . . . .37 P Pop-up menu . . . . . . . . . . 17 3D . . . . . . . . . . . . . . . . . . . .17
Firmware update . . . . . . . 13 Q Quick Start . . . . . . . . . . . 30
L LAN . . . . . . . . . . . . . . . . .10 R Re-master . . . . . . . . . . . . 24
Language Restore Default
Audio . . . . . . . . . . . . . .27 Settings. . . . . . . . . . . . . . . 30
Menu . . . . . . . . . . . . . .27 Resume play function . . . 16
On-screen. . . . . . . . . . .27 S Subtitle . . . . . . . . . . . . . . 22
Soundtrack . . . . . . . . . .22 U USB device . . . . . . . . . . . . 6
Subtitle . . . . . . . . . .22, 27
®
As an ENERGY STAR Partner, Panasonic
has determined that this product meets the
®
ENERGY STAR guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.